Dynamical decoupling (DD) is a widely-used quantum control technique that takes advantage of temporal symmetries in order to partially suppress quantum errors without the need resource-intensive error detection and correction protocols. This and other open-loop error mitigation techniques are critical for quantum information processing in the era of Noisy Intermediate-Scale Quantum technology. However, despite its utility, dynamical decoupling does not address errors which occur at unstructured times during a circuit, including certain commonly-encountered noise mechanisms such as cross-talk and imperfectly calibrated control pulses. Here, we introduce and demonstrate an alternative technique - `quantum measurement emulation' (QME) - that effectively emulates the measurement of stabilizer operators via stochastic gate application, leading to a first-order insensitivity to coherent errors. The QME protocol enables error suppression based on the stabilizer code formalism without the need for costly measurements and feedback, and it is particularly well-suited to discrete coherent errors that are challenging for DD to address.
Quantum error correction/detection (QEC/QED) and dynamical decoupling (DD) are tools for protecting quantum information. A natural goal is to combine them to outperform either approach alone. Such a benefit is not automatic: physical DD can conflict with encoded subspace, and QEC performance is governed by the errors that survive decoding, not just those DD suppresses. We analyze a hybrid memory cycle where DD is implemented logically (LDD) using normalizer elements of an
[[n,k,d]] stabilizer code, followed by a round of syndrome measurement and recovery (or, in the detection setting, postselection on a trivial syndrome). In an effective Pauli model with physical error probability
p, LDD suppression factor
pDD, and recovery imperfection rate
pQEC (or
pQED), we derive closed-form entanglement-fidelity expressions for QEC-only, QED-only, LDD-only, physical DD, and the hybrid LDD+QEC protocol. The formulas are expressed via a small set of code-dependent weight enumerator polynomials, making the role of the decoder and the LDD group explicit. For ideal recovery LDD+QEC outperforms QEC-only iff the conditional fraction of uncorrectable Pauli errors is larger in the LDD-suppressed sector than in the unsuppressed sector. In the low-noise regime, a sufficient design rule guaranteeing hybrid advantage is that LDD suppresses at least one minimum-weight uncorrectable Pauli error for the chosen recovery map. We show how stabilizer-equivalent choices of LDD generators can enforce this condition. We supplement our analysis with numerical results for the
[[7,1,3]] Steane code and a
[[13,1,3]] code, mapping regions of hybrid-protocol advantage in parameter space beyond the small-
p regime. Our work illustrates the need for co-design of the code, decoder, and logical decoupling group, and clarifies the conditions under which the hybrid LDD+QEC protocol is advantageous.
Noisy Intermediate-Scale Quantum (NISQ) computers suffer from gate errors, decoherence, and readout noise that can severely impact even small quantum circuits. In this work, the application of error mitigation techniques was investigated to a simple two-bit quantum comparator circuit executed on real IBM Quantum hardware. The 2-bit comparator is a basic quantum logic circuit that compares two 2-qubit binary numbers and outputs whether the first number is greater than, equal to, or less than the second. This comparator was implemented using Qiskit and studied its performance under realistic noise. This study on error mitigation concentrates on dynamical decoupling (DD), which is a coherent error suppression strategy that cancels coherent errors by inserting echo pulse sequences during idle time periods. The results demonstrate that dynamical decoupling improves accuracy for the comparator circuit - accurate outcomes are closer to the ideal outcome in the absence of noise. These results show that dynamical decoupling yields notable accuracy improvements for the comparator circuit - bringing measured outcomes closer to the ideal noiseless results. A performance analysis (including a bar-chart of accuracy after mitigation vs. before mitigation simulation) is presented to quantify these improvements. Finally, the implications of applying error mitigation in small quantum circuits and its relevance for near-term quantum computing are also discussed, where such techniques can enhance the reliability of quantum computations in the absence of full quantum error correction.
Dynamic quantum circuits integrate mid-circuit measurements and feed-forward operations to enable real-time classical processing and conditional quantum logic. These capabilities are central to key quantum protocols such as quantum error correction, and have recently demonstrated significant potential for reducing quantum resources, including circuit depth and gate count, across a range of applications. However, executing dynamic circuits on real quantum hardware introduces a critical trade-off: while resource requirements decrease, circuit fidelity degrades due to high error rates of mid-circuit measurements, as well as the decoherence errors accumulated during the extended idle periods introduced by both mid-circuit measurements and feed-forward operations. In this paper, we systematically investigate the impact of standard error mitigation techniques on dynamic circuit applications pertaining to Hamiltonian simulation and ground state estimation of physically relevant systems like the Heisenberg model. We explore dynamical decoupling (DD) as a strategy to suppress decoherence and crosstalk errors during idle windows introduced by mid-circuit measurements and feed-forward delays, and also examine error mitigation via zero-noise extrapolation (ZNE). Through experiments conducted on IBM quantum hardware, we benchmark effective combinations of these strategies that maximize the practical benefits of dynamic quantum circuits in these applications. We demonstrate that a combination of DD and ZNE is effective in mitigating the errors introduced during mid-circuit measurements and feed-forward operations, as well as the errors arising from faulty measurements. This approach yields a energy gap improvement of at least 60% in ground state estimation and reduces observed error of time-evolved states by up to 99% for the Ising model and up to 20% for the Heisenberg model.
Dynamical decoupling (DD) is a key technique for suppressing decoherence and preserving the performance of quantum algorithms. We introduce a measurement-based DD (MDD) protocol that determines control unitary gates from partial measurements of noisy subsystems, with measurement overhead scaling linearly with the number of subsystems. We prove that, under local energy relaxation and dephasing noise, MDD achieves the maximum entanglement fidelity attainable by any DD scheme based on bang-bang operations to first order in evolution time. On the IBM Eagle processor, MDD achieved up to a
450-fold improvement in the success probability of a
14-qubit quantum Fourier transform, and improved the accuracy of ground-state energy estimation for
N2 in the
56-qubit sample-based quantum diagonalization compared with the standard XX-pulse DD. These results establish MDD as a scalable and effective approach for suppressing decoherence in large-scale quantum algorithms.
Dynamic quantum circuits integrate unitary evolution with mid-circuit measurement and feedforward, enabling conditional operations essential for efficient quantum algorithms and foundational for fault-tolerant quantum computation. However, such operations introduce measurement-induced errors and control constraints that are not addressed by conventional error-suppression techniques. Here, we introduce an empirical learning framework that optimizes dynamical decoupling (DD) sequences for dynamic circuits at the level of circuit subintervals and qubit subregisters. Applying empirically learned DD sequences, we achieve a three-fold reduction in average dynamic circuit error rates as measured via randomized benchmarking. We apply the learned strategies to the dynamic circuit implementation of the quantum Fourier transform with measurement (QFT+M), demonstrating nontrivial process fidelity on connected chains of up to 20 qubits. Applying the resulting enhancement, we perform a high signal-to-noise QFT immediately following the preparation of a 10-qubit entangled state. Our results demonstrate that empirically optimized DD systematically outperforms theoretically derived sequences for dynamic circuits, establishing it as an efficient approach for error suppression in dynamic quantum circuits, with direct relevance to applications requiring measurement and feedback such as quantum error correction.
Dynamical decoupling (DD) refers to a well-established family of methods for error mitigation, comprising pulse sequences aimed at averaging away slowly evolving noise in quantum systems. Here we revisit the question of its efficacy in the presence of noisy pulses in scenarios important for quantum devices today: pulses with gate control errors, and the computational setting where DD is used to reduce noise in every computational gate. We focus on the well-known schemes of periodic (or universal) DD and its extension, concatenated DD, for scaling up its power. The qualitative conclusions from our analysis of these two schemes nevertheless apply to other DD approaches. In the presence of noisy pulses, DD does not always mitigate errors. It does so only when the added noise from the imperfect DD pulses does not outweigh the increased ability in averaging away the original background noise. We present break-even conditions that delineate when DD is useful, and further find that there is a limit in the performance of concatenated DD, specifically in how far one can concatenate the DD pulse sequences before the added noise no longer offers any further benefit in error mitigation.