Localization and reduction of superconducting quantum coherent circuit losses
M. Virginia P. Altoé, Archan Banerjee, Cassidy Berk, Ahmed Hajr, Adam M. Schwartzberg, Chengyu Song, Mohammed Al Ghadeer, Shaul Aloni, Michael J. Elowson, John Mark Kreikebaum, Ed Wong, Sinéad M. Griffin, Saleem G. Rao, Alexander F. Weber‐Bargioni, Andrew M. Minor, David Santiago, Stefano Cabrini, Irfan A. Siddiqi, D. Frank Ogletree
Quantum sensing and computation can be realized with superconducting microwave circuits. Qubits are engineered quantum systems of capacitors and inductors with non-linear Josephson junctions. They operate in the single-excitation quantum regime, photons of $27 μ$eV at 6.5 GHz. Quantum coherence is fundamentally limited by materials defects, in particular atomic-scale parasitic two-level systems (TLS) in amorphous dielectrics at circuit interfaces.[1] The electric fields driving oscillating charges in quantum circuits resonantly couple to TLS, producing phase noise and dissipation. We use coplanar niobium-on-silicon superconducting resonators to probe decoherence in quantum circuits. By selectively modifying interface dielectrics, we show that most TLS losses come from the silicon surface oxide, and most non-TLS losses are distributed throughout the niobium surface oxide. Through post-fabrication interface modification we reduced TLS losses by 85% and non-TLS losses by 72%, obtaining record single-photon resonator quality factors above 5 million and approaching a regime where non-TLS losses are dominant. [1]Müller, C., Cole, J. H. & Lisenfeld, J. Towards understanding two-level-systems in amorphous solids: insights from quantum circuits. Rep. Prog. Phys. 82, 124501 (2019)
Quantum sensing and computation can be realized with superconducting microwave circuits. Qubits are engineered quantum systems of capacitors and inductors with non-linear Josephson junctions. They operate in the single-excitation quantum regime, photons of 27μeV at 6.5 GHz. Quantum coherence is fundamentally limited by materials defects, in particular atomic-scale parasitic two-level systems (TLS) in amorphous dielectrics at circuit interfaces.[1] The electric fields driving oscillating charges in quantum circuits resonantly couple to TLS, producing phase noise and dissipation. We use coplanar niobium-on-silicon superconducting resonators to probe decoherence in quantum circuits. By selectively modifying interface dielectrics, we show that most TLS losses come from the silicon surface oxide, and most non-TLS losses are distributed throughout the niobium surface oxide. Through post-fabrication interface modification we reduced TLS losses by 85% and non-TLS losses by 72%, obtaining record single-photon resonator quality factors above 5 million and approaching a regime where non-TLS losses are dominant. [1]Müller, C., Cole, J. H. & Lisenfeld, J. Towards understanding two-level-systems in amorphous solids: insights from quantum circuits. Rep. Prog. Phys. 82, 124501 (2019)
Superconducting quantum computing systems, including coplanar waveguide (CPW) resonators and qubits, are highly susceptible to energy dissipation from two-level systems (TLS) within bulk and interfacial dielectrics. CPW resonators serve as an ideal platform for characterizing these material losses at the single-photon excitation level. Building on recent experimental evidence that interface engineering can mitigate TLS losses, this study employs simulations to evaluate resonator quality factors across various interface modifications. Our results demonstrate that reducing losses at the substrate–air (SA) interface can increase the internal quality factor Qi by up to three orders of magnitude. While etching the SA interface also enhances Qi, material loss remains the dominant dissipation mechanism. Furthermore, we find that other lossy interfaces have a significantly smaller impact on the quality factor compared to the SA interface. These simulation results align with established experimental findings, providing a robust framework for refining resonator design. This work offers precise guidelines for TLS mitigation, essential for enhancing coherence times and developing more reliable superconducting quantum processors.
While significant strides have been made to increase the coherence time of superconducting qubits, further advancements are essential for realizing scalable quantum computing. Decoherence is often a result of loss and noise stemming from two-level systems and excess quasiparticles, arising due to material defects, fabrication processes, and ambient exposure, particularly at surfaces and interfaces. Our recent efforts to mitigate these decoherence mechanisms have employed a variety of strategies, including low-loss surface encapsulation materials, advanced substrate preparation techniques, modifications to metal film growth, and the development of novel fabrication processes. The structural and chemical properties of materials, surfaces, and interfaces are studied using scanning probe microscopy, electron microscopy, photoelectron spectroscopy, mass spectrometry, and X-ray diffraction, which is correlated to device performance metrics, including superconducting resonator internal quality factor and qubit T1 time. This information is used to identify and understand material sources of loss and their origins in the device fabrication process. Through multi-institution efforts within SQMS we have identified the loss mechanism of interstitial hydrogen in niobium-based devices and shown how standard fabrication processes introduce these hydrides, developing strategies to mitigate their formation.1 Furthermore, we have characterized the metal-substrate interface, including the loss of niobium-silicides formed at that interface, and developed silicon surface treatments that reduce atomic scale roughness and oxygen content at the metal-substrate and Josephson junction interfaces.2-4 By developing the connection between materials properties and the overall performance of superconducting quantum circuitry, we can develop fabrication strategies to mitigate material losses, thus supporting the ongoing efforts to enhance coherence time in superconducting quantum devices. 1. Torres-Castanedo, C. G.*, Goronzy, D. P.*, et al., Adv. Funct. Mater., 2401365 (2024) 2. Lu, X., et al., Phys. Rev. Materials 6, 064402 (2022) 3. Berti, G., Appl. Phys. Lett. 122, 192605 (2023) 4. Kopas, C. J., Goronzy, D. P., et al., arXiv:2408.02863 (2024)
Solid-state devices used for quantum computation and quantum sensing applications are adversely affected by loss and noise caused by spurious, charged two-level systems (TLS) and stray paramagnetic spins. These two sources of noise are interconnected, exacerbating the impact on circuit performance. We use an on-chip electron spin resonance (ESR) technique, with niobium nitride ( Nb N ) superconducting resonators, to study surface spins on silicon and the effect of postfabrication surface treatments. We identify two distinct spin species that are characterized by different spin-relaxation times and respond selectively to various surface treatments (annealing and hydrofluoric acid). Only one of the two spin species has a significant impact on the TLS-limited resonator quality factor at low-power (near-single-photon) excitation. We observe a three- to fivefold reduction in the total density of spins after surface treatments and demonstrate the efficacy of ESR spectroscopy in developing strategies to mitigate loss and decoherence in quantum systems. Published by the American Physical Society 2024
Superconducting qubits are a leading system for realizing large-scale quantum processors, but overall gate fidelities suffer from coherence times limited by microwave dielectric loss.Recently discovered tantalum-based qubits exhibit record lifetimes exceeding 0.3 ms.Here, we perform systematic, detailed measurements of superconducting tantalum resonators in order to disentangle sources of loss that limit state-of-the-art tantalum devices.By studying the dependence of loss on temperature, microwave photon number, and device geometry, we quantify materials-related losses and observe that the losses are dominated by several types of saturable two-level systems (TLSs), with evidence that both surface and bulk related TLSs contribute to loss.Moreover, we show that surface TLSs can be altered with chemical processing.With four different surface conditions, we quantitatively extract the linear absorption associated with different surface TLS sources.Finally, we quantify the impact of the chemical processing at singlephoton powers, the relevant conditions for qubit device performance.In this regime, we measure resonators with internal quality factors ranging from 5 to 15 × 10 6 , comparable to the best qubits reported.In these devices, the surface and bulk TLS contributions to loss are comparable, showing that systematic improvements in materials on both fronts are necessary to improve qubit coherence further.
Superconducting coplanar waveguide (CPW) microwave resonators in quantum circuits are the best components for reading and changing the state of artificial atoms because of their excellent coupling to quantum systems. This coupling forms the basis of the developing circuit quantum electrodynamic architecture. In quantum processors, oscillators are used to store and transmit quantum information using microwave-frequency wave packets. However, the presence of amorphous thin-film defects is deleterious and can result in an irrevocable loss of coherent information with uncontrolled degrees of freedom. Although there has been extensive research into techniques to reduce the coherent loss of such devices, the precise structure of amorphous dielectric layers on surfaces and interfaces and their associated loss mechanism are being actively studied. In particular, planar superconducting resonators are very sensitive to defects on their surfaces, such as two-level systems in oxidized metals and nonequilibrium quasiparticles, making these devices suitable probes for the different loss mechanisms. In this work, we present the design, fabrication, and characterization of Nb CPW resonators with different surface treatments with self-assembled monolayers (SAMs), which mitigate the growth of oxides in superconducting circuits. We demonstrate SAM-passivated resonators having internal quality factors of greater than 10 6 at a single-photon excitation power (measured at 100 mK), which were probed using scanning electron microscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy to demonstrate the efficiency of our surface treatment. Finally, we compared the improvements in the experimental quality factors to those obtained by numerical simulation.
While several experiments claim that two-level system (TLS) defects in amorphous surfaces and interfaces are responsible for energy relaxation in superconducting resonators and qubits, none can provide quantitative explanation of their data in terms of the conventional noninteracting TLS model. Here a model that interpolates between the interacting and noninteracting TLS loss tangent is proposed to perform numerical analysis of experimental data and extract information about TLS parameters and their distribution. As a proof of principle, the model is applied to TESLA cavities that contain only a single lossy material in their interior, the niobium-niobium oxide interface. The best fits show interacting TLSs with a sharp modulus of electric dipole moment for both thin (5nm) and thick (100nm) oxides, indicating that the TLSs are ``atomic'' instead of ``glassy.'' The proposed method can be applied to other devices with multiple material interfaces and substrates, with the goal of elucidating the nature of TLSs causing energy loss in resonators and qubits.