Abstract We propose an architecture of quantum-error-correction-based quantum repeaters that combines techniques used in discrete- and continuous-variable quantum information. Specifically, we propose to encode the transmitted qubits in a concatenated code consisting of two levels. On the first level we use a continuous-variable GKP code encoding the qubit in a single bosonic mode. On the second level we use a small discrete-variable code. Such an architecture has two important features. Firstly, errors on each of the two levels are corrected in repeaters of two different types. This enables for achieving performance needed in practical scenarios with a reduced cost with respect to an architecture for which all repeaters are the same. Secondly, the use of continuous-variable GKP code on the lower level generates additional analog information which enhances the error-correcting capabilities of the second-level code such that long-distance communication becomes possible with encodings consisting of only four or seven optical modes.
Abstract We propose an architecture of quantum-error-correction-based quantum repeaters that combines techniques used in discrete- and continuous-variable quantum information. Specifically, we propose to encode the transmitted qubits in a concatenated code consisting of two levels. On the first level we use a continuous-variable GKP code encoding the qubit in a single bosonic mode. On the second level we use a small discrete-variable code. Such an architecture has two important features. Firstly, errors on each of the two levels are corrected in repeaters of two different types. This enables for achieving performance needed in practical scenarios with a reduced cost with respect to an architecture for which all repeaters are the same. Secondly, the use of continuous-variable GKP code on the lower level generates additional analog information which enhances the error-correcting capabilities of the second-level code such that long-distance communication becomes possible with encodings consisting of only four or seven optical modes.
Quantum repeaters constitute a promising platform for enabling long-distance quantum communication and may ultimately serve as the backbone of a secure quantum internet, a scalable quantum network, or a distributed quantum computer. An efficient approach to encoding qubits within an error correcting code is provided by bosonic codes, in which even a single oscillator mode can function as a sufficiently large physical system. In this work, we initially investigate the bosonic Gottesman Kitaev Preskill (GKP) code as a promising platform for loss correcting quantum repeaters, compatible with room temperature implementation, and analyse how loss and other noise sources propagate through the circuit using Heisenberg evolution. We analyse three quantum repeater protocols in which transmission loss is suppressed at the cost of logical errors, identifying a relay-like teleamplifier as the optimal scheme. This enables long distance quantum communication via densely packed nodes without higher-level encoding, and we evaluate the resulting secure key rates exploiting analog syndrome information. Furthermore, we propose a concatenated Bell-state measurement (CBSM) scheme with a modified parity encoding based on GKP qubits, CV measurement with teleamplifier and a clipping method that corrects transmission loss without introducing logical errors. This significantly enhances the possible secure key distance. We find that GKP based repeaters can achieve performance comparable to approaches relying on photonic qubits, while requiring orders of magnitude fewer qubits. Our parity encoded GKP repeater protocol achieves a substantially higher secret key rate than existing GKP based repeater schemes while maintaining a comparable resource overhead.
The Gottesman-Kitaev-Preskill (GKP) code offers the possibility to encode higher-dimensional qudits into individual bosonic modes with, for instance, photonic excitations. Since photons enable the reliable transmission of quantum information over long distances and since GKP states subject to photon loss can be recovered to some extent, the GKP code has found recent applications in theoretical investigations of quantum communication protocols. While previous studies have primarily focused on GKP qubits, the possible practical benefits of higher-dimensional GKP qudits are hitherto widely unexplored. In this paper, we carry out performance analyses for three quantum repeater protocols based on GKP qudits including concatenations with a multi-qudit quantum polynomial code. We find that the potential data transmission gains for qudits are often hampered by their decreased GKP error-correcting capabilities. However, we also identify parameter regimes in which having access to an increased number of quantum levels per mode can enhance the theoretically achievable secret-key rate of the quantum repeater. Some of our protocols share the attractive feature that local processing and complete error syndrome identification are realizable without online squeezing. Provided a supply of suitable multi-mode GKP states is available, this can be realized with a minimal set of passive linear optical operations, even when the logical qudits are composed of many physical qudits.
Quantum communication between two distant parties will serve as a cornerstone of the future quantum internet. However, generating enough entangled Bell pairs over long distances is a critical bottleneck. Although photons are ideal carriers of quantum information, overcoming photon loss and the exponential attenuation of signals remains a major challenge. We propose an all-photonic quantum repeater architecture that enables quantum communication over 1,000 km with an equidistant repeater spacing of 9 km. This repeater spacing is enabled by elementary entangled Bell pairs protected through the concatenation of continuous-variable and discrete-variable quantum error correction codes, namely, the bosonic Gottesman-Kitaev-Preskill (GKP) code and the [[7,1,3]] Steane code, whose combination yields a synergistic improvement in robustness against photon loss. This architecture incorporates a new ranking criterion and a multi-reflection mirror-based optical cavity as a free-space photonic memory module, which we model in terms of its length and mirror-reflection efficiency. Additionally, we propose two heuristic construction methods for the elementary entangled Bell pairs. One method introduces up to two-qubit correlated errors within each logical qubit but requires a large number of GKP qubits, while the other allows up to three-qubit correlated errors within each logical qubit but requires fewer GKP qubits. To more accurately capture realistic physical conditions during photonic resource preparation, we include switching-induced imperfections in our simulations, in addition to other standard optical imperfections. In the presence of these imperfections, our realization requires only a few thousand GKP qubits per repeater station per protocol run, a resource requirement significantly smaller than the corresponding resource requirements of prior third-generation all-photonic repeater proposals.
Quantum repeaters are a promising platform for realizing long-distance quantum communication and thus could form the backbone of a secure quantum internet, a scalable quantum network, or a distributed quantum computer. Repeater protocols that encode information in single- or multiphoton states are limited by transmission losses and the cost of implementing entangling gates or Bell measurements. In this work, we consider implementing a quantum repeater protocol using Gottesman-Kitaev-Preskill (GKP) qubits. These qubits are natural elements for quantum repeater protocols, because they allow for deterministic Gaussian entangling operations and Bell measurements, which can be implemented at room temperature. The GKP encoding is also capable of correcting small displacement errors. At the cost of additional Gaussian noise, photon loss can be converted into a random displacement error channel by applying a phase-insensitive amplifier. Here we show that a similar conversion can be achieved in two-way repeater protocols by using phase-sensitive amplification applied in the postprocessing of the measurement data, resulting in less overall Gaussian noise per (sufficiently short) repeater segment. We also investigate concatenating the GKP code with higher-level qubit codes while leveraging analog syndrome data, postselection, and path-selection techniques to boost the rate of communication. We compute the secure key rates and find that GKP repeaters can achieve a comparative performance relative to methods based on photonic qubits while using orders-of-magnitude fewer qubits.
Quantum communication enables various technological possibilities that are hard or impossible with classical communication. These include secure distribution of keys, transfer of quantum information and distributed quantum computation and sensing. Quantum communication relies on the ability to transmit a quantum state over some distance. Exponential photon loss from fibre inevitably limits the distance one would be able to achieve this over and therefore make use of these promising new technologies.Quantum repeaters have been proposed as a solution to this problem. Elementary repeater protocols involve dividing the channel into smaller segments with repeater nodes, distributing entanglement between these nodes and then performing swapping operations to connect entangled pairs and purification to correct operation errors. In the years since these elementary protocols, quantum repeaters have been through extensive theoretical improvements including utilising the benefits of quantum error correction to improve efficiency.However, the vast majority of these protocols are for discrete encodings of quantum information. There is significant interest in using continuous variable encodings of quantum information for quantum communication applications. This is motivated in part by the ease of generating, manipulating and detecting quantum states and additionally the increased compatibility with existing infrastructure. In this thesis we present one of the first quantum repeater protocols for continuous variable encodings of quantum information.The continuous variable quantum repeater we present in this thesis is based on concatenated error correction protocols that work to correct loss on any optical field state. We thoroughly investigate operation of this error correction protocol including the trade-offs associated with real implementations, various modifications to the error correction protocol as well as whether it can be implemented with current technology.We illustrate how these error correction protocols may be structured to form a quantum repeater that inhibits the exponential photon loss problem with a resource cost that scales polynomially with distance. We show that our continuous variable repeater is able to beat the fundamental bound on quantum communication without a repeater. Finally, we compare the performance of our first generation continuous variable repeater to existing first generation discrete variable protocols.
Entanglement-assisted (EA) stabilizer codes enhance the rate of error correction in relation to codes with no pre-shared entanglement. Meanwhile, bosonic error-correcting codes, such as the Gottesman-Kitaev-Preskill (GKP) code, can be concatenated with qubit stabilizer codes to significantly reduce the logical failure probability of those stabilizer codes. First, we combine the above two concepts to propose an EA version of the qubit-into-oscillators concatenated code that chains an EA-stabilizer (outer) code with a GKP (inner) code. As an example we present a three-qubit EA-repetition concatenated with a GKP code. Second, we propose an EA version of the non-Gaussian oscillator-into-oscillators concatenated code that chains a GKP (outer) code with an EA-stabilizer (inner) code. As an example we present a GKP code concatenated with a three-qubit EA repetition code that uses two maximally entangled modes (emodes) and suppresses the variances of both position and momentum quadrature errors of a data mode. Furthermore, we generalize the latter example to a family of GKP code concatenated with a n-qubit EA repetition code that uses n−1 emodes and suppresses the variances of both position and momentum quadrature errors of a data mode by a factor 1/n.