We quantify the disturbance of a quantum state undergoing a sequence of observations and particularly focus on a weak measurement followed by postselection and compare these results to the projective counterpart. Taking into account the distinguishability of both the system and the device, we obtain the exact trade-off between the system state disturbance and the change in the device pointer state. We show that for particular postselection procedures the coupling strength between the system and the device can be significantly reduced without losing measurement sensitivity, which is directly transferred to a reduced state disturbance of the system. We observe that a weak measurement alone does not provide this advantage, and only in combination with postselection is a significant improvement in terms of increased measurement sensitivity and reduced state disturbance found. We further show that under realistic experimental conditions this state disturbance is small, whereas the exact postselection probability is considerably larger than the approximate value given by the overlap of the initial and final states when neglecting the system state disturbance.
We quantify the disturbance of a quantum state undergoing a sequence of observations and particularly focus on a weak measurement followed by postselection and compare these results to the projective counterpart. Taking into account the distinguishability of both the system and the device, we obtain the exact trade-off between the system state disturbance and the change in the device pointer state. We show that for particular postselection procedures the coupling strength between the system and the device can be significantly reduced without losing measurement sensitivity, which is directly transferred to a reduced state disturbance of the system. We observe that a weak measurement alone does not provide this advantage, and only in combination with postselection is a significant improvement in terms of increased measurement sensitivity and reduced state disturbance found. We further show that under realistic experimental conditions this state disturbance is small, whereas the exact postselection probability is considerably larger than the approximate value given by the overlap of the initial and final states when neglecting the system state disturbance.
We study quantum measurement with preselection and postselection, and derive the precise expressions of the measurement results without any restriction on the coupling strength between the system and the measuring device. For a qubit system, we derive the maximum pointer shifts by choosing appropriate initial and finial states. A significant amplification effect is obtained when the interaction between the system and the measuring device is very weak, and typical ideal quantum measurement results are obtained when the interaction is strong. The improvement of the signal-to-noise ratio (SNR) and the enhancement of the measurement sensitivity (MS) by weak measurements are studied. Without considering the probability decrease due to postselection, the SNR and the MS can be both significantly improved by weak measurements; however, neither SNR nor MS can be effectively improved when the probability decrease is considered.
We study quantum measurements with preselection and postselection, and derive the precise expressions of the measurement results without any restriction on the coupling strength. For a qubit system, we derive the maximum measurement results by choosing appropriate initial and finial states. Significant amplification effect is obtained when the interaction between the system and the measuring device is very weak; and typical ideal quantum measurement results are obtained when the interaction is strong. The improvement of the signal-to-noise ratio (SNR) and the enhancement of the measure sensitivity (MS) by weak measurements are studied. Without considering the probability decrease due to postselection, the SNR and the MS can both be significantly improved by weak measurements; surprisingly, neither SNR nor MS can be effectively improved when the probability decrease is considered.
While the novel applications of weak values have recently attracted wide attention, weak measurement, the usual way to extract weak values, suffers from risky approximations and severe quantum noises. In this paper, we show that the weak-value information can be obtained exactly in strong measurement with postselections, via measuring the coupling-deformed pointer observables, i.e., the observables selected according to the coupling strength. With this approach, we keep all the advantages claimed by weak-measurement schemes and at the same time solve some widely criticized problems thereof, such as the questionable universality, systematical bias, and drastic inefficiency.
A measurement consists in coupling a system to a probe and reading the output of the probe to gather information about the system. The weaker the coupling, the smaller the back-action on the system, but also the less information conveyed. If the system undergoes a second measurement, the statistics of the first output can be conditioned on the value of the second one. This procedure is known as postselection. A postselected weak measurement of an observable can give a large average output of the probe when the postselected state is nearly orthogonal to the initial state of the system. This large value is an interference effect in the readout of the probe, which is initially in a coherent superposition of readout states (also known as pointer states). Usually, the weak interaction between system and probe is considered instantaneous, so that the dynamics of the probe can be neglected. However, for a weak measurement in solid-state devices, an interaction of finite duration is likely needed. Here, we show how this finite duration generates a contribution of the dynamical phase to the readout statistics. Furthermore, we derive interpolation formulas that are able to describe the statistics of the weak measurement for the whole range of pre- and postselected states. Phase-space averages appear in the expansion, suggesting an interpretation in terms of non-positive probabilities. Decoherence in the probe is also accounted for and it is pointed out the existence of a regime of intermediate coupling strength in which coherent oscillations can be observed in the probability of the readout.
In the weak measurement (WM) scenario involving weak interaction and postselection by projective measurement, the empirical significance of weak values is manifested in terms of shifts in the measurement pointer's mean position and mean momentum. In this context, a general quantitative treatment is presented in this paper by taking into account the hitherto unexplored effect of correlations among the pointer degrees of freedom which pertain to an arbitrary multidimensional preselected pointer state. This leads to an extension of the earlier results, showing that, for complex weak values, the correlations among different pointer degrees of freedom can crucially affect the way the imaginary parts of the weak values are related to the observed shifts of the mean pointer position and momentum. The particular relevance of this analysis is discussed in the case of sequential weak interactions followed by a projective measurement enabling postselection (called sequential WM) which, in the special case, reduces to the usual WM scheme (involving a single weak interaction and postseletion) modified by the effect of pointer-state correlations.
We investigate, within the weak measurement theory, the advantages of nonclassical pointer states over semiclassical ones for coherent, squeezed vacuum, and Schr\"odinger cat states. These states are utilized as pointer states for the system operator $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{A}$ with property ${\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{A}}^{2}=\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{I}$, where $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{I}$ represents the identity operator. We calculate the ratio between the signal-to-noise ratio of nonpostselected and postselected weak measurements. The latter is used to find the quantum Fisher information for the above pointer states. The average shifts for those pointer states with arbitrary interaction strength are investigated in detail. One key result is that we find the postselected weak measurement scheme for nonclassical pointer states to be superior to semiclassical ones. This can improve the precision of the measurement process.