Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2009.07301 · Quantum

Gate Set Tomography

Erik Nielsen, John King Gamble, Kenneth Rudinger, Travis L. Scholten, Kevin Young, Robin Blume-Kohout

Published Oct 5, 2021• 211 citations
arXivHTMLPDF

Abstract

Gate set tomography (GST) is a protocol for detailed, predictive characterization of logic operations (gates) on quantum computing processors. Early versions of GST emerged around 2012-13, and since then it has been refined, demonstrated, and used in a large number of experiments. This paper presents the foundations of GST in comprehensive detail. The most important feature of GST, compared to older state and process tomography protocols, is that it is calibration-free . GST does not rely on pre-calibrated state preparations and measurements. Instead, it characterizes all the operations in a gate set simultaneously and self-consistently, relative to each other. Long sequence GST can estimate gates with very high precision and efficiency, achieving Heisenberg scaling in regimes of practical interest. In this paper, we cover GST's intellectual history, the techniques and experiments used to achieve its intended purpose, data analysis, gauge freedom and fixing, error bars, and the interpretation of gauge-fixed estimates of gate sets. Our focus is fundamental mathematical aspects of GST, rather than implementation details, but we touch on some of the foundational algorithmic tricks used in the pyGSTi implementation.

DOI
10.22331/q-2021-10-05-557

Related papers

Introduction to Quantum Gate Set Tomography

Greenbaum, Daniel

Quantum gate set tomography (GST) has emerged as a promising method for the full characterization of quantum logic gates. In contrast to quantum process tomography (QPT), GST self-consistently and correctly accounts for state preparation and measurement (SPAM) errors. It therefore provides significantly more accurate estimates than QPT as gate fidelities increase into the fault-tolerant regime. We give a detailed review of GST and provide a self-contained guide to its implementation. The method is presented in a step-by-step fashion and relevant mathematical background material is included. Our goal is to demonstrate the utility of GST as both an accurate characterization technique and a simple and effective diagnostic tool. As an illustration, we compare the output of GST and QPT using simulated example data for a single qubit. In agreement with the original literature, we find that coherent errors are poorly estimated by QPT near quantum error correction thresholds, while GST is accurate in this regime.

arXiv:1509.02921•Sep 9, 2015•81 citations

Python GST Implementation v. 0.9 beta

Erik Nielsen, Robin Blume-Kohout, Kenneth Rudinger +1 more

PyGSTi is an implementation of Gate Set Tomography in the python programming language. Gate Set Tomography (GST) is a theory and protocol for simultaneously estimating the state preparation, gate operations, and measurement effects of a physical system of one or many quantum bits (qubits). These estimates are based entirely on the statistics of experimental measurements, and their interpretation and analysis can provide a detailed understanding of the types of errors/imperfections in the physical system. In this way, GST provides not only a means of certifying the "goodness" of qubits but also a means of debugging (i.e. improving) them.

•Sep 1, 2016•0 citations

Python GST Implementation (PyGSTi) v. 0.9

Nielsen, Erik, Robin Blume-Kohout, Kenneth Rudinger +11 more

PyGSTi is a Python package for modeling and characterizing noise (errors) in small quantum information processors. In addition to being a basic framework for describing quantum circuits and noise models, it implements mainstream quantum characterization, verification, and validation (QCVV) protocols such as Gate Set Tomography (GST), Randomized Benchmarking (RB), Robust Phase Estimation, and Idle Tomography. It also implements prototype protocols used for timeseries analysis and crosstalk detection, all of which have the goal of better understanding the noise found in existing as-built experimental devices. The central protocol of pyGSTi (from where it derives its name) is Gate Set Tomography. GST is a theory and protocol for simultaneously estimating the state preparation, gate operations, and measurement effects of a physical system of one or many quantum bits (qubits). These estimates are based entirely on the statistics of experimental measurements, and their interpretation and analysis can provide a detailed understanding of the types of errors/imperfections in the physical system. In this way, GST provides not only a means of certifying the “goodness” of qubits but also a means of debugging (i.e. improving) them. The other protocols follow this similar pattern in that they use statistical inference and analysis of experimental data to estimate one or more properties of the noise in a device.

•Jan 1, 2019•1 citation

Efficient Characterization of Qudit Logical Gates with Gate Set Tomography Using an Error-Free Virtual Z Gate Model

Shuxiang Cao, Deep Lall, Mustafa S. Bakr +7 more

Gate set tomography (GST) characterizes the process matrix of quantum logic gates, along with measurement and state preparation errors in quantum processors. GST typically requires extensive data collection and significant computational resources for model estimation. We propose a more efficient GST approach for qudits, utilizing the qudit Hadamard and virtual Z gates to construct fiducials while assuming virtual Z gates are error-free. Our method reduces the computational costs of estimating characterization results, making GST more practical at scale. We experimentally demonstrate the applicability of this approach on a superconducting transmon qutrit.

arXiv:2210.04857•Physical Review Letters•Sep 17, 2024•11 citations

Logical gate set tomography

Piper C. Wysocki, Juan Gonzalez De Mendoza, Karl Mayer +11 more

Quantum error correction (QEC) can strongly suppress noise, but predicting whether a computation succeeds requires understanding not only how much effective noise persists after QEC, but what form that noise takes. To thoroughly characterize this noise, we introduce logical gate set tomography (``logical GST''). Logical GST produces detailed representations of noisy logical operations that can be used to derive higher-level metrics, such as gate fidelity and diamond distance, and to test for non-Markovian and coherent logical errors. We use logical GST to obtain the first full, self-consistent characterization of a universal single-qubit logical gate set, implemented in the seven-qubit Steane code using Quantinuum System Model H1, a 20-qubit trapped-ion quantum processor. In the experimental data from H1, logical GST identified predominantly logical Pauli-stochastic errors, found no evidence of logical non-Markovianity, and detected weak potential signatures of coherent logical error. By contrast, higher-shot datasets generated with Quantinuum's detailed system emulator, identify mechanisms for weak but statistically significant logical non-Markovianity and strong evidence of coherent logical error. Finally, we use logical GST to perform error attribution with the system emulator, revealing how specific physical error sources shape logical error mechanisms.

quant-pharXiv:2610.19034•Oct 15, 2026•0 citations

Near-Minimal Gate Set Tomography Experiment Designs

Corey Ostrove, Kenneth Rudinger, Stefan Seritan +2 more

Gate set tomography (GST) is a technique for self-consistently and precisely estimating the entire gate set of a quantum processor. GST carries nontrivial experimental cost, and as such the use of GST in practice has so far been limited to characterizing subsets of systems of at most two qubits at anyone time. In this work we present a new protocol for streamlining GST experiment designs by stripping away nearly all of the redundancy present in a traditional GST experiment. We do so by determining how GST base circuits (called “germs”) are sensitive to variations in particular gate set parameters, and leverage this information to identify and subsequently strip out redundancy across a germ set as a whole. We present the application of this new protocol to GST experiment designs for two-qubit systems and show that we can reliably produce experiment designs approaching information theoretic lower bounds in size. We demonstrate in both simulation and in a theoretical analysis based on the Fisher information that these streamlined experiment designs nonetheless maintain the Heisenberg-like precision scaling properties of traditional GST. Moreover, we show that in practice it is possible using this technique to achieve a final precision in our estimates comparable to those of much larger experiment designs using many times fewer circuits overall. We also discuss the impacts of this technique for the prospects of scaling up the practical use of GST for three-qubit systems.

arXiv:2308.08781•IEEE International Conference on Quantum Computing and Engineering (QCE)•Sep 17, 2023•3 citations
Gate set tomography (GST) is a protocol for detailed, predictive characterization of logic operations (gates) on quantum computing processors. Early versions of GST emerged around 2012-13, and since then it has been refined, demonstrated, and used in a large number of experiments. This paper presents the foundations of GST in comprehensive detail. The most important feature of GST, compared to older state and process tomography protocols, is that it is calibration-free . GST does not rely on pre-calibrated state preparations and measurements. Instead, it characterizes all the operations in a gate set simultaneously and self-consistently, relative to each other. Long sequence GST can estimate gates with very high precision and efficiency, achieving Heisenberg scaling in regimes of practical interest. In this paper, we cover GST's intellectual history, the techniques and experiments used to achieve its intended purpose, data analysis, gauge freedom and fixing, error bars, and the interpretation of gauge-fixed estimates of gate sets. Our focus is fundamental mathematical aspects of GST, rather than implementation details, but we touch on some of the foundational algorithmic tricks used in the pyGSTi implementation.
Quantum gate set tomography (GST) has emerged as a promising method for the full characterization of quantum logic gates. In contrast to quantum process tomography (QPT), GST self-consistently and correctly accounts for state preparation and measurement (SPAM) errors. It therefore provides significantly more accurate estimates than QPT as gate fidelities increase into the fault-tolerant regime. We give a detailed review of GST and provide a self-contained guide to its implementation. The method is presented in a step-by-step fashion and relevant mathematical background material is included. Our goal is to demonstrate the utility of GST as both an accurate characterization technique and a simple and effective diagnostic tool. As an illustration, we compare the output of GST and QPT using simulated example data for a single qubit. In agreement with the original literature, we find that coherent errors are poorly estimated by QPT near quantum error correction thresholds, while GST is accurate in this regime.
PyGSTi is an implementation of Gate Set Tomography in the python programming language. Gate Set Tomography (GST) is a theory and protocol for simultaneously estimating the state preparation, gate operations, and measurement effects of a physical system of one or many quantum bits (qubits). These estimates are based entirely on the statistics of experimental measurements, and their interpretation and analysis can provide a detailed understanding of the types of errors/imperfections in the physical system. In this way, GST provides not only a means of certifying the "goodness" of qubits but also a means of debugging (i.e. improving) them.
PyGSTi is a Python package for modeling and characterizing noise (errors) in small quantum information processors. In addition to being a basic framework for describing quantum circuits and noise models, it implements mainstream quantum characterization, verification, and validation (QCVV) protocols such as Gate Set Tomography (GST), Randomized Benchmarking (RB), Robust Phase Estimation, and Idle Tomography. It also implements prototype protocols used for timeseries analysis and crosstalk detection, all of which have the goal of better understanding the noise found in existing as-built experimental devices. The central protocol of pyGSTi (from where it derives its name) is Gate Set Tomography. GST is a theory and protocol for simultaneously estimating the state preparation, gate operations, and measurement effects of a physical system of one or many quantum bits (qubits). These estimates are based entirely on the statistics of experimental measurements, and their interpretation and analysis can provide a detailed understanding of the types of errors/imperfections in the physical system. In this way, GST provides not only a means of certifying the “goodness” of qubits but also a means of debugging (i.e. improving) them. The other protocols follow this similar pattern in that they use statistical inference and analysis of experimental data to estimate one or more properties of the noise in a device.
Gate set tomography (GST) characterizes the process matrix of quantum logic gates, along with measurement and state preparation errors in quantum processors. GST typically requires extensive data collection and significant computational resources for model estimation. We propose a more efficient GST approach for qudits, utilizing the qudit Hadamard and virtual Z gates to construct fiducials while assuming virtual Z gates are error-free. Our method reduces the computational costs of estimating characterization results, making GST more practical at scale. We experimentally demonstrate the applicability of this approach on a superconducting transmon qutrit.
Quantum error correction (QEC) can strongly suppress noise, but predicting whether a computation succeeds requires understanding not only how much effective noise persists after QEC, but what form that noise takes. To thoroughly characterize this noise, we introduce logical gate set tomography (``logical GST''). Logical GST produces detailed representations of noisy logical operations that can be used to derive higher-level metrics, such as gate fidelity and diamond distance, and to test for non-Markovian and coherent logical errors. We use logical GST to obtain the first full, self-consistent characterization of a universal single-qubit logical gate set, implemented in the seven-qubit Steane code using Quantinuum System Model H1, a 20-qubit trapped-ion quantum processor. In the experimental data from H1, logical GST identified predominantly logical Pauli-stochastic errors, found no evidence of logical non-Markovianity, and detected weak potential signatures of coherent logical error. By contrast, higher-shot datasets generated with Quantinuum's detailed system emulator, identify mechanisms for weak but statistically significant logical non-Markovianity and strong evidence of coherent logical error. Finally, we use logical GST to perform error attribution with the system emulator, revealing how specific physical error sources shape logical error mechanisms.
Gate set tomography (GST) is a technique for self-consistently and precisely estimating the entire gate set of a quantum processor. GST carries nontrivial experimental cost, and as such the use of GST in practice has so far been limited to characterizing subsets of systems of at most two qubits at anyone time. In this work we present a new protocol for streamlining GST experiment designs by stripping away nearly all of the redundancy present in a traditional GST experiment. We do so by determining how GST base circuits (called “germs”) are sensitive to variations in particular gate set parameters, and leverage this information to identify and subsequently strip out redundancy across a germ set as a whole. We present the application of this new protocol to GST experiment designs for two-qubit systems and show that we can reliably produce experiment designs approaching information theoretic lower bounds in size. We demonstrate in both simulation and in a theoretical analysis based on the Fisher information that these streamlined experiment designs nonetheless maintain the Heisenberg-like precision scaling properties of traditional GST. Moreover, we show that in practice it is possible using this technique to achieve a final precision in our estimates comparable to those of much larger experiment designs using many times fewer circuits overall. We also discuss the impacts of this technique for the prospects of scaling up the practical use of GST for three-qubit systems.