A hybrid system of a semiconductor quantum dot single photon source and a rubidium quantum memory represents a promising architecture for future photonic quantum repeaters. One of the key challenges lies in matching the emission frequency of quantum dots with the transition frequency of rubidium atoms while preserving the relevant emission properties. Here, we demonstrate the bidirectional frequency tuning of the emission from a narrow-linewidth (close-to-transform-limited) quantum dot. The frequency tuning is based on a piezoelectric strain-amplification device, which can apply significant stress to thick bulk samples. The induced strain shifts the emission frequency of the quantum dot over a total range of 1.15 THz, about three orders of magnitude larger than its linewidth. Throughout the whole tuning process, both the spectral properties of the quantum dot and its single-photon emission characteristics are preserved. Our results show that external stress can be used as a promising tool for reversible frequency tuning of high-quality quantum dots and pave the wave toward the realization of a quantum dot–rubidium atom interface for quantum networking.
A hybrid system of a semiconductor quantum dot single photon source and a rubidium quantum memory represents a promising architecture for future photonic quantum repeaters. One of the key challenges lies in matching the emission frequency of quantum dots with the transition frequency of rubidium atoms while preserving the relevant emission properties. Here, we demonstrate the bidirectional frequency tuning of the emission from a narrow-linewidth (close-to-transform-limited) quantum dot. The frequency tuning is based on a piezoelectric strain-amplification device, which can apply significant stress to thick bulk samples. The induced strain shifts the emission frequency of the quantum dot over a total range of 1.15 THz, about three orders of magnitude larger than its linewidth. Throughout the whole tuning process, both the spectral properties of the quantum dot and its single-photon emission characteristics are preserved. Our results show that external stress can be used as a promising tool for reversible frequency tuning of high-quality quantum dots and pave the wave toward the realization of a quantum dot–rubidium atom interface for quantum networking.
Reversible biaxial strains are used for tuning the emission wavelengths of high quality GaAs/AlGaAs quantum dots (QDs) in the spectral range of the 87Rb D2 lines. The strain is transferred by integrating free standing (Al)GaAs nanomembranes, containing QDs, onto piezoelectric actuators. Narrow excitonic emission lines as sharp as 25 μeV are shown, and a tuning range larger than 5 nm is demonstrated. This range corresponds to an induced anisotropic biaxial strain of the order of 0.15%, as evaluated from the shift in the emission of the GaAs from the nanomembranes. The presented on-chip technology is potentially interesting for future quantum memories based on hybrid semiconductor-atomic interfaces.
Quantum dots embedded in semiconductor photonic nanowires (NW-QDs) can deterministically produce single-photons and entangled photon pairs at high repetition rates. These photons can be efficiently coupled from the photonic nanowire into free space or optical fibers thanks to the sharp tip of the nanowire, which provides impedance matching. However, precise control of the NW-QD emission frequency in a way that is reversible, does not degrade the properties of the emitted photons, and can be used independently for individual NW-QDs on the same chip has so far remained a challenge. Resolving this issue is crucial for applications when interfacing the photons with quantum systems that require MHz to sub-GHz precision, such as atomic ensembles acting as memories in a quantum network. Here, we demonstrate a reversible tuning method that can tune the emission frequency of a NW-QD by more than 300 GHz with sub-GHz precision. We achieve this through gas condensation that is then partially reversed with localized laser ablation. This process finely adjusts stress applied to the quantum dots, thereby tuning their emission frequency. We validate the precision and stability of this method by tuning the frequency of the emitted single-photons across an atomic resonance to probe its absorption and dispersion. We observed up to 80\% absorption of the single-photons from NW-QD in hot caesium vapour at the D1-line resonances and a 75-fold decrease in group velocity associated with the hyperfine transitions of the D1-line ground states. We observed no discernible effects in the second-order autocorrelation function, lifetime, or linewidth of the NW-QD emission for up to 300 GHz of tuning and we saw minimal effects on the fine structure splitting of the NW-QD when tuning up to 100 GHz.
High Resolution Image Download MS PowerPoint Slide Quantum dots embedded in semiconductor photonic nanowires (NW-QDs) can deterministically produce single-photons and entangled photon pairs at high repetition rates. These photons can be efficiently coupled from the photonic nanowire into free space or optical fibers thanks to the sharp tip of the nanowire, which provides impedance matching. However, precise control of the NW-QD emission frequency in a way that is reversible, does not degrade the properties of the emitted photons, and can be used independently for individual NW-QDs on the same chip has so far remained a challenge. Resolving this issue is crucial for applications when interfacing the photons with quantum systems that require MHz to sub-GHz precision, such as atomic ensembles acting as memories in a quantum network. Here, we demonstrate a reversible tuning method that can tune the emission frequency of a NW-QD by more than 300 GHz with sub-GHz precision. We achieve this through gas condensation that is then partially reversed with localized laser ablation. This process finely adjusts stress applied to the quantum dots, thereby tuning their emission frequency. We validate the precision and stability of this method by tuning the frequency of the emitted single-photons across an atomic resonance to probe its absorption and dispersion. We observed up to 80% absorption of the single-photons from NW-QD in hot cesium vapor at the D 1 -line resonances and a 75-fold decrease in group velocity associated with the hyperfine transitions of the D 1 -line ground states. We observed no discernible effects in the second-order autocorrelation function, lifetime, or linewidth of the NW-QD emission for up to 300 GHz of tuning and we saw minimal effects on the fine structure splitting of the NW-QD when tuning up to 100 GHz.
Abstract Semiconductor quantum dots are leading candidates for the on-demand generation of single photons and entangled photon pairs. High photon quality and indistinguishability of photons from different sources are critical for quantum information applications. The inability to grow perfectly identical quantum dots with ideal optical properties necessitates the application of post-growth tuning techniques via e.g. temperature, electric, magnetic or strain fields. In this review, we summarize the state-of-the-art and highlight the advantages of strain tunable non-classical photon sources based on epitaxial quantum dots. Using piezoelectric crystals like PMN-PT, the wavelength of single photons and entangled photon pairs emitted by InGaAs/GaAs quantum dots can be tuned reversibly. Combining with quantum light-emitting diodes simultaneously allows for electrical triggering and the tuning of wavelength or exciton fine structure. Emission from light hole exciton can be tuned, and quantum dot containing nanostructure such as nanowires have been piezo-integrated. To ensure the indistinguishability of photons from distant emitters, the wavelength drift caused by piezo creep can be compensated by frequency feedback, which is verified by two-photon interference with photons from two stabilized sources. Therefore, strain tuning proves to be a flexible and reliable tool for the development of scalable quantum dots-based non-classical photon sources.
Abstract Hybrid quantum technologies aim to combine diverse quantum systems, mirroring classical computers' integration of electronic, photonic, magnetic, and mechanical components. Quantum dots in semiconductor nanowires emit high-purity, deterministic single photons with high repetition, while atomic ensembles offer photon storage and strong optical nonlinearities controllable by single photons. To interface quantum dots with atomic ensembles successfully, precise optical frequency matching of these two platforms is crucial. We demonstrate a simple, precise, reversible, broad-range, and local method for controlling the emission frequency of individual quantum dots embedded in tapered semiconductor nanowires. We then interface the quantum dots with an atomic ensemble via single-photons matched to hyperfine transitions and slow-light regions of the cesium D1-line. Our approach allows linking atomic and solid-state quantum systems and can potentially also be applied to other types of nanowire-embedded solid-state emitters, as well as for creating devices based on multiple solid-state emitters tuned to produce indistinguishable photons.
Abstract Hybrid quantum interfaces that combine the fast, deterministic single-photon emission of semiconductor quantum dots (QDs) with the long-lived quantum memories of atomic vapors represent a promising route towards scalable quantum networks and distributed quantum computing. However, the realization of such interfaces is fundamentally limited by the stringent spectral matching required between the narrow optical transitions of atomic systems and the intrinsically variable emission of QDs. Moreover, achieving bright QD emission requires integration into an efficient light-collecting structure. In this work, we present a systematic investigation of three tuning mechanisms for cavity-enhanced QDs embedded in micropillar cavities: thermal tuning, in situ laser processing, and nitrogen gas deposition. We experimentally evaluated the applicability of each method and characterized their tuning ranges and precisions. All three methods enable reliable and precise wavelength shifts, even for QDs in larger micropillars. These results provide practical strategies for achieving spectral resonance between QD emitters and atomic vapor lines, paving the way for tunable solid-state-atomic hybrid platforms for photon storage, synchronization, and interfacing in hybrid quantum systems.