Spatial modes of light provide a high-dimensional space that can be used to encode both classical and quantum information. Current approaches for dynamically generating and measuring these modes are slow, due to the need to reconfigure a high-resolution phase mask such as a spatial light modulator or digital micromirror device. The process of updating the spatial mode of light can be greatly accelerated by multiplexing a set of static phase masks with a fast, image-preserving optical switch, such as an acousto-optic modulator (AOM). We experimentally realize this approach, using a double-pass AOM to generate one of five orbital angular momentum states with a switching rate of up to 500 kHz. We then apply this system to perform fast quantum state tomography of spatial modes of light in a 2-dimensional Hilbert space by projecting the unknown state onto six spatial modes comprising three mutually unbiased bases. We are able to reconstruct arbitrary states in under 1 ms with an average fidelity of 96.9%.
Spatial modes of light provide a high-dimensional space that can be used to encode both classical and quantum information. Current approaches for dynamically generating and measuring these modes are slow, due to the need to reconfigure a high-resolution phase mask such as a spatial light modulator or digital micromirror device. The process of updating the spatial mode of light can be greatly accelerated by multiplexing a set of static phase masks with a fast, image-preserving optical switch, such as an acousto-optic modulator (AOM). We experimentally realize this approach, using a double-pass AOM to generate one of five orbital angular momentum states with a switching rate of up to 500 kHz. We then apply this system to perform fast quantum state tomography of spatial modes of light in a 2-dimensional Hilbert space by projecting the unknown state onto six spatial modes comprising three mutually unbiased bases. We are able to reconstruct arbitrary states in under 1 ms with an average fidelity of 96.9%.
We report a technique for encoding both amplitude and phase variations onto a laser beam using a single digital micro-mirror device (DMD). Using this technique, we generate Laguerre-Gaussian and vortex orbital-angular-momentum (OAM) modes, along with modes in a set that is mutually unbiased with respect to the OAM basis. Additionally, we have demonstrated rapid switching among the generated modes at a speed of 4 kHz, which is much faster than the speed regularly achieved by phase-only spatial light modulators (SLMs). The dynamic control of both phase and amplitude of a laser beam is an enabling technology for classical communication and quantum key distribution (QKD) systems that employ spatial mode encoding.
Rapid and programmable shaping of light fields is central to modern microscopy, display technologies, optical communications and sensing, quantum engineering, and quantum information processing. Current wavefront shaping technologies face a fundamental dichotomy: liquid-crystal-on-silicon spatial light modulators (LCoS-SLMs) offer high pixel count but suffer from low refresh rates, while acousto-optic deflectors (AODs) provide moderate speed with restricted optical beam geometries. Though recent advances in photonic integrated circuits achieve fast switching, there is currently no tool that provides MHz-rate, continuous motion, and arbitrarily reconfigurable control over a set of diffraction-limited spots. Here we introduce a new class of spatial light modulator that provides both 2D pixel geometry and high speed. The device operates by encoding spatial information in frequency bins via a broadband optical phase modulator, and decoding them via a first-of-its-kind, high-resolution 2D spectrometer. The spectrometer, based on the architecture which we call the Re-Imaging Phased Array (RIPA), achieves its sensitivity through long path-lengths, enabled by intra-spectrometer re-imaging lens-guides. We demonstrate site-resolved optical pulsing with a 44(1)~ns rise time, corresponding to frame rates exceeding 10 million frames per second, as well as arbitrary, reconfigurable 2D addressing and multi-site operations, including asynchronous, independent beam motion, splitting, and recombination. Leveraging these tools opens new horizons in rapid optical manipulation of matter across science, from fast, scalable control that approaches the inertial and radiation limits of atoms in quantum processors, to dynamically programmable, microsecond-resolved illumination in microscopy and neuro-biological imaging.
Light carrying orbital angular momentum (OAM) has many applications ranging from optical manipulation, imaging and remote sensing, and optical communications, and can be used to perform fundamental studies in quantum mechanics and quantum information. Moreover, single photons with high-order OAM allow for increasing the amount of information carried per photon in quantum communication. This thesis describes the study of methods for the preparation and detection of OAM of light in high mode order by utilizing beam shaping techniques using spatial light modulators (SLMs). The quality of the generated high-order OAM mode is limited by optical aberrations which are induced by optical elements in realistic systems and propagation through realistic channels. In order to create and characterize the OAM modes with high quality, we investigate methods for aberration detection and correction using SLMs. These beam shaping techniques for the correction of optical aberrations allow us to generate and detect light carrying OAM with mode order ranging from l = 0 to l = 8 with good quality, and to generate high-quality superpositions of OAM modes with high mode order or in high dimensions. Furthermore, we observe low crosstalk and good levels of mode discrimination between different OAM modes of light. Our experimental setup can be applied in future studies to investigate and test different protocols in quantum information with high dimensional systems, such as high dimensional quantum state tomography.
Complex images, inscribed into the spatial profile of a laser beam or even a single photon, offer a highly efficient method of data encoding. Here we present a prototype system which can quickly modulate between arbitrary images. We display an array of holograms, each defined by its phase and intensity profile, on a spatial light modulator. The input beam is then steered by an acousto-optic modulator to one of these holograms, where it is converted into the desired light mode. We demonstrate switching between characters within three separate alphabets at a switching rate of up to10 kHz. This rate is limited by our detection system, and we anticipate that the system is capable of far higher rates. Furthermore our system is not limited in efficiency by channel number, making it ideal for quantum communication applications.
The orbital angular momentum (OAM) of light is an infinite-dimensional degree of freedom of light with several applications in both classical and quantum optics. However, to fully take advantage of the potential of OAM states, reliable detection platforms to characterize generated states in experimental conditions are needed. Here, we present an approach to reconstruct input OAM states from measurements of the spatial intensity distributions they produce. To obviate issues arising from intrinsic symmetry of Laguerre-Gauss modes, we employ a pair of intensity profiles per state projecting it only on two distinct bases, showing how this allows to uniquely recover input states from the collected data. Our approach is based on a combined application of dimensionality reduction via principal component analysis, and linear regression, and thus has a low computational cost during both training and testing stages. We showcase our approach in a real photonic setup, generating up-to-four-dimensional OAM states through quantum walk dynamics. The high performance and versatility of the demonstrated approach make it an ideal tool to characterize high-dimensional states in quantum information protocols.