Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2006.14471 · China Communications

Wireless communication based on microwave photon-level detection with superconducting devices: Achievable rate prediction

Junyu Zhang, Chen Gong, Shangbin Li, Rui Ni, Chengjie Zuo, Jinkang Zhu, Ming Zhao, Zhengyuan Xu

Published May 10, 2022• 2 citations
arXivHTMLPDF

Abstract

Future wireless communication system embraces physical-layer signal detection with high sensitivity, especially in the microwave photon level. Currently, the receiver primarily adopts the signal detection based on semi-conductor devices for signal detection, while this paper introduces high-sensitivity photon-level microwave detection based on superconducting structure. We first overview existing works on the photon-level communication in the optical spectrum as well as the microwave photon-level sensing based on superconducting structure in both theoretical and experimental perspectives, including microwave detection circuit model based on Josephson junction, microwave photon counter based on Josephson junction, and two reconstruction approaches under background noise. In addition, we characterize channel modeling based on two different microwave photon detection approaches, including the absorption barrier and the dual-path Handury Brown-Twiss (HBT) experiments, and predict the corresponding achievable rates. According to the performance prediction, it is seen that the microwave photon-level signal detection can increase the receiver sensitivity compared with the state-of-the-art standardized communication system with waveform signal reception, with gain over 10dB.

DOI
10.23919/jcc.2022.00.017

Related papers

Microwave Communication Under Weak Intensity to Quantumized Level: Recent Progress and Future Challenges

Chen Gong, Shanchi Wu, Chengjie Zuo +9 more

We provide an overview of the recent progresses on the system architecture design and performance prediction for microwave signal detection under weak signal intensity regime, up to quantumized level. The technique roadmap includes two perspectives, the opto-electro-mechanical (OEM) and superconducting devices. For the former one, we first overview the concept of OEM, and then introduce the signal detection based on capacitive-opto-electro-mechanical systems and piezo- opto-electro-mechanical systems. For the latter one, we first overview the concept and architecture of Josephson junction, and then introduce the signal detection based on superconducting Hanbury Brown-Twiss (HBT) experiments and Λ energy-level splitting system. Besides, we review the microwave detection based on Rydberg atom system. We believe that this overview can provide a guidance for future transmission limit, signal processing, detection device fabrication and real experiments.

Journal of Communications and Information Networks•Mar 1, 2021•1 citation

Photon-level Quantumized Microwave Detection Based on Artificial $\Lambda$-Type Three-level System with Superconducting Devices: Performance Prediction

Junyu Zhang, Chen Gong, Shangbin Li +5 more

We adopt artificial $\Lambda$-type three level system with superconducting devices for microwave signal detection, where the signal intensity can reach the level of discrete photons instead of continuous waveform. Based on the state transition principles, we propose a statistical model for microwave signal detection. Moreover, we investigate the achievable transmission rate and signal detection based on the statistical model. It is predicted that the proposed detection can achieve significantly higher sensitivity compared with the currently deployed $4$G communication system.

•Jun 25, 2020•0 citations

Quantumized Microwave Detection Based on Λ-Type Three-Level Superconducting System: HMM Modeling and Performance Prediction

Junyu Zhang, Chen Gong, Shangbin Li +6 more

We adopt artificial$\Lambda $-type three-level system with superconducting devices for microwave signal detection, where the signal intensity reaches the level of discrete photons instead of continuous waveform. Based on the state transition principles of the three-level system, we propose a statistical model for microwave signal detection. In addition, achievable transmission rates and signal detection based on the proposed statistical models are investigated for low temperature conditions in deep space communication scenario. It is predicted that high sensitivity can be achieved by the proposed system. We further characterize the received signal considering the saturation phenomenon of three-level system, which reveals negligible performance degradation caused by saturation under weak received power regime.

arXiv:2006.14497•IEEE Transactions on Communications•Aug 2, 2021•2 citations

Perspectives for Single Microwave Photon Detection

S. Pagano

The detection of single microwave photons is becoming a cornerstone of fundamental experiments in circuit quantum electrodynamics and quantum sensing. Experiments in cavity quantum electrodynamics, photon-mediated entanglement, dark-matter axion searches and quantum thermodynamics increasingly rely on single-photon sensitivity. Current technologies exploit superconducting devices, including Josephson parametric detectors, and transmon-based non-demolition counters for dark-matter haloscopes. Hybrid double quantum dot-Josephson systems reach interesting levels of efficiency, while current-biased Josephson junctions show potential for near-quantumlimited resolution. Despite impressive progress, challenges remain in reducing dark counts, improving reset speed, and scaling for multiplexed arrays. Continued advances in superconducting materials, qubit coherence, and hybrid semiconductor-superconductor designs promise to extend detection efficiency and bandwidth. These developments are poised to enable the next generation of quantum-enabled experiments, from foundational tests in quantum optics to searches for new physics.

Photonics & Electromagnetics Research Symposium - Fall (PIERS-Fall)•Nov 4, 2025•0 citations

Experimental demonstrations of Josephson threshold detectors for broadband microwave photons detection

J. X. He, P. H. Ouyang, Y. Q. Chai +3 more

In this Letter, we experimentally demonstrated that Josephson threshold detectors (JTDs) could be developed to implement the sensitive detection of broadband microwave photons. Beginning with the numerical simulations of the damped dynamics for the macroscopic phase particle generated by a Josephson junction (JJ), we showed that the time-domain threshold voltage state switched measurements of the JJ driven by a low-frequency triangular wave current, which could be utilized to implement the sensitive microwave photons detection. The detectable signal power can be determined by using the Kumar–Caroll index to quantify the distinguishability between two statistical distributions on the measured threshold switched durations of the JJ with and without the signal input. Experimentally, we fabricated the Al/AlOx/Al JJ and measured its threshold responses, at 50 mK temperature, to the input microwave photons at the frequency of ∼5 GHz. The experimental results indicated that the weak microwave signals, which are phenomenologically threatened by the additional thermal noise that modifies the damped phase dynamics of the JJ, can be detected by the fabricated JTD. The detectable power of the microwave signals demonstrated here was calibrated as about −92 dBm (corresponding to the photons rate of ∼2×108 photons/ms). Based on the numerical simulations for optimizing the relevant performance indicators of the detectors, we further argue that the JTDs could be utilized to achieve the sensitive detection of broadband microwave photons at the single-photon level.

arXiv:2502.14300•Applied Physics Letters•May 19, 2025•5 citations

Quantum Microwave Photodetection Using Superconducting Josephson Circuits.

Brendan Osberg

Superconducting circuits have recently become a major contender for the implementation of quantum computers owing to their compatibility with existing microchip fabrication technologies. Their utility stems largely from their ability to be coupled with resonant cavities for the purposes of trapping and relaying microwave radiation. Because of this feature, scientists are able to transmit quantum information from a variety of qubits. Though quantum-limited amplifiers exist, unfortunately there currently exists no microwave photon counter capable of single shot quantum detection. Hence, we use superconducting circuits with Josephson junctions to design a microwave photon detector based on a modified phase qubit that exhibits a bandwidth of 4GHz, and a detection fidelity of 98%. We use metastable barrier transition (driven by incident photons) to create an avalanche effect analogous to current photo-diodes. Linear coupling of the junction flux with the radiation permits photodetection from an arbitrary quantum source in the GHz range. We show the device to be robust to changes in drive frequency, temporal photon width, and resonator quality factor, and we optimize our device with respect to these parameters. We show the device to be stable over the necessary time scales, and yet sensitive enough to accurately measure photons on demand.

•Sep 3, 2009•0 citations
Future wireless communication system embraces physical-layer signal detection with high sensitivity, especially in the microwave photon level. Currently, the receiver primarily adopts the signal detection based on semi-conductor devices for signal detection, while this paper introduces high-sensitivity photon-level microwave detection based on superconducting structure. We first overview existing works on the photon-level communication in the optical spectrum as well as the microwave photon-level sensing based on superconducting structure in both theoretical and experimental perspectives, including microwave detection circuit model based on Josephson junction, microwave photon counter based on Josephson junction, and two reconstruction approaches under background noise. In addition, we characterize channel modeling based on two different microwave photon detection approaches, including the absorption barrier and the dual-path Handury Brown-Twiss (HBT) experiments, and predict the corresponding achievable rates. According to the performance prediction, it is seen that the microwave photon-level signal detection can increase the receiver sensitivity compared with the state-of-the-art standardized communication system with waveform signal reception, with gain over 10dB.
We provide an overview of the recent progresses on the system architecture design and performance prediction for microwave signal detection under weak signal intensity regime, up to quantumized level. The technique roadmap includes two perspectives, the opto-electro-mechanical (OEM) and superconducting devices. For the former one, we first overview the concept of OEM, and then introduce the signal detection based on capacitive-opto-electro-mechanical systems and piezo- opto-electro-mechanical systems. For the latter one, we first overview the concept and architecture of Josephson junction, and then introduce the signal detection based on superconducting Hanbury Brown-Twiss (HBT) experiments and Λ energy-level splitting system. Besides, we review the microwave detection based on Rydberg atom system. We believe that this overview can provide a guidance for future transmission limit, signal processing, detection device fabrication and real experiments.
Photon-level Quantumized Microwave Detection Based on Artificial Λ\LambdaΛ-Type Three-level System with Superconducting Devices: Performance Prediction
We adopt artificial Λ\LambdaΛ-type three level system with superconducting devices for microwave signal detection, where the signal intensity can reach the level of discrete photons instead of continuous waveform. Based on the state transition principles, we propose a statistical model for microwave signal detection. Moreover, we investigate the achievable transmission rate and signal detection based on the statistical model. It is predicted that the proposed detection can achieve significantly higher sensitivity compared with the currently deployed 444G communication system.
We adopt artificial$\Lambda $-type three-level system with superconducting devices for microwave signal detection, where the signal intensity reaches the level of discrete photons instead of continuous waveform. Based on the state transition principles of the three-level system, we propose a statistical model for microwave signal detection. In addition, achievable transmission rates and signal detection based on the proposed statistical models are investigated for low temperature conditions in deep space communication scenario. It is predicted that high sensitivity can be achieved by the proposed system. We further characterize the received signal considering the saturation phenomenon of three-level system, which reveals negligible performance degradation caused by saturation under weak received power regime.
The detection of single microwave photons is becoming a cornerstone of fundamental experiments in circuit quantum electrodynamics and quantum sensing. Experiments in cavity quantum electrodynamics, photon-mediated entanglement, dark-matter axion searches and quantum thermodynamics increasingly rely on single-photon sensitivity. Current technologies exploit superconducting devices, including Josephson parametric detectors, and transmon-based non-demolition counters for dark-matter haloscopes. Hybrid double quantum dot-Josephson systems reach interesting levels of efficiency, while current-biased Josephson junctions show potential for near-quantumlimited resolution. Despite impressive progress, challenges remain in reducing dark counts, improving reset speed, and scaling for multiplexed arrays. Continued advances in superconducting materials, qubit coherence, and hybrid semiconductor-superconductor designs promise to extend detection efficiency and bandwidth. These developments are poised to enable the next generation of quantum-enabled experiments, from foundational tests in quantum optics to searches for new physics.
In this Letter, we experimentally demonstrated that Josephson threshold detectors (JTDs) could be developed to implement the sensitive detection of broadband microwave photons. Beginning with the numerical simulations of the damped dynamics for the macroscopic phase particle generated by a Josephson junction (JJ), we showed that the time-domain threshold voltage state switched measurements of the JJ driven by a low-frequency triangular wave current, which could be utilized to implement the sensitive microwave photons detection. The detectable signal power can be determined by using the Kumar–Caroll index to quantify the distinguishability between two statistical distributions on the measured threshold switched durations of the JJ with and without the signal input. Experimentally, we fabricated the Al/AlOx/Al JJ and measured its threshold responses, at 50 mK temperature, to the input microwave photons at the frequency of ∼5 GHz. The experimental results indicated that the weak microwave signals, which are phenomenologically threatened by the additional thermal noise that modifies the damped phase dynamics of the JJ, can be detected by the fabricated JTD. The detectable power of the microwave signals demonstrated here was calibrated as about −92 dBm (corresponding to the photons rate of ∼2×108 photons/ms). Based on the numerical simulations for optimizing the relevant performance indicators of the detectors, we further argue that the JTDs could be utilized to achieve the sensitive detection of broadband microwave photons at the single-photon level.
Superconducting circuits have recently become a major contender for the implementation of quantum computers owing to their compatibility with existing microchip fabrication technologies. Their utility stems largely from their ability to be coupled with resonant cavities for the purposes of trapping and relaying microwave radiation. Because of this feature, scientists are able to transmit quantum information from a variety of qubits. Though quantum-limited amplifiers exist, unfortunately there currently exists no microwave photon counter capable of single shot quantum detection. Hence, we use superconducting circuits with Josephson junctions to design a microwave photon detector based on a modified phase qubit that exhibits a bandwidth of 4GHz, and a detection fidelity of 98%. We use metastable barrier transition (driven by incident photons) to create an avalanche effect analogous to current photo-diodes. Linear coupling of the junction flux with the radiation permits photodetection from an arbitrary quantum source in the GHz range. We show the device to be robust to changes in drive frequency, temporal photon width, and resonator quality factor, and we optimize our device with respect to these parameters. We show the device to be stable over the necessary time scales, and yet sensitive enough to accurately measure photons on demand.