Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2005.05275 · PRX Quantum

Improving the Performance of Deep Quantum Optimization Algorithms with Continuous Gate Sets

Nathan Lacroix, Christoph Hellings, Christian Kraglund Andersen, Agustín Di Paolo, Ants Remm, Stefania Lazar, Sebastian Krinner, Graham J. Norris, Mihai S. Gabureac, Johannes Heinsoo, Alexandre Blais, Christopher Eichler, Andreas J. Wallraff

Published Oct 20, 2020• 80 citations
arXivHTMLPDF

Abstract

Variational quantum algorithms are believed to be promising for solving computationally hard problems and are often comprised of repeated layers of quantum gates. An example thereof is the quantum approximate optimization algorithm (QAOA), an approach to solve combinatorial optimization problems on noisy intermediate-scale quantum (NISQ) systems. Gaining computational power from QAOA critically relies on the mitigation of errors during the execution of the algorithm, which for coherence-limited operations is achievable by reducing the gate count. Here, we demonstrate an improvement of up to a factor of 3 in algorithmic performance as measured by the success probability, by implementing a continuous hardware-efficient gate set using superconducting quantum circuits. This gate set allows us to perform the phase separation step in QAOA with a single physical gate for each pair of qubits instead of decomposing it into two C$Z$-gates and single-qubit gates. With this reduced number of physical gates, which scales with the number of layers employed in the algorithm, we experimentally investigate the circuit-depth-dependent performance of QAOA applied to exact-cover problem instances mapped onto three and seven qubits, using up to a total of 399 operations and up to 9 layers. Our results demonstrate that the use of continuous gate sets may be a key component in extending the impact of near-term quantum computers.

DOI
10.1103/prxquantum.1.020304

Related papers

Improving the Performance of Deep Quantum Optimization Algorithms with Continuous Gate Sets

Nathan Lacroix, Christoph Hellings, Christian Kraglund Andersen +10 more

Variational quantum algorithms are believed to be promising for solving computationally hard problems on noisy intermediate-scale quantum (NISQ) systems. Gaining computational power from these algorithms critically relies on the mitigation of errors during their execution, which for coherence-limited operations is achievable by reducing the gate count. Here, we demonstrate an improvement of up to a factor of 3 in algorithmic performance for the quantum approximate optimization algorithm (QAOA) as measured by the success probability, by implementing a continuous hardware-efficient gate set using superconducting quantum circuits. This gate set allows us to perform the phase separation step in QAOA with a single physical gate for each pair of qubits instead of decomposing it into two CZ gates and single-qubit gates. With this reduced number of physical gates, which scales with the number of layers employed in the algorithm, we experimentally investigate the circuit-depth-dependent performance of QAOA applied to exact-cover problem instances mapped onto three and seven qubits, using up to a total of 399 operations and up to nine layers. Our results demonstrate that the use of continuous gate sets may be a key component in extending the impact of near-term quantum computers.

•Jan 1, 2020•59 citations

Error Mitigation–Driven Enhancement of QAOA Performance on NISQ Devices

Kondreddy Sathwika, Maka Sri Varshith, Marati Nanda Kumar +1 more

The Quantum Approximate Optimization Algorithm (QAOA) is widely regarded as a promising near-term quantum algorithm for addressing hard combinatorial optimization problems on Noisy Intermediate-Scale Quantum (NISQ) devices; however, its real-world effectiveness is severely constrained by hardware noise, including gate infidelities, decoherence, and measurement errors. This work explores an error mitigation–driven approach to enhance the performance and robustness of QAOA without altering its algorithmic structure or requiring fault-tolerant quantum resources. Measurement error mitigation and zero-noise extrapolation are incorporated into the execution and post-processing stages of QAOA circuits and evaluated using the Minimum Vertex Cover problem as a representative benchmark. Performance is assessed through approximation ratios, solution stability, and noise sensitivity across multiple circuit depths. The results indicate that error mitigation not only improves approximation accuracy but also stabilizes output distributions and delays performance degradation at increased circuit depths. Additionally, the mitigated executions demonstrate better consistency across repeated runs, highlighting improved resilience to stochastic noise. These findings emphasize that lightweight and hardware-efficient error mitigation techniques can significantly extend the practical usability of QAOA on current NISQ hardware, providing a scalable and realistic pathway for executing quantum optimization algorithms more reliably in near-term quantum computing environments.

International Conference on AI-Driven Smart Systems and Ubiquitous Computing (ICAUC)•Jan 19, 2026•0 citations

Noise resilient compilation policies for quantum approximate optimization algorithm

Mahabubul Alam, Abdullah Ash Saki, Junde Li +2 more

Quantum approximate optimization algorithm (QAOA) is a promising quantum-classical hybrid algorithm to solve hard combinatorial optimization problems using noisy quantum devices. The multiqubit CPHASE gates used in the quantum circuit for QAOA are commutative i.e., the order of the gates can be altered without changing the output state. This re-ordering leads to the execution of more gates in parallel and a smaller number of additional SWAP gates to compile the QAOA circuit resulting in lower circuit-depth and gate-count. A less number of gates generally indicates a lower accumulation of gate-errors, and a reduced circuit-depth means less decoherence time for the qubits. However, near-term quantum devices exhibit significant variations in the gate success probabilities. Variation-aware compilation policies (i.e. putting most gate operations on qubits with higher gate success probabilities) can enhance the probability of successful program execution on the hardware. The greater flexibility of QAOA-circuits offer better scope of optimization with QAOA-tailored compilation policies. This paper presents an argument for compilation policies to exploit the unique characteristics of QAOA-circuits alongside the variation-awareness of the noisy devices. We present two procedures - variation-aware qubit placement (VQP) and variation-aware iterative mapping (VIM) that can improve the circuit success probability quite significantly (≈8.408X on average) for a set of QAOA-MaxCut problems on ibmq_16_melbourne.

•Nov 2, 2020•14 citations

Circuit Compilation Methodologies for Quantum Approximate Optimization Algorithm

Mahabubul Alam, Abdullah Ash Saki, Swaroop Ghosh

The quantum approximate optimization algorithm (QAOA) is a promising quantum-classical hybrid algorithm to solve hard combinatorial optimization problems. The multi-qubit CPHASE gates used in the quantum circuit for QAOA are commutative i.e., the order of the gates can be altered without changing the output state. This re-ordering leads to the execution of more gates in parallel and a smaller number of additional SWAP gates to compile the QAOA-circuit. Consequently, the circuit-depth and cumulative gate-count become lower which is beneficial for circuit execution time and noise resilience. A less number of gates indicates a lower accumulation of gate-errors, and a reduced circuit-depth means less decoherence time for the qubits. However, finding the best-ordered circuit is a difficult problem and does not scale well with circuit size. This paper presents four generic methodologies to optimize QAOA-circuits by exploiting gate re-ordering. We demonstrate a reduction in gate-count by ≈23.0% and circuit-depth by ≈53.0% on average over a conventional approach without incurring any compilation-time penalty. We also present a variation-aware compilation which enhances the compiled circuit success probability by ≈62.7% for the target hardware over the variation unaware approach. A new metric, Approximation Ratio Gap (ARG), is proposed to validate the quality of the compiled QAOA-circuit instances on actual devices. Hardware implementation of a number of QAOA instances shows ≈25.8% improvement in the proposed metric on average over the conventional approach on ibmq 16 melbourne.

IEEE/ACM International Symposium on Microarchitecture (MICRO)•Oct 1, 2020•71 citations

Analysis of Quantum Approximate Optimization Algorithm under Realistic Noise in Superconducting Qubits

Mahabubul Alam, Abdullah Ash Saki, Swaroop Ghosh

The quantum approximate optimization algorithm (QAOA) is a promising quantum-classical hybrid technique to solve combinatorial optimization problems in near-term gate-based noisy quantum devices. In QAOA, the objective is a function of the quantum state, which itself is a function of the gate parameters of a multi-level parameterized quantum circuit (PQC). A classical optimizer varies the continuous gate parameters to generate distributions (quantum state) with significant support to the optimal solution. Even at the lowest circuit depth, QAOA offers non-trivial provable performance guarantee which is expected to increase with the circuit depth. However, the existing analysis fails to consider non-idealities in the qubit quality i.e., short lifetime and imperfect gate operations in realistic quantum hardware. In this article, we investigate the impact of various noise sources on the performance of QAOA both in simulation and on a real quantum computer from IBM. Our analyses indicate that the optimal number of stages (p-value) for any QAOA instance is limited by the noise characteristics (gate error, coherence time, etc.) of the target hardware as opposed to the current perception that higher-depth QAOA will provide monotonically better performance for a given problem compared to the low-depth implementations.

arXiv:1907.09631•Jul 13, 2019•33 citations

Dynamic adaptive quantum approximate optimization algorithm for shallow, noise-resilient circuits

Nikola Yanakiev, Normann Mertig, Christopher K. Long +1 more

The quantum approximate optimization algorithm (QAOA) is an appealing proposal to solve NP problems on noisy intermediate-scale quantum (NISQ) hardware. Making NISQ implementations of the QAOA resilient to noise requires short ansatz circuits with as few controlled- () gates as possible. Here we present the dynamic adaptive quantum approximate optimization algorithm (Dynamic-ADAPT-QAOA). Our algorithm significantly reduces the circuit depth and the count of standard ADAPT-QAOA, a leading proposal for near-term implementations of the QAOA. Throughout our algorithm, the decision to apply -intensive operations is made dynamically, based on algorithmic benefits. Using density-matrix simulations, we benchmark the noise resilience of ADAPT-QAOA and Dynamic-ADAPT-QAOA. We compute the gate-error probability p gate ★ below which these algorithms provide, on average, more accurate solutions than the classical, polynomial-time approximation algorithm by Goemans and Williamson. For small systems with six to ten qubits, we show that p gate ★ > 10 − 3 for Dynamic-ADAPT-QAOA. Compared to standard ADAPT-QAOA, this constitutes an order-of-magnitude improvement in noise resilience. This improvement should make Dynamic-ADAPT-QAOA viable for implementations on superconducting NISQ hardware, even in the absence of error mitigation. Published by the American Physical Society 2024

arXiv:2309.00047•Physical Review A•Mar 20, 2024•17 citations
Variational quantum algorithms are believed to be promising for solving computationally hard problems and are often comprised of repeated layers of quantum gates. An example thereof is the quantum approximate optimization algorithm (QAOA), an approach to solve combinatorial optimization problems on noisy intermediate-scale quantum (NISQ) systems. Gaining computational power from QAOA critically relies on the mitigation of errors during the execution of the algorithm, which for coherence-limited operations is achievable by reducing the gate count. Here, we demonstrate an improvement of up to a factor of 3 in algorithmic performance as measured by the success probability, by implementing a continuous hardware-efficient gate set using superconducting quantum circuits. This gate set allows us to perform the phase separation step in QAOA with a single physical gate for each pair of qubits instead of decomposing it into two CZZZ-gates and single-qubit gates. With this reduced number of physical gates, which scales with the number of layers employed in the algorithm, we experimentally investigate the circuit-depth-dependent performance of QAOA applied to exact-cover problem instances mapped onto three and seven qubits, using up to a total of 399 operations and up to 9 layers. Our results demonstrate that the use of continuous gate sets may be a key component in extending the impact of near-term quantum computers.
Variational quantum algorithms are believed to be promising for solving computationally hard problems on noisy intermediate-scale quantum (NISQ) systems. Gaining computational power from these algorithms critically relies on the mitigation of errors during their execution, which for coherence-limited operations is achievable by reducing the gate count. Here, we demonstrate an improvement of up to a factor of 3 in algorithmic performance for the quantum approximate optimization algorithm (QAOA) as measured by the success probability, by implementing a continuous hardware-efficient gate set using superconducting quantum circuits. This gate set allows us to perform the phase separation step in QAOA with a single physical gate for each pair of qubits instead of decomposing it into two CZ gates and single-qubit gates. With this reduced number of physical gates, which scales with the number of layers employed in the algorithm, we experimentally investigate the circuit-depth-dependent performance of QAOA applied to exact-cover problem instances mapped onto three and seven qubits, using up to a total of 399 operations and up to nine layers. Our results demonstrate that the use of continuous gate sets may be a key component in extending the impact of near-term quantum computers.
The Quantum Approximate Optimization Algorithm (QAOA) is widely regarded as a promising near-term quantum algorithm for addressing hard combinatorial optimization problems on Noisy Intermediate-Scale Quantum (NISQ) devices; however, its real-world effectiveness is severely constrained by hardware noise, including gate infidelities, decoherence, and measurement errors. This work explores an error mitigation–driven approach to enhance the performance and robustness of QAOA without altering its algorithmic structure or requiring fault-tolerant quantum resources. Measurement error mitigation and zero-noise extrapolation are incorporated into the execution and post-processing stages of QAOA circuits and evaluated using the Minimum Vertex Cover problem as a representative benchmark. Performance is assessed through approximation ratios, solution stability, and noise sensitivity across multiple circuit depths. The results indicate that error mitigation not only improves approximation accuracy but also stabilizes output distributions and delays performance degradation at increased circuit depths. Additionally, the mitigated executions demonstrate better consistency across repeated runs, highlighting improved resilience to stochastic noise. These findings emphasize that lightweight and hardware-efficient error mitigation techniques can significantly extend the practical usability of QAOA on current NISQ hardware, providing a scalable and realistic pathway for executing quantum optimization algorithms more reliably in near-term quantum computing environments.
Quantum approximate optimization algorithm (QAOA) is a promising quantum-classical hybrid algorithm to solve hard combinatorial optimization problems using noisy quantum devices. The multiqubit CPHASE gates used in the quantum circuit for QAOA are commutative i.e., the order of the gates can be altered without changing the output state. This re-ordering leads to the execution of more gates in parallel and a smaller number of additional SWAP gates to compile the QAOA circuit resulting in lower circuit-depth and gate-count. A less number of gates generally indicates a lower accumulation of gate-errors, and a reduced circuit-depth means less decoherence time for the qubits. However, near-term quantum devices exhibit significant variations in the gate success probabilities. Variation-aware compilation policies (i.e. putting most gate operations on qubits with higher gate success probabilities) can enhance the probability of successful program execution on the hardware. The greater flexibility of QAOA-circuits offer better scope of optimization with QAOA-tailored compilation policies. This paper presents an argument for compilation policies to exploit the unique characteristics of QAOA-circuits alongside the variation-awareness of the noisy devices. We present two procedures - variation-aware qubit placement (VQP) and variation-aware iterative mapping (VIM) that can improve the circuit success probability quite significantly (≈8.408X on average) for a set of QAOA-MaxCut problems on ibmq_16_melbourne.
The quantum approximate optimization algorithm (QAOA) is a promising quantum-classical hybrid algorithm to solve hard combinatorial optimization problems. The multi-qubit CPHASE gates used in the quantum circuit for QAOA are commutative i.e., the order of the gates can be altered without changing the output state. This re-ordering leads to the execution of more gates in parallel and a smaller number of additional SWAP gates to compile the QAOA-circuit. Consequently, the circuit-depth and cumulative gate-count become lower which is beneficial for circuit execution time and noise resilience. A less number of gates indicates a lower accumulation of gate-errors, and a reduced circuit-depth means less decoherence time for the qubits. However, finding the best-ordered circuit is a difficult problem and does not scale well with circuit size. This paper presents four generic methodologies to optimize QAOA-circuits by exploiting gate re-ordering. We demonstrate a reduction in gate-count by ≈23.0% and circuit-depth by ≈53.0% on average over a conventional approach without incurring any compilation-time penalty. We also present a variation-aware compilation which enhances the compiled circuit success probability by ≈62.7% for the target hardware over the variation unaware approach. A new metric, Approximation Ratio Gap (ARG), is proposed to validate the quality of the compiled QAOA-circuit instances on actual devices. Hardware implementation of a number of QAOA instances shows ≈25.8% improvement in the proposed metric on average over the conventional approach on ibmq 16 melbourne.
The quantum approximate optimization algorithm (QAOA) is a promising quantum-classical hybrid technique to solve combinatorial optimization problems in near-term gate-based noisy quantum devices. In QAOA, the objective is a function of the quantum state, which itself is a function of the gate parameters of a multi-level parameterized quantum circuit (PQC). A classical optimizer varies the continuous gate parameters to generate distributions (quantum state) with significant support to the optimal solution. Even at the lowest circuit depth, QAOA offers non-trivial provable performance guarantee which is expected to increase with the circuit depth. However, the existing analysis fails to consider non-idealities in the qubit quality i.e., short lifetime and imperfect gate operations in realistic quantum hardware. In this article, we investigate the impact of various noise sources on the performance of QAOA both in simulation and on a real quantum computer from IBM. Our analyses indicate that the optimal number of stages (p-value) for any QAOA instance is limited by the noise characteristics (gate error, coherence time, etc.) of the target hardware as opposed to the current perception that higher-depth QAOA will provide monotonically better performance for a given problem compared to the low-depth implementations.
The quantum approximate optimization algorithm (QAOA) is an appealing proposal to solve NP problems on noisy intermediate-scale quantum (NISQ) hardware. Making NISQ implementations of the QAOA resilient to noise requires short ansatz circuits with as few controlled- () gates as possible. Here we present the dynamic adaptive quantum approximate optimization algorithm (Dynamic-ADAPT-QAOA). Our algorithm significantly reduces the circuit depth and the count of standard ADAPT-QAOA, a leading proposal for near-term implementations of the QAOA. Throughout our algorithm, the decision to apply -intensive operations is made dynamically, based on algorithmic benefits. Using density-matrix simulations, we benchmark the noise resilience of ADAPT-QAOA and Dynamic-ADAPT-QAOA. We compute the gate-error probability p gate ★ below which these algorithms provide, on average, more accurate solutions than the classical, polynomial-time approximation algorithm by Goemans and Williamson. For small systems with six to ten qubits, we show that p gate ★ > 10 − 3 for Dynamic-ADAPT-QAOA. Compared to standard ADAPT-QAOA, this constitutes an order-of-magnitude improvement in noise resilience. This improvement should make Dynamic-ADAPT-QAOA viable for implementations on superconducting NISQ hardware, even in the absence of error mitigation. Published by the American Physical Society 2024