Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2003.11269 · Entropy

Simulating Finite-Time Isothermal Processes with Superconducting Quantum Circuits

Jin-Fu Chen, Ying Li, Hui Dong

Published Mar 16, 2021• 8 citations
arXivHTMLPDF

Abstract

Finite-time isothermal processes are ubiquitous in quantum-heat-engine cycles, yet complicated due to the coexistence of the changing Hamiltonian and the interaction with the thermal bath. Such complexity prevents classical thermodynamic measurements of a performed work. In this paper, the isothermal process is decomposed into piecewise adiabatic and isochoric processes to measure the performed work as the internal energy change in adiabatic processes. The piecewise control scheme allows the direct simulation of the whole process on a universal quantum computer, which provides a new experimental platform to study quantum thermodynamics. We implement the simulation on ibmqx2 to show the 1/τ scaling of the extra work in finite-time isothermal processes.

DOI
10.3390/e23030353

Related papers

Boosting the performance of quantum Otto heat engines

Jin-Fu Chen, Chang-Pu Sun, Hui Dong

To optimize the performance of a heat engine in a finite-time cycle, it is important to understand the finite-time effect of thermodynamic processes. Previously, we have shown that extra work is needed to complete a quantum adiabatic process in finite time, and proved that the extra work follows a C/τ^{2} scaling for long control time τ. There the oscillating part of the extra work is neglected due to the complex energy-level structure of the particular quantum system. However, such oscillation of the extra work cannot be neglected in some quantum systems with simple energy-level structure, e.g., the two-level system or the quantum harmonic oscillator. In this paper, we build the finite-time quantum Otto engine on these simple systems, and find that the oscillating extra work leads to a jagged edge in the constraint relation between the output power and the efficiency. By optimizing the control time of the adiabatic processes, the oscillation in the extra work is utilized to enhance the maximum power and the efficiency. We further design special control schemes with the zero extra work at the specific control time. Compared to the linear control scheme, these special control schemes of the finite-time adiabatic process improve the maximum power and the efficiency of the finite-time Otto engine.

arXiv:1907.11567•Physical review. E•Sep 30, 2019•39 citations

The heat and work of quantum thermodynamic processes with quantum coherence

Shanhe Su, Jinfu Chen, Yuhan Ma +2 more

Energy is often partitioned into heat and work by two independent paths corresponding to the change in the eigenenergies or the probability distributions of a quantum system. The discrepancies of the heat and work for various quantum thermodynamic processes have not been well characterized in literature. Here we show how the work in quantum machines is differentially related to the isochoric, isothermal, and adiabatic processes. We prove that the energy exchanges during the quantum isochoric and isothermal processes are simply depending on the change in the eigenenergies or the probability distributions. However, for a time-dependent system in a non-adiabatic quantum evolution, the transitions between the different quantum states representing the quantum coherence can affect the essential thermodynamic properties, and thus the general definitions of the heat and work should be clarified with respect to the microscopic generic time-dependent system. By integrating the coherence effects in the exactly-solvable dynamics of quantum-spin precession, the internal energy is rigorously transferred as the work in the thermodynamic adiabatic process. The present study demonstrates that the quantum adiabatic process is sufficient but not necessary for the thermodynamic adiabatic process.

arXiv:1705.07618•Chinese Physics B•Jun 1, 2018•28 citations

Finite-time thermodynamic process of a two-level quantum heat engine

Yigermal Bassie, Tibebe Birhanu, Yoseph Abebe +1 more

In this paper, we consider a model of two-level quantum heat engine to investigate the explicit analytic expression for the thermodynamics quantities in different condition under the finite-time operation. In this engine, the working substance is composed of a spin-half particles immersed in a magnetic field. The finite-time thermodynamic processes consisting of two quantum adiabatic and two quantum isothermal processes. This processes working between two heat reservoirs with an inverse temperatures $β_{1}$ and $β_{2}$ ($<β_{1}$). In this processes, we obtain the work, heat, power and efficiency at maximum power output of the model. Our result of the efficiency at maximum power agree with the universal value in the first order of Carnot efficiency.

arXiv:2207.00867•Jul 2, 2022•1 citation

The laws of thermodynamics for quantum dissipative systems: A quasi-equilibrium Helmholtz energy approach

Shoki Koyanagi, Yoshitaka Tanimura

By using the quasi-equilibrium Helmholtz energy, which is defined as the thermodynamic work in a quasi-static process, we investigate the thermal properties of both an isothermal process and a transition process between the adiabatic and isothermal states (adiabatic transition). Here, the work is defined by the change in energy from a steady state to another state under a time-dependent perturbation. In particular, the work for a quasi-static change is regarded as thermodynamic work. We employ a system-bath model that involves time-dependent perturbations in both the system and the system-bath interaction. We conduct numerical experiments for a three-stroke heat machine (a Kelvin-Planck cycle). For this purpose, we employ the hierarchical equations of motion (HEOM) approach. These experiments involve an adiabatic transition field that describes the operation of an adiabatic wall between the system and the bath. Thermodynamic-work diagrams for external fields and their conjugate variables, similar to the P-V diagram, are introduced to analyze the work done for the system in the cycle. We find that the thermodynamic efficiency of this machine is zero because the field for the isothermal processes acts as a refrigerator, whereas that for the adiabatic wall acts as a heat engine. This is a numerical manifestation of the Kelvin-Planck statement, which states that it is impossible to derive the mechanical effects from a single heat source. These HEOM simulations serve as a rigorous test of thermodynamic formulations because the second law of thermodynamics is only valid when the work involved in the operation of the adiabatic wall is treated accurately.

arXiv:2205.11665•The Journal of Chemical Physics•Jun 9, 2022•12 citations

Optimal thermodynamic control in open quantum systems

Vasco Cavina, Andrea Mari, A. Carlini +1 more

We apply advanced methods of control theory to open quantum systems and we determine finite-time processes which are optimal with respect to thermodynamic performances. General properties and necessary conditions characterizing optimal drivings are derived, obtaining bang-bang-type solutions corresponding to control strategies switching between adiabatic and isothermal transformations. A direct application of these results is the maximization of the work produced by a generic quantum heat engine, where we show that the maximum power is directly linked to a particular conserved quantity naturally emerging from the control problem. Finally we apply our general approach to the specific case of a two-level system, which can be put in contact with two different baths at fixed temperatures, identifying the processes that minimize heat dissipation. Moreover, we explicitly solve the optimization problem for a cyclic two-level heat engine driven beyond the linear-response regime, determining the corresponding optimal cycle, the maximum power, and the efficiency at maximum power.

arXiv:1709.07400•Physical Review A•Jul 27, 2018•47 citations

Maximum Power Output of Quantum Heat Engine with Energy Bath

Shengnan Liu, Congjie Ou

The difference between quantum isoenergetic process and quantum isothermal process comes from the violation of the law of equipartition of energy in the quantum regime. To reveal an important physical meaning of this fact, here we study a special type of quantum heat engine consisting of three processes: isoenergetic, isothermal and adiabatic processes. Therefore, this engine works between the energy and heat baths. Combining two engines of this kind, it is possible to realize the quantum Carnot engine. Furthermore, considering finite velocity of change of the potential shape, here an infinite square well with moving walls, the power output of the engine is discussed. It is found that the efficiency and power output are both closely dependent on the initial and final states of the quantum isothermal process. The performance of the engine cycle is shown to be optimized by control of the occupation probability of the ground state, which is determined by the temperature and the potential width. The relation between the efficiency and power output is also discussed.

arXiv:1606.02948•Entropy•May 25, 2016•24 citations
Finite-time isothermal processes are ubiquitous in quantum-heat-engine cycles, yet complicated due to the coexistence of the changing Hamiltonian and the interaction with the thermal bath. Such complexity prevents classical thermodynamic measurements of a performed work. In this paper, the isothermal process is decomposed into piecewise adiabatic and isochoric processes to measure the performed work as the internal energy change in adiabatic processes. The piecewise control scheme allows the direct simulation of the whole process on a universal quantum computer, which provides a new experimental platform to study quantum thermodynamics. We implement the simulation on ibmqx2 to show the 1/τ scaling of the extra work in finite-time isothermal processes.
To optimize the performance of a heat engine in a finite-time cycle, it is important to understand the finite-time effect of thermodynamic processes. Previously, we have shown that extra work is needed to complete a quantum adiabatic process in finite time, and proved that the extra work follows a C/τ^{2} scaling for long control time τ. There the oscillating part of the extra work is neglected due to the complex energy-level structure of the particular quantum system. However, such oscillation of the extra work cannot be neglected in some quantum systems with simple energy-level structure, e.g., the two-level system or the quantum harmonic oscillator. In this paper, we build the finite-time quantum Otto engine on these simple systems, and find that the oscillating extra work leads to a jagged edge in the constraint relation between the output power and the efficiency. By optimizing the control time of the adiabatic processes, the oscillation in the extra work is utilized to enhance the maximum power and the efficiency. We further design special control schemes with the zero extra work at the specific control time. Compared to the linear control scheme, these special control schemes of the finite-time adiabatic process improve the maximum power and the efficiency of the finite-time Otto engine.
Energy is often partitioned into heat and work by two independent paths corresponding to the change in the eigenenergies or the probability distributions of a quantum system. The discrepancies of the heat and work for various quantum thermodynamic processes have not been well characterized in literature. Here we show how the work in quantum machines is differentially related to the isochoric, isothermal, and adiabatic processes. We prove that the energy exchanges during the quantum isochoric and isothermal processes are simply depending on the change in the eigenenergies or the probability distributions. However, for a time-dependent system in a non-adiabatic quantum evolution, the transitions between the different quantum states representing the quantum coherence can affect the essential thermodynamic properties, and thus the general definitions of the heat and work should be clarified with respect to the microscopic generic time-dependent system. By integrating the coherence effects in the exactly-solvable dynamics of quantum-spin precession, the internal energy is rigorously transferred as the work in the thermodynamic adiabatic process. The present study demonstrates that the quantum adiabatic process is sufficient but not necessary for the thermodynamic adiabatic process.
In this paper, we consider a model of two-level quantum heat engine to investigate the explicit analytic expression for the thermodynamics quantities in different condition under the finite-time operation. In this engine, the working substance is composed of a spin-half particles immersed in a magnetic field. The finite-time thermodynamic processes consisting of two quantum adiabatic and two quantum isothermal processes. This processes working between two heat reservoirs with an inverse temperatures β1β_{1}β1​ and β2β_{2}β2​ (<β1<β_{1}<β1​). In this processes, we obtain the work, heat, power and efficiency at maximum power output of the model. Our result of the efficiency at maximum power agree with the universal value in the first order of Carnot efficiency.
By using the quasi-equilibrium Helmholtz energy, which is defined as the thermodynamic work in a quasi-static process, we investigate the thermal properties of both an isothermal process and a transition process between the adiabatic and isothermal states (adiabatic transition). Here, the work is defined by the change in energy from a steady state to another state under a time-dependent perturbation. In particular, the work for a quasi-static change is regarded as thermodynamic work. We employ a system-bath model that involves time-dependent perturbations in both the system and the system-bath interaction. We conduct numerical experiments for a three-stroke heat machine (a Kelvin-Planck cycle). For this purpose, we employ the hierarchical equations of motion (HEOM) approach. These experiments involve an adiabatic transition field that describes the operation of an adiabatic wall between the system and the bath. Thermodynamic-work diagrams for external fields and their conjugate variables, similar to the P-V diagram, are introduced to analyze the work done for the system in the cycle. We find that the thermodynamic efficiency of this machine is zero because the field for the isothermal processes acts as a refrigerator, whereas that for the adiabatic wall acts as a heat engine. This is a numerical manifestation of the Kelvin-Planck statement, which states that it is impossible to derive the mechanical effects from a single heat source. These HEOM simulations serve as a rigorous test of thermodynamic formulations because the second law of thermodynamics is only valid when the work involved in the operation of the adiabatic wall is treated accurately.
We apply advanced methods of control theory to open quantum systems and we determine finite-time processes which are optimal with respect to thermodynamic performances. General properties and necessary conditions characterizing optimal drivings are derived, obtaining bang-bang-type solutions corresponding to control strategies switching between adiabatic and isothermal transformations. A direct application of these results is the maximization of the work produced by a generic quantum heat engine, where we show that the maximum power is directly linked to a particular conserved quantity naturally emerging from the control problem. Finally we apply our general approach to the specific case of a two-level system, which can be put in contact with two different baths at fixed temperatures, identifying the processes that minimize heat dissipation. Moreover, we explicitly solve the optimization problem for a cyclic two-level heat engine driven beyond the linear-response regime, determining the corresponding optimal cycle, the maximum power, and the efficiency at maximum power.
The difference between quantum isoenergetic process and quantum isothermal process comes from the violation of the law of equipartition of energy in the quantum regime. To reveal an important physical meaning of this fact, here we study a special type of quantum heat engine consisting of three processes: isoenergetic, isothermal and adiabatic processes. Therefore, this engine works between the energy and heat baths. Combining two engines of this kind, it is possible to realize the quantum Carnot engine. Furthermore, considering finite velocity of change of the potential shape, here an infinite square well with moving walls, the power output of the engine is discussed. It is found that the efficiency and power output are both closely dependent on the initial and final states of the quantum isothermal process. The performance of the engine cycle is shown to be optimized by control of the occupation probability of the ground state, which is determined by the temperature and the potential width. The relation between the efficiency and power output is also discussed.