Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2002.06867 · Physical review. B./Physical review. B

Tunable refrigerator for nonlinear quantum electric circuits

Hao Hsu, Matti Silveri, András Gunyhó, Jan Goetz, Gianluigi Catelani, Mikko Möttönen

Published Jun 11, 2020• 21 citations
arXivHTMLPDF

Abstract

The emerging quantum technological applications call for fast and accurate initialization of the corresponding devices to low-entropy quantum states. To this end, we theoretically study a recently demonstrated quantum-circuit refrigerator in the case of nonlinear quantum electric circuits such as superconducting qubits. The maximum refrigeration rate of transmon and flux qubits is observed to be roughly an order of magnitude higher than that of usual linear resonators, increasing flexibility in the design. We find that for typical experimental parameters, the refrigerator is suitable for resetting different qubit types to fidelities above 99.99% in a few or a few tens of nanoseconds depending on the scenario. Thus the refrigerator appears to be a promising tool for quantum technology and for detailed studies of open quantum systems.

DOI
10.1103/physrevb.101.235422

Related papers

Quantum-circuit refrigeration of a superconducting microwave resonator well below a single quantum

Arto Viitanen, Timm Mörstedt, Wallace S. Teixeira +4 more

We experimentally demonstrate a recently proposed single-junction quantum-circuit refrigerator (QCR) as an tunable low-temperature environment for a superconducting 4.7 GHz resonator. With the help of a transmon qubit, we measure the populations of the different resonator Fock states, thus providing reliable access to the temperature of the engineered electromagnetic environment and its effect on the resonator. We demonstrate coherent and thermal resonator states and that the on-demand dissipation provided by the QCR can drive these to a small fraction of a photon on average, even if starting above 1 K. We observe that the QCR can be operated either with a dc bias voltage or a gigahertz rf drive, or a combination of these. The bandwidth of the rf drive is not limited by the circuit itself and consequently, we show that 2.9 GHz continuous and 10 ns pulsed drives lead to identical desired refrigeration of the resonator. These observations answer to the shortcomings of previous works where the Fock states were not resolvable and the QCR exhibited slow charging dynamics. Thus, this work introduces a versatile tool to study open quantum systems, quantum thermodynamics, and to quickly reset superconducting qubits. Published by the American Physical Society 2024

arXiv:2308.00397•Physical Review Research•Jun 10, 2024•9 citations

Quantum-circuit refrigerator

Kuan Yen Tan, Matti Partanen, Russell E. Lake +3 more

Quantum technology promises revolutionizing applications in information processing, communications, sensing and modelling. However, efficient on-demand cooling of the functional quantum degrees of freedom remains challenging in many solid-state implementations, such as superconducting circuits. Here we demonstrate direct cooling of a superconducting resonator mode using voltage-controllable electron tunnelling in a nanoscale refrigerator. This result is revealed by a decreased electron temperature at a resonator-coupled probe resistor, even for an elevated electron temperature at the refrigerator. Our conclusions are verified by control experiments and by a good quantitative agreement between theory and experimental observations at various operation voltages and bath temperatures. In the future, we aim to remove spurious dissipation introduced by our refrigerator and to decrease the operational temperature. Such an ideal quantum-circuit refrigerator has potential applications in the initialization of quantum electric devices. In the superconducting quantum computer, for example, fast and accurate reset of the quantum memory is needed.

arXiv:1606.04728•Nature Communications•May 8, 2017•124 citations

Quantum-Circuit Refrigeration for Superconducting Devices

Matti Partanen, Kuan Yen Tan, Shumpei Masuda +6 more

Superconducting microwave circuits are promising candidates for a variety of different applications, ranging from extremely sensitive photon detectors to large-scale quantum computer. Thus, they may revolutionize our everyday lives in the future through substantial technological development. Superconducting quantum circuits typically operate at low power levels and consist of linear and nonlinear resonators. In order to enhance their operation fidelity, they need to be cooled efficiently, and the dissipation of the circuit needs to be well engineered. In this chapter, we describe a refrigerator for electric quantum circuits based on photon-assisted electron tunneling in hybrid superconductor–insulator–normal-metal junctions. Furthermore, such junctions can also serve as incoherent microwave sources. Importantly, the photon absorption and emission rates can be tuned over several orders of magnitude. In addition, these junctions are used for refrigeration and heating of the normal-metal electrons as well as for probing the electron temperature. Here, we present their operation principle and provide insight to their potential applications as well as briefly describe fabrication methods.

CRC Press eBooks•Apr 22, 2020•0 citations

Quantum-circuit refrigerator

Quantum technology promises revolutionizing applications in information processing, communications, sensing and modelling.However, efficient on-demand cooling of the functional quantum degrees of freedom remains challenging in many solid-state implementations, such as superconducting circuits.Here we demonstrate direct cooling of a superconducting resonator mode using voltage-controllable electron tunnelling in a nanoscale refrigerator.This result is revealed by a decreased electron temperature at a resonator-coupled probe resistor, even for an elevated electron temperature at the refrigerator.Our conclusions are verified by control experiments and by a good quantitative agreement between theory and experimental observations at various operation voltages and bath temperatures.In the future, we aim to remove spurious dissipation introduced by our refrigerator and to decrease the operational temperature.Such an ideal quantum-circuit refrigerator has potential applications in the initialization of quantum electric devices.In the superconducting quantum computer, for example, fast and accurate reset of the quantum memory is needed.

Physics Today•Jun 1, 2017•2 citations

Stabilization of Kerr-cat qubits with quantum circuit refrigerator

Shumpei Masuda, Shunsuke Kamimura, Tsuyoshi Yamamoto +2 more

A periodically driven superconducting nonlinear resonator can implement a Kerr-cat qubit, which provides a promising route to a quantum computer with a long lifetime. However, the system is vulnerable to pure dephasing, which causes unwanted excitations outside the qubit subspace. Therefore, we require a refrigeration technology that confines the system in the qubit subspace. We theoretically study on-chip refrigeration for Kerr-cat qubits based on photon-assisted electron tunneling at tunneling junctions, called quantum circuit refrigerators (QCR). Rates of QCR-induced deexcitations of the system can be changed by more than four orders of magnitude by tuning a bias voltage across the tunneling junctions. Unwanted QCR-induced bit flips are greatly suppressed due to quantum interference in the tunneling process, and thus the long lifetime is preserved. The QCR can serve as a tunable dissipation source that stabilizes Kerr-cat qubits.

arXiv:2406.13957•npj Quantum Information•Feb 15, 2025•2 citations

Flux-tunable heat sink for quantum electric circuits

Matti Partanen, Kuan Yen Tan, Shumpei Masuda +10 more

Abstract Superconducting microwave circuits show great potential for practical quantum technological applications such as quantum information processing. However, fast and on-demand initialization of the quantum degrees of freedom in these devices remains a challenge. Here, we experimentally implement a tunable heat sink that is potentially suitable for the initialization of superconducting qubits. Our device consists of two coupled resonators. The first resonator has a high quality factor and a fixed frequency whereas the second resonator is designed to have a low quality factor and a tunable resonance frequency. We engineer the low quality factor using an on-chip resistor and the frequency tunability using a superconducting quantum interference device. When the two resonators are in resonance, the photons in the high-quality resonator can be efficiently dissipated. We show that the corresponding loaded quality factor can be tuned from above 105 down to a few thousand at 10 GHz in good quantitative agreement with our theoretical model.

arXiv:1712.10256•Scientific Reports•Apr 16, 2018•3 citations
The emerging quantum technological applications call for fast and accurate initialization of the corresponding devices to low-entropy quantum states. To this end, we theoretically study a recently demonstrated quantum-circuit refrigerator in the case of nonlinear quantum electric circuits such as superconducting qubits. The maximum refrigeration rate of transmon and flux qubits is observed to be roughly an order of magnitude higher than that of usual linear resonators, increasing flexibility in the design. We find that for typical experimental parameters, the refrigerator is suitable for resetting different qubit types to fidelities above 99.99% in a few or a few tens of nanoseconds depending on the scenario. Thus the refrigerator appears to be a promising tool for quantum technology and for detailed studies of open quantum systems.
We experimentally demonstrate a recently proposed single-junction quantum-circuit refrigerator (QCR) as an tunable low-temperature environment for a superconducting 4.7 GHz resonator. With the help of a transmon qubit, we measure the populations of the different resonator Fock states, thus providing reliable access to the temperature of the engineered electromagnetic environment and its effect on the resonator. We demonstrate coherent and thermal resonator states and that the on-demand dissipation provided by the QCR can drive these to a small fraction of a photon on average, even if starting above 1 K. We observe that the QCR can be operated either with a dc bias voltage or a gigahertz rf drive, or a combination of these. The bandwidth of the rf drive is not limited by the circuit itself and consequently, we show that 2.9 GHz continuous and 10 ns pulsed drives lead to identical desired refrigeration of the resonator. These observations answer to the shortcomings of previous works where the Fock states were not resolvable and the QCR exhibited slow charging dynamics. Thus, this work introduces a versatile tool to study open quantum systems, quantum thermodynamics, and to quickly reset superconducting qubits. Published by the American Physical Society 2024
Quantum technology promises revolutionizing applications in information processing, communications, sensing and modelling. However, efficient on-demand cooling of the functional quantum degrees of freedom remains challenging in many solid-state implementations, such as superconducting circuits. Here we demonstrate direct cooling of a superconducting resonator mode using voltage-controllable electron tunnelling in a nanoscale refrigerator. This result is revealed by a decreased electron temperature at a resonator-coupled probe resistor, even for an elevated electron temperature at the refrigerator. Our conclusions are verified by control experiments and by a good quantitative agreement between theory and experimental observations at various operation voltages and bath temperatures. In the future, we aim to remove spurious dissipation introduced by our refrigerator and to decrease the operational temperature. Such an ideal quantum-circuit refrigerator has potential applications in the initialization of quantum electric devices. In the superconducting quantum computer, for example, fast and accurate reset of the quantum memory is needed.
Superconducting microwave circuits are promising candidates for a variety of different applications, ranging from extremely sensitive photon detectors to large-scale quantum computer. Thus, they may revolutionize our everyday lives in the future through substantial technological development. Superconducting quantum circuits typically operate at low power levels and consist of linear and nonlinear resonators. In order to enhance their operation fidelity, they need to be cooled efficiently, and the dissipation of the circuit needs to be well engineered. In this chapter, we describe a refrigerator for electric quantum circuits based on photon-assisted electron tunneling in hybrid superconductor–insulator–normal-metal junctions. Furthermore, such junctions can also serve as incoherent microwave sources. Importantly, the photon absorption and emission rates can be tuned over several orders of magnitude. In addition, these junctions are used for refrigeration and heating of the normal-metal electrons as well as for probing the electron temperature. Here, we present their operation principle and provide insight to their potential applications as well as briefly describe fabrication methods.
Quantum technology promises revolutionizing applications in information processing, communications, sensing and modelling.However, efficient on-demand cooling of the functional quantum degrees of freedom remains challenging in many solid-state implementations, such as superconducting circuits.Here we demonstrate direct cooling of a superconducting resonator mode using voltage-controllable electron tunnelling in a nanoscale refrigerator.This result is revealed by a decreased electron temperature at a resonator-coupled probe resistor, even for an elevated electron temperature at the refrigerator.Our conclusions are verified by control experiments and by a good quantitative agreement between theory and experimental observations at various operation voltages and bath temperatures.In the future, we aim to remove spurious dissipation introduced by our refrigerator and to decrease the operational temperature.Such an ideal quantum-circuit refrigerator has potential applications in the initialization of quantum electric devices.In the superconducting quantum computer, for example, fast and accurate reset of the quantum memory is needed.
A periodically driven superconducting nonlinear resonator can implement a Kerr-cat qubit, which provides a promising route to a quantum computer with a long lifetime. However, the system is vulnerable to pure dephasing, which causes unwanted excitations outside the qubit subspace. Therefore, we require a refrigeration technology that confines the system in the qubit subspace. We theoretically study on-chip refrigeration for Kerr-cat qubits based on photon-assisted electron tunneling at tunneling junctions, called quantum circuit refrigerators (QCR). Rates of QCR-induced deexcitations of the system can be changed by more than four orders of magnitude by tuning a bias voltage across the tunneling junctions. Unwanted QCR-induced bit flips are greatly suppressed due to quantum interference in the tunneling process, and thus the long lifetime is preserved. The QCR can serve as a tunable dissipation source that stabilizes Kerr-cat qubits.
Abstract Superconducting microwave circuits show great potential for practical quantum technological applications such as quantum information processing. However, fast and on-demand initialization of the quantum degrees of freedom in these devices remains a challenge. Here, we experimentally implement a tunable heat sink that is potentially suitable for the initialization of superconducting qubits. Our device consists of two coupled resonators. The first resonator has a high quality factor and a fixed frequency whereas the second resonator is designed to have a low quality factor and a tunable resonance frequency. We engineer the low quality factor using an on-chip resistor and the frequency tunability using a superconducting quantum interference device. When the two resonators are in resonance, the photons in the high-quality resonator can be efficiently dissipated. We show that the corresponding loaded quality factor can be tuned from above 105 down to a few thousand at 10 GHz in good quantitative agreement with our theoretical model.