Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1912.12649 · Physical Review A

Efficient production of a narrow-line erbium magneto-optical trap with two-stage slowing

Bojeong Seo, Peng Chen, Ziting Chen, Weijun Yuan, Mingchen Huang, Shengwang Du, Gyu-Boong Jo

Published Jul 17, 2020• 29 citations
arXivHTMLPDF

Abstract

We describe an experimental setup for producing a large cold erbium (Er) sample in a narrow-line magneto-optical trap (MOT) in a simple and efficient way. We implement a pair of angled slowing beams with respect to the Zeeman slower axis, and further slow down atoms exiting from the Zeeman slower. The second-stage slowing beams enable the narrow-line MOT to trap atoms exiting from the Zeeman slower with higher velocity. This scheme is particularly useful when the Zeeman slower is at low optical power without the conventional transverse cooling between an oven and a Zeeman slower, in which case we significantly improve the loading efficiency into the MOT and are able to trap more than ${10}^{8}$ atoms in the narrow-line MOT of $^{166}\mathrm{Er}$. This work highlights our implementation, which greatly simplifies laser cooling and trapping of Er atoms and also should benefit other similar elements.

DOI
10.1103/physreva.102.013319

Related papers

Two-dimensional magneto-optical trap of dysprosium atoms as a compact source for efficient loading of a narrow-line three-dimensional magneto-optical trap

Shu‐Wei Jin, Jianshun Gao, Karthik Chandrashekara +3 more

We report on a scheme for loading dysprosium atoms into a narrow-line three-dimensional magneto-optical trap (3D MOT). Our approach replaces the conventional Zeeman slower with a two-dimensional (2D) MOT operating on the broad 421-nm line to create a high-flux beam of slow atoms. Even in the absence of a push beam, we demonstrate efficient loading of the 3D MOT, which operates on the narrower 626-nm intercombination line. Adding push beams working at either 421 nm or 626 nm, significant enhancement of the loading rate is achieved. We reach the best performance, with an enhancement factor of 3.6, using a push beam red-detuned to the 626-nm line. With loading rates greater than ${10}^{8}\phantom{\rule{0.16em}{0ex}}\text{atoms/s}$ achieved at a moderate oven reservoir temperature of ${800}^{\ensuremath{\circ}}\phantom{\rule{0.16em}{0ex}}\mathrm{C}$, our method offers similar or greater performance than Zeeman-slower-based systems. Our 2D-MOT-based approach constitutes a promising first step towards state-of-the-art quantum gas experiments with several advantages over the Zeeman-slower-based setup and is readily adaptable to other open-shell lanthanides.

arXiv:2303.05191•Physical Review A•Aug 18, 2023•16 citations

Narrow-line magneto-optical trap for erbium

Albert Frisch, K. Aikawa, Manfred J. Mark +5 more

We report on the experimental realization of a robust and efficient magneto-optical trap for erbium atoms, based on a narrow cooling transition at 583 nm. We observe up to $N=2\ifmmode\times\else\texttimes\fi{}{10}^{8}$ atoms at a temperature of about $T=15$ $\ensuremath{\mu}$K. This simple scheme provides better starting conditions for direct loading of dipole traps as compared to approaches based on the strong cooling transition alone, or on a combination of a strong and a narrow kHz transition. Our results on Er point to a general, simple, and efficient approach to laser cool samples of other lanthanide atoms (Ho, Dy, and Tm) for the production of quantum-degenerate samples.

arXiv:1203.1460•Physical Review A•May 7, 2012•105 citations

Enhancing the capture velocity of a Dy magneto-optical trap with two-stage slowing

William D. M. Lunden, Li Du, Michael Cantara +3 more

Magneto-optical traps (MOTs) based on the 626-nm, 136-kHz-wide intercombination line of Dy, which has an attractively low Doppler temperature of $3.3\phantom{\rule{0.28em}{0ex}}\ensuremath{\mu}\mathrm{K}$, have been implemented in a growing number of experiments over the last several years. A challenge in loading these MOTs comes from their low capture velocities. Slowed atomic beams can spread out significantly during free flight from the Zeeman slower to the MOT position, reducing the fraction of the beam captured by the MOT. Here we apply a scheme for enhancing the loading rate of the MOT wherein atoms are Zeeman slowed to a final velocity larger than the MOT's capture velocity and then undergo a final stage of slowing by a pair of near-detuned beams addressing the 421-nm transition directly in front of the MOT. By reducing the free-flight time of the Zeeman-slowed atomic beam, we greatly enhance the slowed flux delivered to the MOT, leading to more than an order-of-magnitude enhancement in the final MOT population.

arXiv:1908.10433•Physical Review A•Jun 12, 2020•30 citations

Loading of the narrow line Tm MOT from a pulsed cold atomic beam

M. O. Yaushev, D. Mishin, Dmitry O. Tregubov +2 more

We report on building a pulsed source of cold Tm atoms and loading of the narrow-line magneto-optical trap (MOT) from the cold atomic beam. We achieve the loading rate of the first-stage MOT in the primary chamber up to 108 atoms/s and obtain a cold atomic beam with the mean longitudinal velocity ∼10 m/s and an angular spread of 18 mrad in a pulsed mode. In this regime, we can form a cold atomic beam with up to 5 × 106 atoms at a 5 Hz repetition rate. We also introduce a novel method to enhance the capture velocity of the narrow-line MOT by incorporating an additional axial cooling beam and achieve loading efficiency η = 10% of the second-stage MOT in the science chamber. Our approach could be extended to other atomic species with similar properties, such as Sr, Yb, Dy, and Er, serving as a convenient alternative for the traditional 2D-MOT schemes. Providing rapid loading of the MOT in the science chamber, it would reduce preparation time of the atomic ensemble leading to a shorter dead time in spectroscopy experiments and a higher repetition rate.

arXiv:2411.08807•Review of Scientific Instruments•Mar 1, 2025•3 citations

Narrow-line magneto-optical trap for dysprosium atoms

T. Maier, H. Kadau, M. Schmitt +2 more

We present our technique to create a magneto-optical trap (MOT) for dysprosium atoms using the narrow-line cooling transition at 626 nm to achieve suitable conditions for direct loading into an optical dipole trap. The MOT is loaded from an atomic beam via a Zeeman slower using the strongest atomic transition at 421 nm. With this combination of two cooling transitions we can trap up to 2.0·10(8) atoms at temperatures down to 6 μK. This cooling approach is simpler than present work with ultracold dysprosium and provides similar starting conditions for a transfer to an optical dipole trap.

arXiv:1403.1499•Optics Letters•May 16, 2014•58 citations

Loading of a krypton magneto-optical trap with two hollow laser beams in a Zeeman slower

Sunita Singh, Vibhuti Bhushan Tiwari, Satya Ram Mishra +1 more

A significant enhancement in the number of cold atoms in an atomic-beam-loaded magneto-optical trap (MOT) for metastable krypton atoms is observed when hollow laser beams are used in a Zeeman slower instead of a Gaussian laser beam. In the Zeeman slower setup, a combination of two hollow laser beams, i.e., a variable-diameter hollow beam generated using a pair of axicon lenses superimposed on a fixed-diameter hollow beam, has been used to reduce the longitudinal velocity of the atoms in the atomic beam below the capture speed of the MOT. The observed enhancement in the number of atoms in the MOT is attributed to reduced destruction of the atom cloud in the MOT and increased cooling of the off-axis atoms in the atomic beam, resulting from the use of hollow beams in the Zeeman slower.

Journal of Experimental and Theoretical Physics•Sep 1, 2014•2 citations
We describe an experimental setup for producing a large cold erbium (Er) sample in a narrow-line magneto-optical trap (MOT) in a simple and efficient way. We implement a pair of angled slowing beams with respect to the Zeeman slower axis, and further slow down atoms exiting from the Zeeman slower. The second-stage slowing beams enable the narrow-line MOT to trap atoms exiting from the Zeeman slower with higher velocity. This scheme is particularly useful when the Zeeman slower is at low optical power without the conventional transverse cooling between an oven and a Zeeman slower, in which case we significantly improve the loading efficiency into the MOT and are able to trap more than 108{10}^{8}108 atoms in the narrow-line MOT of 166Er^{166}\mathrm{Er}166Er. This work highlights our implementation, which greatly simplifies laser cooling and trapping of Er atoms and also should benefit other similar elements.
We report on a scheme for loading dysprosium atoms into a narrow-line three-dimensional magneto-optical trap (3D MOT). Our approach replaces the conventional Zeeman slower with a two-dimensional (2D) MOT operating on the broad 421-nm line to create a high-flux beam of slow atoms. Even in the absence of a push beam, we demonstrate efficient loading of the 3D MOT, which operates on the narrower 626-nm intercombination line. Adding push beams working at either 421 nm or 626 nm, significant enhancement of the loading rate is achieved. We reach the best performance, with an enhancement factor of 3.6, using a push beam red-detuned to the 626-nm line. With loading rates greater than 108atoms/s{10}^{8}\phantom{\rule{0.16em}{0ex}}\text{atoms/s}108atoms/s achieved at a moderate oven reservoir temperature of ${800}^{\ensuremath{\circ}}\phantom{\rule{0.16em}{0ex}}\mathrm{C}$, our method offers similar or greater performance than Zeeman-slower-based systems. Our 2D-MOT-based approach constitutes a promising first step towards state-of-the-art quantum gas experiments with several advantages over the Zeeman-slower-based setup and is readily adaptable to other open-shell lanthanides.
We report on the experimental realization of a robust and efficient magneto-optical trap for erbium atoms, based on a narrow cooling transition at 583 nm. We observe up to $N=2\ifmmode\times\else\texttimes\fi{}{10}^{8}$ atoms at a temperature of about T=15T=15T=15 $\ensuremath{\mu}$K. This simple scheme provides better starting conditions for direct loading of dipole traps as compared to approaches based on the strong cooling transition alone, or on a combination of a strong and a narrow kHz transition. Our results on Er point to a general, simple, and efficient approach to laser cool samples of other lanthanide atoms (Ho, Dy, and Tm) for the production of quantum-degenerate samples.
Magneto-optical traps (MOTs) based on the 626-nm, 136-kHz-wide intercombination line of Dy, which has an attractively low Doppler temperature of $3.3\phantom{\rule{0.28em}{0ex}}\ensuremath{\mu}\mathrm{K}$, have been implemented in a growing number of experiments over the last several years. A challenge in loading these MOTs comes from their low capture velocities. Slowed atomic beams can spread out significantly during free flight from the Zeeman slower to the MOT position, reducing the fraction of the beam captured by the MOT. Here we apply a scheme for enhancing the loading rate of the MOT wherein atoms are Zeeman slowed to a final velocity larger than the MOT's capture velocity and then undergo a final stage of slowing by a pair of near-detuned beams addressing the 421-nm transition directly in front of the MOT. By reducing the free-flight time of the Zeeman-slowed atomic beam, we greatly enhance the slowed flux delivered to the MOT, leading to more than an order-of-magnitude enhancement in the final MOT population.
We report on building a pulsed source of cold Tm atoms and loading of the narrow-line magneto-optical trap (MOT) from the cold atomic beam. We achieve the loading rate of the first-stage MOT in the primary chamber up to 108 atoms/s and obtain a cold atomic beam with the mean longitudinal velocity ∼10 m/s and an angular spread of 18 mrad in a pulsed mode. In this regime, we can form a cold atomic beam with up to 5 × 106 atoms at a 5 Hz repetition rate. We also introduce a novel method to enhance the capture velocity of the narrow-line MOT by incorporating an additional axial cooling beam and achieve loading efficiency η = 10% of the second-stage MOT in the science chamber. Our approach could be extended to other atomic species with similar properties, such as Sr, Yb, Dy, and Er, serving as a convenient alternative for the traditional 2D-MOT schemes. Providing rapid loading of the MOT in the science chamber, it would reduce preparation time of the atomic ensemble leading to a shorter dead time in spectroscopy experiments and a higher repetition rate.
We present our technique to create a magneto-optical trap (MOT) for dysprosium atoms using the narrow-line cooling transition at 626 nm to achieve suitable conditions for direct loading into an optical dipole trap. The MOT is loaded from an atomic beam via a Zeeman slower using the strongest atomic transition at 421 nm. With this combination of two cooling transitions we can trap up to 2.0·10(8) atoms at temperatures down to 6 μK. This cooling approach is simpler than present work with ultracold dysprosium and provides similar starting conditions for a transfer to an optical dipole trap.
A significant enhancement in the number of cold atoms in an atomic-beam-loaded magneto-optical trap (MOT) for metastable krypton atoms is observed when hollow laser beams are used in a Zeeman slower instead of a Gaussian laser beam. In the Zeeman slower setup, a combination of two hollow laser beams, i.e., a variable-diameter hollow beam generated using a pair of axicon lenses superimposed on a fixed-diameter hollow beam, has been used to reduce the longitudinal velocity of the atoms in the atomic beam below the capture speed of the MOT. The observed enhancement in the number of atoms in the MOT is attributed to reduced destruction of the atom cloud in the MOT and increased cooling of the off-axis atoms in the atomic beam, resulting from the use of hollow beams in the Zeeman slower.