Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1403.1499 · Optics Letters

Narrow-line magneto-optical trap for dysprosium atoms

T. Maier, H. Kadau, M. Schmitt, A. Griesmaier, T. Pfau

Published May 16, 2014• 58 citations
arXivHTMLPDF

Abstract

We present our technique to create a magneto-optical trap (MOT) for dysprosium atoms using the narrow-line cooling transition at 626 nm to achieve suitable conditions for direct loading into an optical dipole trap. The MOT is loaded from an atomic beam via a Zeeman slower using the strongest atomic transition at 421 nm. With this combination of two cooling transitions we can trap up to 2.0·10(8) atoms at temperatures down to 6 μK. This cooling approach is simpler than present work with ultracold dysprosium and provides similar starting conditions for a transfer to an optical dipole trap.

DOI
10.1364/ol.39.003138

Related papers

Narrow-line magneto-optical trap for dysprosium atoms

Thomas Maier, Holger Kadau, M. Schmitt +2 more

We present our technique to create a magneto-optical trap for dysprosium atoms using the narrow-line cooling transition at 626$\,$nm to achieve suitable conditions for direct loading into an optical dipole trap. The magneto-optical trap is loaded from an atomic beam via a Zeeman slower using the strongest atomic transition at 421$\,$nm. With this combination of two cooling transitions we can trap up to $2.0\cdot10^8$ atoms at temperatures down to 6$\, \mu$K. This cooling approach is simpler than present work with ultracold dysprosium and provides similar starting conditions for a transfer to an optical dipole trap.

•Jan 1, 2014•48 citations

Two-dimensional magneto-optical trap of dysprosium atoms as a compact source for efficient loading of a narrow-line three-dimensional magneto-optical trap

Shu‐Wei Jin, Jianshun Gao, Karthik Chandrashekara +3 more

We report on a scheme for loading dysprosium atoms into a narrow-line three-dimensional magneto-optical trap (3D MOT). Our approach replaces the conventional Zeeman slower with a two-dimensional (2D) MOT operating on the broad 421-nm line to create a high-flux beam of slow atoms. Even in the absence of a push beam, we demonstrate efficient loading of the 3D MOT, which operates on the narrower 626-nm intercombination line. Adding push beams working at either 421 nm or 626 nm, significant enhancement of the loading rate is achieved. We reach the best performance, with an enhancement factor of 3.6, using a push beam red-detuned to the 626-nm line. With loading rates greater than ${10}^{8}\phantom{\rule{0.16em}{0ex}}\text{atoms/s}$ achieved at a moderate oven reservoir temperature of ${800}^{\ensuremath{\circ}}\phantom{\rule{0.16em}{0ex}}\mathrm{C}$, our method offers similar or greater performance than Zeeman-slower-based systems. Our 2D-MOT-based approach constitutes a promising first step towards state-of-the-art quantum gas experiments with several advantages over the Zeeman-slower-based setup and is readily adaptable to other open-shell lanthanides.

arXiv:2303.05191•Physical Review A•Aug 18, 2023•16 citations

Narrow-line magneto-optical trap for erbium

Albert Frisch, K. Aikawa, Manfred J. Mark +5 more

We report on the experimental realization of a robust and efficient magneto-optical trap for erbium atoms, based on a narrow cooling transition at 583 nm. We observe up to $N=2\ifmmode\times\else\texttimes\fi{}{10}^{8}$ atoms at a temperature of about $T=15$ $\ensuremath{\mu}$K. This simple scheme provides better starting conditions for direct loading of dipole traps as compared to approaches based on the strong cooling transition alone, or on a combination of a strong and a narrow kHz transition. Our results on Er point to a general, simple, and efficient approach to laser cool samples of other lanthanide atoms (Ho, Dy, and Tm) for the production of quantum-degenerate samples.

arXiv:1203.1460•Physical Review A•May 7, 2012•105 citations

Trapping Dysprosium in a Magnetic Optical Trap Directly from a Thermal Beam

Liam Domett-Potts

Dysprosium is the most magnetic element on the periodic table, which gives it the potential to display exotic physics. To study magnetic interacting atoms, we plan to capture single atoms of Dysprosium in optical tweezers, as done with Rubidium atoms in [1]. The first step is a 3D magneto-optical trap (MOT), which combines the optical molasses technique [2] and spatial-dependent Zeeman splitting [3] to trap a cloud of Dysprosium atoms. The MOT is inside an ultra-high vacuum (UHV) chamber and an effusion cell produces a hot beam of Dysprosium atoms, from which it loads. An amplified external cavity diode laser, locked to an optical reference cavity, generates the 421 nm light that forms the optical molasses. Water-cooled coils in a quadrupole configuration generate the magnetic fields. Our experiment is the first to load the MOT directly in the hot beam, prioritising simplicity over a large MOT population by going without a 2D MOT or Zeeman slower, used in [4] and [5]. This thesis presents our design and implementation of the simple Dysprosium MOT, shown in Fig. 1. We also show the characteristics of the MOT and atomic source. The simplification of the Dysprosium MOT is twofold: it does not require frequency doubling setups to generate the laser light [5,6] and the aforementioned pre-cooling stages [5,7]. Simplifying this process allows more laboratories worldwide to implement Dysprosium trapping and further our understanding of its exotic physics.

•Jan 24, 2025•0 citations

Spectroscopy of a narrow-line laser-cooling transition in atomic dysprosium

Mingwu Lu, Seo Ho Youn, Benjamin Lev

The laser cooling and trapping of ultracold neutral dysprosium has been demonstrated recently using the broad, open, 421-nm cycling transition. Narrow-line magneto-optical trapping of Dy on longer wavelength transitions would enable the preparation of ultracold Dy samples suitable for loading optical dipole traps and subsequent evaporative cooling. We have identified the closed 741-nm cycling transition as a candidate for the narrow-line cooling of Dy. We present experimental data on the isotope shifts, the hyperfine constants $A$ and $B$, and the decay rate of the 741-nm transition. In addition, we report a measurement of the 421-nm transition's linewidth, which agrees with previous measurements. We summarize the laser-cooling characteristics of these transitions as well as other narrow cycling transitions that may prove useful for cooling Dy.

arXiv:1009.2962•Physical Review A•Jan 18, 2011•58 citations

Efficient production of a narrow-line erbium magneto-optical trap with two-stage slowing

Bojeong Seo, Peng Chen, Ziting Chen +4 more

We describe an experimental setup for producing a large cold erbium (Er) sample in a narrow-line magneto-optical trap (MOT) in a simple and efficient way. We implement a pair of angled slowing beams with respect to the Zeeman slower axis, and further slow down atoms exiting from the Zeeman slower. The second-stage slowing beams enable the narrow-line MOT to trap atoms exiting from the Zeeman slower with higher velocity. This scheme is particularly useful when the Zeeman slower is at low optical power without the conventional transverse cooling between an oven and a Zeeman slower, in which case we significantly improve the loading efficiency into the MOT and are able to trap more than ${10}^{8}$ atoms in the narrow-line MOT of $^{166}\mathrm{Er}$. This work highlights our implementation, which greatly simplifies laser cooling and trapping of Er atoms and also should benefit other similar elements.

arXiv:1912.12649•Physical Review A•Jul 17, 2020•29 citations
We present our technique to create a magneto-optical trap (MOT) for dysprosium atoms using the narrow-line cooling transition at 626 nm to achieve suitable conditions for direct loading into an optical dipole trap. The MOT is loaded from an atomic beam via a Zeeman slower using the strongest atomic transition at 421 nm. With this combination of two cooling transitions we can trap up to 2.0·10(8) atoms at temperatures down to 6 μK. This cooling approach is simpler than present work with ultracold dysprosium and provides similar starting conditions for a transfer to an optical dipole trap.
We present our technique to create a magneto-optical trap for dysprosium atoms using the narrow-line cooling transition at 626 \,nm to achieve suitable conditions for direct loading into an optical dipole trap. The magneto-optical trap is loaded from an atomic beam via a Zeeman slower using the strongest atomic transition at 421 \,nm. With this combination of two cooling transitions we can trap up to 2.0⋅1082.0\cdot10^82.0⋅108 atoms at temperatures down to 6 μ\, \muμK. This cooling approach is simpler than present work with ultracold dysprosium and provides similar starting conditions for a transfer to an optical dipole trap.
We report on a scheme for loading dysprosium atoms into a narrow-line three-dimensional magneto-optical trap (3D MOT). Our approach replaces the conventional Zeeman slower with a two-dimensional (2D) MOT operating on the broad 421-nm line to create a high-flux beam of slow atoms. Even in the absence of a push beam, we demonstrate efficient loading of the 3D MOT, which operates on the narrower 626-nm intercombination line. Adding push beams working at either 421 nm or 626 nm, significant enhancement of the loading rate is achieved. We reach the best performance, with an enhancement factor of 3.6, using a push beam red-detuned to the 626-nm line. With loading rates greater than 108atoms/s{10}^{8}\phantom{\rule{0.16em}{0ex}}\text{atoms/s}108atoms/s achieved at a moderate oven reservoir temperature of ${800}^{\ensuremath{\circ}}\phantom{\rule{0.16em}{0ex}}\mathrm{C}$, our method offers similar or greater performance than Zeeman-slower-based systems. Our 2D-MOT-based approach constitutes a promising first step towards state-of-the-art quantum gas experiments with several advantages over the Zeeman-slower-based setup and is readily adaptable to other open-shell lanthanides.
We report on the experimental realization of a robust and efficient magneto-optical trap for erbium atoms, based on a narrow cooling transition at 583 nm. We observe up to $N=2\ifmmode\times\else\texttimes\fi{}{10}^{8}$ atoms at a temperature of about T=15T=15T=15 $\ensuremath{\mu}$K. This simple scheme provides better starting conditions for direct loading of dipole traps as compared to approaches based on the strong cooling transition alone, or on a combination of a strong and a narrow kHz transition. Our results on Er point to a general, simple, and efficient approach to laser cool samples of other lanthanide atoms (Ho, Dy, and Tm) for the production of quantum-degenerate samples.
Dysprosium is the most magnetic element on the periodic table, which gives it the potential to display exotic physics. To study magnetic interacting atoms, we plan to capture single atoms of Dysprosium in optical tweezers, as done with Rubidium atoms in [1]. The first step is a 3D magneto-optical trap (MOT), which combines the optical molasses technique [2] and spatial-dependent Zeeman splitting [3] to trap a cloud of Dysprosium atoms. The MOT is inside an ultra-high vacuum (UHV) chamber and an effusion cell produces a hot beam of Dysprosium atoms, from which it loads. An amplified external cavity diode laser, locked to an optical reference cavity, generates the 421 nm light that forms the optical molasses. Water-cooled coils in a quadrupole configuration generate the magnetic fields. Our experiment is the first to load the MOT directly in the hot beam, prioritising simplicity over a large MOT population by going without a 2D MOT or Zeeman slower, used in [4] and [5]. This thesis presents our design and implementation of the simple Dysprosium MOT, shown in Fig. 1. We also show the characteristics of the MOT and atomic source. The simplification of the Dysprosium MOT is twofold: it does not require frequency doubling setups to generate the laser light [5,6] and the aforementioned pre-cooling stages [5,7]. Simplifying this process allows more laboratories worldwide to implement Dysprosium trapping and further our understanding of its exotic physics.
The laser cooling and trapping of ultracold neutral dysprosium has been demonstrated recently using the broad, open, 421-nm cycling transition. Narrow-line magneto-optical trapping of Dy on longer wavelength transitions would enable the preparation of ultracold Dy samples suitable for loading optical dipole traps and subsequent evaporative cooling. We have identified the closed 741-nm cycling transition as a candidate for the narrow-line cooling of Dy. We present experimental data on the isotope shifts, the hyperfine constants AAA and BBB, and the decay rate of the 741-nm transition. In addition, we report a measurement of the 421-nm transition's linewidth, which agrees with previous measurements. We summarize the laser-cooling characteristics of these transitions as well as other narrow cycling transitions that may prove useful for cooling Dy.
We describe an experimental setup for producing a large cold erbium (Er) sample in a narrow-line magneto-optical trap (MOT) in a simple and efficient way. We implement a pair of angled slowing beams with respect to the Zeeman slower axis, and further slow down atoms exiting from the Zeeman slower. The second-stage slowing beams enable the narrow-line MOT to trap atoms exiting from the Zeeman slower with higher velocity. This scheme is particularly useful when the Zeeman slower is at low optical power without the conventional transverse cooling between an oven and a Zeeman slower, in which case we significantly improve the loading efficiency into the MOT and are able to trap more than 108{10}^{8}108 atoms in the narrow-line MOT of 166Er^{166}\mathrm{Er}166Er. This work highlights our implementation, which greatly simplifies laser cooling and trapping of Er atoms and also should benefit other similar elements.