Directional transport is obtained in various multimode systems by driving multiple, nonreciprocally interfering interactions between individual bosonic modes. However, systems sustaining the required number of modes become physically complex. In our microwave-optomechanical experiment, we show how to configure nonreciprocal transport between frequency components of a single superconducting cavity coupled to two drumhead oscillators. The frequency components are promoted to Floquet modes and generate the missing dimension to realize an isolator and a directional amplifier. A second cavity left free by this arrangement is used to cool the mechanical oscillators and bring the transduction noise close to the quantum limit. We furthermore uncover a new type of instability specific to nonreciprocal coupling. Our approach is generic and can greatly simplify quantum signal processing and the design of topological lattices from low-dimensional systems.
Directional transport is obtained in various multimode systems by driving multiple, nonreciprocally interfering interactions between individual bosonic modes. However, systems sustaining the required number of modes become physically complex. In our microwave-optomechanical experiment, we show how to configure nonreciprocal transport between frequency components of a single superconducting cavity coupled to two drumhead oscillators. The frequency components are promoted to Floquet modes and generate the missing dimension to realize an isolator and a directional amplifier. A second cavity left free by this arrangement is used to cool the mechanical oscillators and bring the transduction noise close to the quantum limit. We furthermore uncover a new type of instability specific to nonreciprocal coupling. Our approach is generic and can greatly simplify quantum signal processing and the design of topological lattices from low-dimensional systems.
Harmonic oscillators might be one of the most fundamental entities described by physics. Yet they stay relevant in recent research. The topological properties associated with exceptional points that can occur when two modes interact have generated much interest in recent years. Harmonic oscillators are also at the heart of new quantum technological applications: the long lifetime of high-Q resonators make them advantageous as quantum memories, and they are employed for narrowband processing of quantum signals, as in Josephson parametric amplifiers. The goal of this thesis is to explore different fundamental regimes of two coupled harmonic oscillators using cavity optomechanics as the experimen- tal platform. With consistent progress in attaining ever increasing Q factors, mechanical and electromagnetic resonators realize near-ideal harmonic oscillators. By parametrically modulating the nonlinear optomechanical interaction between them, an effective linear coupling is achieved, which is tunable in strength and in the relative frequencies of the two modes. Thus cavity optomechanics provides a framework with excellent control over system parameters for the study of two coupled harmonic modes. The specific optomechanical implementation employed are superconducting circuits with the vibrating top plate of a capacitor as the mechanical element. Multimode optomechanical circuits are realized, with two microwave modes interacting with one or two mechanical oscillators. The supplementary modes serve either as intermediaries in the relation of the two modes of interest, or as auxiliaries used to control a parameter of the system. Three main experimental results are achieved. First, an auxiliary microwave mode allows the engineering of the effective dissipation rate of a mechanical oscillator. The latter then acts as a reservoir for the main microwave mode with which it interacts. The microwave mode susceptibility can be tuned, resulting in an instability akin to that of a maser and in resonant amplification of incoming microwave signals with an added noise close to the quantum minimum. Second, we study the conditions for a nonreciprocal interaction between two microwave modes, when the information flows in one direction but not in the other. The two modes interact through two mechanical oscillators, leading to frequency conversion between the two cavities. Dissipation in the mechanical modes is essential to the scheme in two ways: it provides a reciprocal phase necessary for the interference and eliminates the unwanted signals. Third, level attraction between a microwave and a mechanical mode is demonstrated, where the eigenfrequencies of the system are drawn closer as the result of interaction, rather distancing themselves as in the more usual case of level repulsion. The phenomenon is theoretically connected to exceptional points, and a general classification of the possible regimes of interaction between two harmonic modes is exposed, including level repulsion and attraction as special cases.
Nonreciprocal devices, such as isolators, are required to protect sensitive superconducting quantum circuits. Growing research has focused on integrated alternatives to the existing bulky ferrite technologies. Here we realize a nonreciprocal isolator with a multimode microwave optomechanical circuit. Two mechanical oscillators mediate frequency conversion between two microwave modes. Relying on dissipation and the phases of the microwaves tones, the signals interfere constructively in one direction and destructively in the other, resulting in a nonreciprocal isolator. We show how this scheme can be extended to directional amplification and to a circulator, if an additional microwave mode is introduced.
We theoretically propose a scheme of the nonreciprocal conversion device between photons of two arbitrary frequencies in a hybrid cavity optomechanical system, where two optical cavities and two microwave cavities are coupled to two different mechanical resonators via radiation pressure. Two mechanical resonators are coupled together via the Coulomb interaction. We study the nonreciprocal conversions between both the same and different types of frequency photons. The device is based on multichannel quantum interference to break the time-reversal symmetry. Our results show the perfect nonreciprocity conditions. By adjusting the Coulomb interaction and the phase differences, we find that the nonreciprocity can be modulated and even transformed into reciprocity. These results provide new insight into the design of nonreciprocal devices, including isolators, circulators, and routers in quantum information processing and quantum networks.
We demonstrate nonreciprocal optical transmission for both intense classical fields and weak quantum signals within a reconfigurable optomechanical platform driven by three-mode parametric interactions. The platform is modular, where each three-mode optomechanical system serves as a fundamental building block. Operating independently, a single block achieves nonreciprocity for classical fields. Specifically, asymmetric radiation pressure from intrinsic optomechanical nonlinearity induces nonreciprocal mechanical displacement, modulating the cavity intensity through optomechanical feedback. This enables full isolation of backward transmission without requiring parameter initialization. Alternatively, for quantum signals, the platform is reconfigured by activating photonic and phononic exchange channels between the two blocks. In this configuration, nonreciprocity arises from quantum interference between direct photon hopping and indirect conversion pathways. Constructive interference enables unidirectional low-loss transmission, while destructive interference completely suppresses the reverse direction. After adiabatically eliminating the auxiliary modes, the optimal nonreciprocal frequency and the trade-off between insertion loss and nonreciprocal bandwidth can be controlled by engineering optomechanically induced mechanical dissipation. Additionally, the three-mode-based device requires less control-field power than two-mode systems under resolved-sideband conditions, demonstrating versatile potential for optical nonreciprocity applications across classical and quantum domains.
We study a spinning optomechanical cavity that is coupled to a meandering waveguide at multiple spatially separated points, forming a giant-cavity configuration. The resulting self-interference makes the effective optical driving, linewidth, and frequency shift strongly dependent on the propagation phase in the waveguide, while the rotation-induced Sagnac-Fizeau shift causes the clockwise (CW) and counterclockwise (CCW) cavity modes to experience distinct interference phases. Under single-tone driving, this mechanism enables phase-controlled phonon cooling and, in the presence of cavity rotation, nonreciprocal cooling, with one propagation direction approaching the mechanical ground-state regime while the opposite direction remains less efficiently cooled. Under two-tone driving, the same interference mechanism engineers a squeezed reservoir for the mechanical mode, producing steady-state squeezing that likewise becomes nonreciprocal under cavity rotation. These results establish multi-point self-interference as a versatile mechanism for phase-controlled optomechanical reservoir engineering and show that, when combined with cavity rotation, it provides a route to nonreciprocal quantum effects.
Nonreciprocal systems breaking time-reversal symmetry are essential tools in modern quantum technologies enabling the suppression of unwanted reflected signals or extraneous noise entering through detection ports. Here we propose a scheme enabling nonreciprocal conversion between optical and radio-frequency (rf) photons using exclusively optomechanical and electromechanical interactions. The nonreciprocal transmission is obtained by interference of two dissipative pathways of transmission between the two electromagnetic modes established through two distinct intermediate mechanical modes. In our protocol, we apply a bichromatic drive to the cavity mode and a single-tone drive to the rf resonator, and use the relative phase between the drive tones to obtain nonreciprocity. We show that perfect nonreciprocal transduction can be obtained in the limit of large cooperativity in both directions, from optical to rf and vice versa. We also study the transducer noise and show that mechanical thermal noise is always reflected back onto the isolated port. In the limit of large cooperativity, the input noise is instead transmitted in an unaltered way in the allowed direction; in particular one has only vacuum noise in the output rf port in the case of optical-to-rf conversion.