Abstract We present programmable two-dimensional arrays of microscopic atomic ensembles consisting of more than 400 sites with nearly uniform filling and small atom number fluctuations. Our approach involves direct projection of light patterns from a digital micromirror device with high spatial resolution onto an optical pancake trap acting as a reservoir. This makes it possible to load large arrays of tweezers in a single step with high occupation numbers and low power requirements per tweezer. Each atomic ensemble is confined to ~1 μm3 with a controllable occupation from 20 to 200 atoms and with (sub)-Poissonian atom number fluctuations. Thus, they are ideally suited for quantum simulation and for realizing large arrays of collectively encoded Rydberg-atom qubits for quantum information processing.
Abstract We present programmable two-dimensional arrays of microscopic atomic ensembles consisting of more than 400 sites with nearly uniform filling and small atom number fluctuations. Our approach involves direct projection of light patterns from a digital micromirror device with high spatial resolution onto an optical pancake trap acting as a reservoir. This makes it possible to load large arrays of tweezers in a single step with high occupation numbers and low power requirements per tweezer. Each atomic ensemble is confined to ~1 μm3 with a controllable occupation from 20 to 200 atoms and with (sub)-Poissonian atom number fluctuations. Thus, they are ideally suited for quantum simulation and for realizing large arrays of collectively encoded Rydberg-atom qubits for quantum information processing.
Ultracold atoms confined in microtrap array is a highly versatile platform for quantum many-body physics, quantum simulation and quantum computation because of the easy scalability, long coherence time, single site addressability and controllable interactions, e.g. using Rydberg states. Here, we demonstrate an novel method to prepare versatile arrays of atomic ensembles by transferring them from a pancake shaped optical reservoir to an array of optical tweezers produced via direct projection of light patterns produced via a digital micromirror device. The size of each ensemble is smaller than the Rydberg blockade radius, such that each one can carry either 0 or 1 (collective) excitations which can then strongly interact with the neighbouring ensembles. Finally I will discuss a recent proposal to use such Rydberg arrays to realise programmable quantum systems in the form of quantum cellular automata (QCA). This opens a path to study many-body quantum dynamics in quantum and classical regimes, to engineer highly entangled quantum states and toward an inherently scalable approach to quantum information processing and computing.
Low-entropy arrays of atomic quantum systems in optical tweezers offer unique prospects for fundamental research on few- and many-body systems as well as for extended applications in quantum technology. The significance of this approach relies on the achievable system size, its uniformity, and the rate of qubit allocation. We propel the neutral-atom quantum-technology platform by the rapid assembly of a regular two-dimensional quantum register of up to 1024 atomic qubits, enabled by a novel implementation of intensity-homogenized tweezer arrays and parallelized atom transport. Our highly efficient microoptical architecture modularizes intensity equalization and tweezer patterning in separate functional units, eliminating restrictions that arise for high-power, high-resolution, and large-scale light-field control within a single device. Arrays of precise grid structure, trap depth, and vibrational frequency with more than 3500 sites are demonstrated. Individual sites are interconnected by up to 50 parallelized transport tweezers with intensity and position control in real-time for swift qubit relocation. Multi-tweezer transport enables the operation of target patterns of up to 32 x 32 sites with sustained near-unity filling fraction. These results boost neutral-atom quantum information science above the kiloqubit level.
Abstract A great challenge in current quantum science and technology research is to realize artificial systems of a large number of individually controlled quantum bits for applications in quantum computing and quantum simulation. Many experimental platforms are being explored, including solid-state systems, such as superconducting circuits1 or quantum dots2, and atomic, molecular and optical systems, such as photons, trapped ions or neutral atoms3–7. The latter offer inherently identical qubits that are well decoupled from the environment and could provide synthetic structures scalable to hundreds of qubits or more8. Quantum-gas microscopes9 allow the realization of two-dimensional regular lattices of hundreds of atoms, and large, fully loaded arrays of about 50 microtraps (or ‘optical tweezers’) with individual control are already available in one10 and two11 dimensions. Ultimately, however, accessing the third dimension while keeping single-atom control will be required, both for scaling to large numbers and for extending the range of models amenable to quantum simulation. Here we report the assembly of defect-free, arbitrarily shaped three-dimensional arrays, containing up to 72 single atoms. We use holographic methods and fast, programmable moving tweezers to arrange—atom by atom and plane by plane—initially disordered arrays into target structures of almost any geometry. These results present the prospect of quantum simulation with tens of qubits arbitrarily arranged in space and show that realizing systems of hundreds of individually controlled qubits is within reach using current technology.
Scalability remains a major challenge in building practical fault-tolerant quantum computers. Currently, the largest number of qubits achieved across leading quantum platforms ranges from hundreds to thousands. In atom arrays, scalability is primarily constrained by the capacity to generate large numbers of optical tweezers, and conventional techniques using acousto-optic deflectors or spatial light modulators struggle to produce arrays much beyond ∼10,000 tweezers. Moreover, these methods require additional microscope objectives to focus the light into micrometer-sized spots, which further complicates system integration and scalability. Here, we demonstrate the experimental generation of an optical tweezer array containing 280×280 spots using a metasurface, nearly an order of magnitude more than most existing systems. The metasurface leverages a large number of subwavelength phase-control pixels to engineer the wavefront of the incident light, enabling both large-scale tweezer generation and direct focusing into micron-scale spots without the need for a microscope. This result shifts the scalability bottleneck for atom arrays from the tweezer generation hardware to the available laser power. Furthermore, the array shows excellent intensity uniformity exceeding 90%, making it suitable for homogeneous single-atom loading and paving the way for trapping arrays of more than 10,000 atoms in the near future.
Assembling and maintaining large arrays of individually addressable atoms is a key requirement for continued scaling of neutral-atom-based quantum computers and simulators. In this work, we demonstrate a new paradigm for assembly of atomic arrays, based on a synergistic combination of optical tweezers and cavity-enhanced optical lattices, and the incremental filling of a target array from a repetitively filled reservoir. In this protocol, the tweezers provide microscopic rearrangement of atoms, while the cavity-enhanced lattices enable the creation of large numbers of optical traps with sufficient depth for rapid low-loss imaging of atoms. We apply this protocol to demonstrate near-deterministic filling (99% per-site occupancy) of 1225-site arrays of optical traps. Because the reservoir is repeatedly filled with fresh atoms, the array can be maintained in a filled state indefinitely. We anticipate that this protocol will be compatible with mid-circuit reloading of atoms into a quantum processor, which will be a key capability for running large-scale error-corrected quantum computations whose durations exceed the lifetime of a single atom in the system. Published by the American Physical Society 2024
Abstract Arrays of neutral atoms in optical tweezers are widely used in quantum simulation and computation, and precision frequency metrology. The capabilities of these arrays are enhanced by maximising the number of available sites. Here we increase the spatial extent of a two-dimensional array of 88 Sr atoms by sweeping the frequency of the cooling light to move the atomic reservoir across the array. We load arrays with vertical heights of > 100 µm, exceeding the height of an array loaded from a static reservoir by a factor of > 3. We investigate the site-to-site atom number distribution, tweezer lifetime, and temperature, achieving an average temperature across the array of 1.49 ( 3 ) µK. By controlling the frequency sweep we show it is possible to control the distribution of atoms across the array, including uniform and non-uniformly loaded arrays, and arrays with selectively loaded regions. We explain our results using a rate equation model which is in qualitative agreement with the data.