The authors revisit the conventional transmon or Cooper-pair box circuit by treating both the phase and charge as non-compact variables. The revisited circuit spectrum is found to be arranged in Bloch bands, from which a new scheme to encode superconducting qubits is proposed employing states in the lowest Bloch band. The authors also discuss the robustness of these states against external noise and possible setups for state preparation.
The authors revisit the conventional transmon or Cooper-pair box circuit by treating both the phase and charge as non-compact variables. The revisited circuit spectrum is found to be arranged in Bloch bands, from which a new scheme to encode superconducting qubits is proposed employing states in the lowest Bloch band. The authors also discuss the robustness of these states against external noise and possible setups for state preparation.
Superconducting circuits for quantum information processing are often described theoretically in terms of a discrete charge, or equivalently, a compact phase/flux, at each node in the circuit. Here we revisit the consequences of lifting this assumption for transmon and Cooper-pair box circuits, which are constituted from a Josephson junction and a capacitor, treating both the superconducting phase and charge as noncompact variables. The periodic Josephson potential gives rise to a Bloch band structure, characterized by the Bloch quasicharge. We analyze the possibility of creating superpositions of different quasicharge states by transiently shunting inductive elements across the circuit and suggest a choice of eigenstates in the lowest Bloch band of the spectrum that may support an inherently robust qubit encoding.
Short dephasing times pose one of the main challenges in realizing a quantum computer. Different approaches have been devised to cure this problem for superconducting qubits, a prime example being the operation of such devices at optimal working points, so-called sweet spots. This latter approach led to significant improvement of T2 times in Cooper pair box qubits [D. Vion et al., Science 296, 886 (2002)]. Here, we introduce a new type of superconducting qubit called the transmon. Unlike the charge qubit, the transmon is designed to operate in a regime of significantly increased ratio of Josephson energy and charging energy EJ/EC. The transmon benefits from the fact that its charge dispersion decreases exponentially with EJ/EC, while its loss in anharmonicity is described by a weak power law. As a result, we predict a drastic reduction in sensitivity to charge noise relative to the Cooper pair box and an increase in the qubit-photon coupling, while maintaining sufficient anharmonicity for selective qubit control. Our detailed analysis of the full system shows that this gain is not compromised by increased noise in other known channels.
Abstract The non-dissipative nonlinearity of Josephson junctions1 converts macroscopic superconducting circuits into artificial atoms2, enabling some of the best-controlled qubits today3, 4. Three fundamental types of superconducting qubit are known5, each reflecting a distinct behaviour of quantum fluctuations in a Cooper pair condensate: single-charge tunnelling (charge qubit6, 7), single-flux tunnelling (flux qubit8) and phase oscillations (phase qubit9 or transmon10). Yet, the dual nature of charge and flux suggests that circuit atoms must come in pairs. Here we introduce the missing superconducting qubit, ‘blochnium’, which exploits a coherent insulating response of a single Josephson junction that emerges from the extension of phase fluctuations beyond 2π (refs. 11–14). Evidence for such an effect has been found in out-of-equilibrium direct-current transport through junctions connected to high-impedance leads15–19, although a full consensus on the existence of extended phase fluctuations is so far absent20–22. We shunt a weak junction with an extremely high inductance—the key technological innovation in our experiment—and measure the radiofrequency excitation spectrum as a function of external magnetic flux through the resulting loop. The insulating character of the junction is manifested by the vanishing flux sensitivity of the qubit transition between the ground state and the first excited state, which recovers rapidly for transitions to higher-energy states. The spectrum agrees with a duality mapping of blochnium onto a transmon, which replaces the external flux by the offset charge and introduces a new collective quasicharge variable instead of the superconducting phase23, 24. Our findings may motivate the exploration of macroscopic quantum dynamics in ultrahigh-impedance circuits, with potential applications in quantum computing and metrology.
Artificial atoms realized by superconducting circuits offer unique opportunities to store and process quantum information with high fidelity.Among them, implementations of circuits that harness intrinsic noise protection have been rapidly developed in recent years.These noise-protected devices constitute a new class of qubits in which the computational states are largely decoupled from local noise channels.The main challenges in engineering such systems are simultaneously guarding against both bit-and phase-flip errors, and also ensuring high-fidelity qubit control.Although partial noise protection is possible in superconducting circuits relying on a single quantum degree of freedom, the promise of complete protection can only be fulfilled by implementing multimode or hybrid circuits.This Perspective reviews the theoretical principles at the heart of these new qubits, describes recent experiments, and highlights the potential of robust encoding of quantum information in superconducting qubits.
Superconducting quantum computing is a solid state quantum computing technology based on Josephson junction circuits. It becomes one of the most promising candidates for realizing practical quantum computer/simulator, because of its scalability, easy to coupling and control, compatibility to semiconductor technologies, etc. As the complicated electromagnetic environment in solid state metal and insulator, superconducting quantum bits (qubits) suffered from shot coherence time since its early development. In this review, we described some recently developed superconducting qubit structures, including Transmon/Xmon, Fluxonium and C-shunt flux qubit. Although these new qubit structures have very different circuit parameters and energy scales, they all find their way to effectively suppress environmental noises. As a result, their coherence time were improved significantly. Transmon, a transmission-line shunted plasma oscillation qubit, was now among the most popular structures for building a multi-qubit superconducting quantum circuit. It introduced a relatively large shunt capacitor to remarkably reduce the charge dispersion. Although the non-linearity is also decreased, by operating in a properly chosen EJ/Ec, transmon can greatly reduce the charge noise while only sacrificing a small amount of non-linearity. Xmon can be considered as a modified version of transmon. It is designed and optimized for multi-qubit operation and measurement with separate X/Y and Z control lines for each qubit, and a readout bus (a transmission line or a low-Q bandpass filter) for simultaneous readout of all the qubits. Fluxonium provide another solution for suppressing the charge noise in Cooper-pair box (CPB). It introduces a large shunt inductance to filter low-frequency offset charge in the small capacitor of the phase-slip junction (the small junction). To keep the qubit operating in the charge region, the shunt inductor should be large enough to keep the impedance larger than the superconducting impedance quantum RQ~1 kΩ. As a result, the inductance can only be provided by a large series of Josephson junctions. Fluxonium keeps the advantage of high anharmonicity of CPB. In addition, it introduces another degree of freedom: external flux Φext. Quasiparticles (electrons or holes) tunneling at the small junction add coherently to produce a ″1+cosφ″ term. As a result, when Φext= Φ0/2, dissipation caused by quasiparticle tunneling is suppressed and the energy relaxation time (T1) increases drastically. C-shunt flux qubit (CSFQ) decreases α and EJ to suppress flux noise in the qubit. While the charge noise becomes the dominant noise source, a large shunt capacitor is added to suppress the charge noise, similar to that in a transmon qubit. It is worth to notice that in CSFQ, the α decreases to below but near 1/2. As a result, the double-well potential no longer exists. The energy structure become similar to transmon, with the anharmonicity be opposite. CSFQ can get a much improved coherence time, while its anharmonicity can be larger than that of transmon. Those new superconducting qubit structures provide different solutions to improve the coherence time. Although it looks much different in circuit models and parameters, they have ideas in common, and may act as guides to other novel designs with longer coherence time. We can summarize as below. (1) The qubit circuit should be free of small superconducting islands. Charge fluctuation in small islands is a major source of decoherence. As a result, increase the area of the islands, that is, increase the capacitance becomes a straight forward way to suppress the charge noise. In Fluxonium, the small junction is connected with a large series of large junctions that there is also no small islands in the whole loop. (2) Remove superconducting loops in the qubit circuit, or minimize the loop size and loop current to suppress flux noise. (3) Bias the phase difference of the small junction to π, where dissipation caused by quasiparticle tunneling can be suppressed coherently. (4) Decrease the coupling bandwidth of qubit to the environment. In a circuit-QED readout scheme, a high-Q readout resonator that dispersively coupled to the qubit protects the qubit from exposed to the electromagnetic environment of the readout circuit. A ″Purcell filter″ can also be added to suppress such decoherence further. In conclusion, we overviewed some qubit engineering techniques or ideas to improve the coherence time, which is a very important figure for building practical quantum computer/simulator. We hope that someone can combine and optimize these ideas, while interact with developments in materials and micro-fabrication technologies, to develop novel new generation superconducting qubit structures in the near future.
In this work we consider measurements on quantum systems emphasizing\non read-out of superconducting qubits. The qubit is always coupled to an\nenvironment, containing a macroscopic number of degrees of freedom. This\nperturbs the qubit and destroys the phase coherence of the quantum state.\nOne tries to minimize this destructive effect by encoding the quantum information in quantum states which do not couple strongly to the dominant\nnoise sources. It is therefore necessary to design read-out methods that can\ndistinguish these states.\n\nWe focus primarily on the single Cooper-pair box (SCB) charge qubit, whose\nproperties are based on the Josephson effect and Coulumb blockade in superconducting electrical circuits. By encoding the information in the qubit\nenergy eigenstates, it is possible to protect it from the most dangerous decoherence source - charge fluctuations in the environment. We investigate\nthe measurement setup, where the SCB is coupled to a lumped element LCoscillator whose resonance frequency is orders of magnitude smaller than the qubit energy splitting. In this regime the SCB will act as an effective positive or negative capacitance, depending on the quantum state. This quantum capacitance then shifts the oscillator resonance frequency, which can be detected in a homodyne phase measurement.\n\nWe have found that reading out a charge qubit by measuring its quantum\ncapacitance in this manner is quantum limited, independently of the oscillator\nquality factor Q. Moreover, we have found that the low-Q oscillator\nis advantageous for the measurement in two ways: first, such an oscillator\nbetter protects the qubit from thermal dephasing, and, second, it allows to\nincrease the speed of the read-out, making it possible to distinguish the qubit states in a single shot measurement.