Energy exchanges under form of heat is neither the most natural or efficient way to operate an engine in the quantum realm. Recently there have been in the literature several proposals for "quantum measurement engines" where energy is fed into the machine by operations which otherwise would be conducive to quantum measurements on the working substance (henceforth "the system"). In the analysis of the working of these devices, oftentimes it is assumed that the only effect of measurement is to turn the state of the system from whatever prior state to an eigenstate of the measured property, and energy exchanges are determined therefrom. This ignores the intricacies of the quantum measurement process. We propose a simple model of a quantum measurement engine where the measurement process may be analyzed in detail, and therefore energy exchanges, and limitations on their duration, may be traced more fully.
Energy exchanges under form of heat is neither the most natural or efficient way to operate an engine in the quantum realm. Recently there have been in the literature several proposals for "quantum measurement engines" where energy is fed into the machine by operations which otherwise would be conducive to quantum measurements on the working substance (henceforth "the system"). In the analysis of the working of these devices, oftentimes it is assumed that the only effect of measurement is to turn the state of the system from whatever prior state to an eigenstate of the measured property, and energy exchanges are determined therefrom. This ignores the intricacies of the quantum measurement process. We propose a simple model of a quantum measurement engine where the measurement process may be analyzed in detail, and therefore energy exchanges, and limitations on their duration, may be traced more fully.
Quantum measurements are known to affect the state of the measured system. Such a measurement backaction is due to the interaction of the quantum system with the measuring device. When the measured observable and the system's Hamiltonian do not commute, the backaction can lead to a mean energy change of the system. This energy change has been dubbed "quantum heat" and, in association with feedback processes and/or the interaction with thermal bath(s), proves to be a genuinely quantum resource to fuel new kinds quantum engines. We propose such a measurement powered engine exploiting the non-commutativity of local and non-local operations on a bipartite quantum system.We then investigate the origin of the quantum heat. Even if one cannot model the full dynamics of a measurement due to the collapse of the wavefunction, the energetic aspects can still be investigated by modeling the so-called pre-measurement. During this step, the system interacts and gets correlated with a quantum system which can be viewed as a small part of the measuring apparatus and called the quantum meter. Ideally, at the end of this process, the system's reduced state will be fully decohered in the measurement basis, thus corresponding to the averaged collapsed output states given by the measurement postulate. We find that the quantum heat received by the measured system corresponds to the energy necessary to turn off the coupling between the meter and the system. Using generalized definitions of heat and work, we moreover characterize the work and heat nature of these energy exchanges.Tracing the source of this energy one step further, we propose an autonomous description of a measurement. This is done by considering a flying qubit measured by the quantum field of the cavity it crosses. The interaction being position dependent, the kinetic degree of freedom is providing the required energy to switch on and off the interaction between the qubit and the meter field. A full quantum treatment allows us to evaluate the impact of the finite spatial and momentum extension of the qubit wavepacket. Since the kinetic degree of freedom can be affected by the interaction, it does not simply generate a time dependent Hamiltonian for the other degrees of freedom. We find the correction to this ideal dynamic and analyse its consequences on the nature of the energy fluxes. %spread/extension/broadnessTaking the opposite point of view, we compare the measurement cost of a qubit by a field propagating in a waveguide, depending on the initial state of the field. In the context of a circuit quantum electrodynamics setup, we find that thermal and coherent fields induce the same backaction on the qubit given the same energy constraints.The results presented and discussed in this thesis contribute to unravel the mysterious effects and mechanisms due to quantum measurements. Notably, they give an outlook to further analyse quantum measurement-based engines and to understand the energetic resource that measurements cost and constitute at the same time.
A quantum measurement involves energy exchanges between the system to be measured and the measuring apparatus. Some of them involve energy losses, for example because energy is dissipated into the environment or is spent in recording the measurement outcome. Moreover, these processes take time. For this reason, these exchanges must be taken into account in the analysis of a quantum measurement engine, and set limits to its efficiency and power. We propose a quantum engine based on a spin 1/2 particle in a magnetic field and study its limitations due to the quantum nature of the evolution. The coupling with the electromagnetic vacuum is taken into account and plays the role of a measurement apparatus. We fully study its dynamics, work, power, and efficiency.
In a quantum Stirling heat engine, the heat exchanged with two thermal baths is partly utilized for performing work by redistributing the energy levels of the working substance. We analyze the thermodynamics of a quantum Stirling engine operating in finite time. We develop a model in which a time-dependent potential barrier changes the energy-level structure of the working substance. The process takes place under a constant interaction with the thermal bath. We further show that in the limit of slow operation of the cycle and low temperature, the efficiency of such an engine approaches Carnot efficiency. We also show that the maximum output power, for the strokes that affect the energy levels, is obtained at an intermediate operating speed, demonstrating the importance of a finite-time analysis.
Using a very simple Gedankenexperiment, I remind the reader that (contrary to what happens in classical mechanics) the energy of a quantum system is inevitably increased just by performing (some) textbook measurements on it. As a direct conclusion, this means that some measurements require the expenditure of a finite amount of energy to be carried out. I also argue that this makes it very difficult to regard measurements as disembodied, immaterial, informational operations, and it forces us to look at them as physical processes just like any other one.
We propose a thermodynamic cycle similar to the Otto cycle with a two-qubit working substance such that one of its isochoric strokes is provided by a controllable quantum measurement. We show that the measurement device can affect the working substance in four possible ways, as well as the energy exchanges between the working substance and an external work source during the isentropic strokes take place in two possible ways. By these considerations, we obtain eight thermal machines, each of which works individually in engine, accelerator, or refrigerator modes. We show that, for half of the obtained thermal machines, the applied quantum measurement causes their respective performances to go higher than the corresponding regular Otto limits, while the remainder go lower than the mentioned limits. Interestingly, it is shown that the performance of each thermal machine explicitly depends on the strength parameters of applied measurement, which in turn are related to coupling constants of the working substance and measurement device. These findings highlight that the role of generalized measurements as nonequilibrium quantum resources is not always constructive in powering the thermal machines.
Established heat engines in quantum regime can be modeled with various quantum systems as working substances. For example, in the non-relativistic case, we can model the heat engine using infinite potential well as a working substance to evaluate the efficiency and work done of the engine. Here, we propose quantum heat engine with a relativistic particle confined in the one-dimensional potential well as working substance. The cycle comprises of two isothermal processes and two potential well processes of equal width, which forms the quantum counterpart of the known isochoric process in classical nature. For a concrete interpretation about the relation between the quantum observables with the physically measurable parameters (like the efficiency and work done), we develop a link between the thermodynamic variables and the uncertainty relation. We have used this model to explore the work extraction and the efficiency of the heat engine for a relativistic case from the standpoint of uncertainty relation, where the incompatible observables are the position and the momentum operators. We are able to determine the bounds (the upper and the lower bounds) of the efficiency of the heat engine through the thermal uncertainty relation.