Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1909.08055 · Applied Optics

First industrial-grade coherent fiber link for optical frequency standard dissemination

Fabiola A. Camargo, Vincent Ménoret, Etienne Cantin, Olivier Lopez, Nicolas Quintin, Émilie Camisard, V. Salmon, J.-M. Le Merdy, Giorgio Santarelli, Anne Amy‐Klein, Paul-Éric Pottie, Bruno Desruelle, Christian Chardonnet

Published Aug 23, 2018• 53 citations
arXivHTMLPDF

Abstract

. No shift is observed within the statistical uncertainty. We show a continuous operation over five days with an uptime of 99.93%. This performance is comparable with the state-of-the-art coherent links established by National Metrology Institutes in Europe. It is a first step in the construction of an optical fiber network for metrology in France, which will give access to an ultrahigh performance frequency standard to a wide community of scientific users.

DOI
10.1364/ao.57.007203

Related papers

Optical fiber link for ultra-stable frequency dissemination and atomic clock comparisons

Anne Amy‐Klein, Nicolas Quintin, N. Chiodo +42 more

The transfer of ultra-stable frequencies between distant laboratories is required by many applications from fundamental metrology to high-precision measurements. For that purpose, optical fibre links have been intensively studied over the last decade. They have demonstrated impressive results far beyond the GPS capabilities on distances up to 2000 km, thanks to an active compensation of the fiber propagation noise.Up to now, optical links has been mainly implemented between two labs, when future applications will require the development of metrological fiber networks. Towards this goal, we have developed a few techniques which allow us to distribute the ultrastable optical signal to many users simultaneously. We have designed repeater laser stations, which can be used to build a cascaded link or to distribute the ultrastable signal among two optical links [1]. These stations allow us also to compare the output end signals of two optical links. These versatile stations will be a key-component of the national metrological network currently being developed in France within the Refimeve+ project. To complete the network, we have demonstrated the extraction of the ultrastable signal from a main link and its seeding to a secondary link [2].Optical links are already been successfully used for clocks comparison. Recently we were able to compare the atomic clocks of the French and German National Metrology Institutes through two connected optical links of total length 1415-km [3]. We found that the two fully independent Sr lattice optical clocks at the two sites agreed to better than 5x10-17 limited only by the clocks uncertainties. A fractional statistical uncertainty of 3x10-17 was reached after only 1000 s averaging time, which is 10 times better, and more than four orders of magnitude faster than with any other existing frequency transfer method. The atomic fountain primary frequency standards from the two institutes were also compared and they were found to agree well within their combined uncertainties of a few 10-16 [4].

•Jan 1, 2017•0 citations

Polarization-Insensitive Coherent Receiving in Optical Fiber Links for Frequency Metrology

Stefano Paracchino, Cecilia Clivati, Paolo Savio +3 more

In recent years, the dissemination of optical frequency signals along phase-stabilized fibers has allowed the comparison of optical clocks at unprecedented levels of accuracy. This has a strong relevance in frequency metrology and boosted the measurement capabilities also in other research fields such as radioastronomy [1], geodesy [2] and fundamental physics [3]. Fiber-based frequency dissemination relies on the transmission of a continuous-wave, narrow-linewidth laser whose frequency is accurately measured with an atomic clock at the National Metrology Institute (NMI) where it is generated. Specific techniques are used to compensate for the acoustic and seismic noise and temperature variations, which degrade the phase stability of the transmitted signal. However, in existing implementations, it is not possible to detect and compensate for the birefringence variations of the optical fiber. These can induce variations in the state of polarization (SOP) of the transmitted signal, affecting the optical beatnotes at the receiving end. This not only degrades the achievable performances in terms of phase stability of the metrological signal, but can also lead to beatnote fading, with consequent failure of the entire system. This problem currently represents one of the strongest limitations to the reliability of fiber-based frequency dissemination.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2019•0 citations

Progress on the REFIMEVE+ project for optical frequency standard dissemination

Etienne Cantin, Nicolas Quintin, Fabrice Wiotte +6 more

High-resolution time and frequency transfer between remote laboratories are of major interest for many fundamentals applications, such as tests of general relativity or temporal variation of fundamental constants performed by comparing clocks signals. We report on the progress of a metrological fiber network on the French territory, with extensions to Europe, which aims to provide an ultra-stable frequency signal to around 20 laboratories. This network is based on the dissemination of an ultra-stable signal using optical links through the academic fiber internet network. As a first step, we have demonstrated robust links of up to 1480 km with stability at 104s and accuracy below 10−19.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Jul 1, 2017•10 citations

REFIMEVE Fiber Network for Time and Frequency Dissemination and Applications

Etienne Cantin, Olivier Lopez, Nicolas Cahuzac +19 more

SummaryWe report the performance of REFIMEVE, a national metrological network of optical fiber links, using the academic fiber network. It enables the coherent dissemination of time and/or frequency reference signals from LNE-SYRTE to around 15 labs and more than 30 in the future. We will show the latest extensions of the network in the Paris urban area and all over France, the architecture required for such al network, and the progress in terms of robustness and uptime. We will also present some applications to precision measurements, in particular ultra-high-resolution molecular spectroscopy in the mid-infrared spectral range.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 15, 2023•3 citations

Coherent Optical-Fiber Link Across Italy and France

Cecilia Clivati, Marco Pizzocaro, Elio K. Bertacco +22 more

The dissemination of atomic clocks with fiber-based techniques finds application in the fields of metrology, fundamental physics, navigation, and spectroscopy but is a challenge in terms of reliability, maintenance, and performance. Here, we describe the realization of a 1023-km-long fiber link between the metrological institutes of Italy and France that shares the infrastructure with the Internet traffic and exploits segmentation in shorter, cascaded spans to fight optical losses exceeding 280 dB. With four months of quasicontinuous operation of this link, we compared the $\mathrm{Cs}$, $\mathrm{Rb}$, and $\mathrm{Yb}$ atomic clocks at our laboratories, highlighting the potential of this tool to assess the clock uncertainty budgets, characterize advanced satellite techniques, and develop optical timescales. The integration of the metrological, fiber-based infrastructures in the two countries, connecting photonics and spectroscopy laboratories as well as telescope facilities, provides the research community with a physical layer over which applications can be built on.

Physical Review Applied•Nov 3, 2022•33 citations

A Coherent Optical Fiber Link for Very Long Baseline Interferometry

Cecilia Clivati, Roberto Gabriel Aiello, G. Bianco +14 more

We realize a phase-stabilised optical fiber backbone that connects the Italian National Metrology Institute with two radio telescopes over a 600 km baseline. This allows referencing of Very Long Baseline Interferometry (VLBI) facilities with the best atomic frequency standards available today and the implementation of a common-clock architecture, which we are now using to assess VLBI ultimate performances.

Conference on Lasers and Electro-Optics•Jan 1, 2020•0 citations
. No shift is observed within the statistical uncertainty. We show a continuous operation over five days with an uptime of 99.93%. This performance is comparable with the state-of-the-art coherent links established by National Metrology Institutes in Europe. It is a first step in the construction of an optical fiber network for metrology in France, which will give access to an ultrahigh performance frequency standard to a wide community of scientific users.
The transfer of ultra-stable frequencies between distant laboratories is required by many applications from fundamental metrology to high-precision measurements. For that purpose, optical fibre links have been intensively studied over the last decade. They have demonstrated impressive results far beyond the GPS capabilities on distances up to 2000 km, thanks to an active compensation of the fiber propagation noise.Up to now, optical links has been mainly implemented between two labs, when future applications will require the development of metrological fiber networks. Towards this goal, we have developed a few techniques which allow us to distribute the ultrastable optical signal to many users simultaneously. We have designed repeater laser stations, which can be used to build a cascaded link or to distribute the ultrastable signal among two optical links [1]. These stations allow us also to compare the output end signals of two optical links. These versatile stations will be a key-component of the national metrological network currently being developed in France within the Refimeve+ project. To complete the network, we have demonstrated the extraction of the ultrastable signal from a main link and its seeding to a secondary link [2].Optical links are already been successfully used for clocks comparison. Recently we were able to compare the atomic clocks of the French and German National Metrology Institutes through two connected optical links of total length 1415-km [3]. We found that the two fully independent Sr lattice optical clocks at the two sites agreed to better than 5x10-17 limited only by the clocks uncertainties. A fractional statistical uncertainty of 3x10-17 was reached after only 1000 s averaging time, which is 10 times better, and more than four orders of magnitude faster than with any other existing frequency transfer method. The atomic fountain primary frequency standards from the two institutes were also compared and they were found to agree well within their combined uncertainties of a few 10-16 [4].
In recent years, the dissemination of optical frequency signals along phase-stabilized fibers has allowed the comparison of optical clocks at unprecedented levels of accuracy. This has a strong relevance in frequency metrology and boosted the measurement capabilities also in other research fields such as radioastronomy [1], geodesy [2] and fundamental physics [3]. Fiber-based frequency dissemination relies on the transmission of a continuous-wave, narrow-linewidth laser whose frequency is accurately measured with an atomic clock at the National Metrology Institute (NMI) where it is generated. Specific techniques are used to compensate for the acoustic and seismic noise and temperature variations, which degrade the phase stability of the transmitted signal. However, in existing implementations, it is not possible to detect and compensate for the birefringence variations of the optical fiber. These can induce variations in the state of polarization (SOP) of the transmitted signal, affecting the optical beatnotes at the receiving end. This not only degrades the achievable performances in terms of phase stability of the metrological signal, but can also lead to beatnote fading, with consequent failure of the entire system. This problem currently represents one of the strongest limitations to the reliability of fiber-based frequency dissemination.
High-resolution time and frequency transfer between remote laboratories are of major interest for many fundamentals applications, such as tests of general relativity or temporal variation of fundamental constants performed by comparing clocks signals. We report on the progress of a metrological fiber network on the French territory, with extensions to Europe, which aims to provide an ultra-stable frequency signal to around 20 laboratories. This network is based on the dissemination of an ultra-stable signal using optical links through the academic fiber internet network. As a first step, we have demonstrated robust links of up to 1480 km with stability at 104s and accuracy below 10−19.
SummaryWe report the performance of REFIMEVE, a national metrological network of optical fiber links, using the academic fiber network. It enables the coherent dissemination of time and/or frequency reference signals from LNE-SYRTE to around 15 labs and more than 30 in the future. We will show the latest extensions of the network in the Paris urban area and all over France, the architecture required for such al network, and the progress in terms of robustness and uptime. We will also present some applications to precision measurements, in particular ultra-high-resolution molecular spectroscopy in the mid-infrared spectral range.
The dissemination of atomic clocks with fiber-based techniques finds application in the fields of metrology, fundamental physics, navigation, and spectroscopy but is a challenge in terms of reliability, maintenance, and performance. Here, we describe the realization of a 1023-km-long fiber link between the metrological institutes of Italy and France that shares the infrastructure with the Internet traffic and exploits segmentation in shorter, cascaded spans to fight optical losses exceeding 280 dB. With four months of quasicontinuous operation of this link, we compared the Cs\mathrm{Cs}Cs, Rb\mathrm{Rb}Rb, and Yb\mathrm{Yb}Yb atomic clocks at our laboratories, highlighting the potential of this tool to assess the clock uncertainty budgets, characterize advanced satellite techniques, and develop optical timescales. The integration of the metrological, fiber-based infrastructures in the two countries, connecting photonics and spectroscopy laboratories as well as telescope facilities, provides the research community with a physical layer over which applications can be built on.