Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1909.02326 · Physical review. B./Physical review. B

Parity-to-charge conversion for readout of topological Majorana qubits

Gábor Széchenyi, András Pályi

Published Jun 25, 2020• 29 citations
arXivHTMLPDF

Abstract

We theoretically study a scheme to distinguish the two ground states of a one-dimensional topological superconductor, which could serve as a basis for the readout of Majorana qubits. The scheme is based on parity-to-charge conversion, i.e., the ground-state parity of the superconductor is converted to the charge occupation on a tunnel-coupled auxiliary quantum dot. We describe how certain error mechanisms degrade the quality of the parity-to-charge conversion process. We consider (i) leakage due to a strong readout tunnel pulse, (ii) incomplete charge Rabi oscillations due to slow charge noise, and (iii) charge relaxation due to phonon emission and absorption. To describe these effects, we use simple model Hamiltonians based on the ideal Kitaev chain, and draw conclusions to generic one-dimensional topological superconductors wherever possible. In general, the effects of the error mechanisms can be minimized by choosing a smooth shape and an optimal strength for the readout tunnel pulse. In a case study based on InAs heterostructure device parameters, we estimate that the parity-to-charge conversion error is mainly due to slow charge noise for weak tunnel pulses and leakage for strong tunnel pulses.

DOI
10.1103/physrevb.101.235441

Related papers

Four-Majorana qubit with charge readout: Dynamics and decoherence

Tommy Li, W. A. Coish, Michael Hell +2 more

We present a theoretical analysis of a Majorana-based qubit consisting of two topological superconducting islands connected via a Josephson junction. The qubit is operated by electrostatic gates which control the coupling of two of the four Majorana zero modes. At the end of the operation, readout is performed in the charge basis. Even though the operations are not topologically protected, the proposed experiment can potentially shed light on the coherence of the parity degree of freedom in Majorana devices and serve as a first step towards topological Majorana qubits. We discuss in detail the charge-stability diagram and its use for characterizing the parameters of the devices, including the overlap of the Majorana edge states. We describe the multilevel spectral properties of the system and present a detailed study of its controlled coherent oscillations, as well as decoherence resulting from coupling to a non-Markovian environment. In particular, we study a gate-controlled protocol where conversion between Coulomb-blockade and transmon regimes generates coherent oscillations of the qubit state due to the overlap of Majorana modes. We show that, in addition to fluctuations of the Majorana coupling, considerable measurement errors may be accumulated during the conversion intervals when electrostatic fluctuations in the superconducting islands are present. These results are also relevant for several proposed implementations of topological qubits which rely on readout based on charge detection.

arXiv:1807.05839•Physical review. B./Physical review. B•Nov 5, 2018•25 citations

Readout of Majorana parity states using a quantum dot

Kaveh Gharavi, Darryl Hoving, Jonathan Baugh

We theoretically examine a scheme for projectively reading out the parity state of a pair of Majorana bound states (MBSs) using a tunnel-coupled quantum dot. The dot is coupled to one end of the topological wire but isolated from any reservoir and is capacitively coupled to a charge sensor for measurement. The combined parity of the MBS-dot system is conserved, and charge transfer between the MBS and dot only occurs through resonant tunneling. Resonance is controlled by the dot potential through a local gate and by the MBS energy splitting due to the overlap of the MBS pair wave functions. The latter splitting can be tuned from zero (topologically protected regime) to a finite value by gate-driven shortening of the topological wire. Simulations show that the oscillatory nature of the MBS splitting is not a fundamental obstacle to readout but requires precise gate control of the MBS spatial position and dot potential. With experimentally realistic parameters, we find that high-fidelity parity readout is achievable given nanometer-scale spatial control of the MBS and that there is a trade-off between required precisions of temporal and spatial control. Use of the scheme to measure the MBS splitting versus separation would present a clear signature of topological order and could be used to test the robustness of this order to spatial motion, a key requirement in certain schemes for scalable topological qubits. We show how the scheme can be extended to distinguish valid parity measurements from invalid ones due to gate calibration errors.

arXiv:1601.07506•Physical review. B./Physical review. B•Oct 12, 2016•40 citations

Fermion-parity qubit in a proximitized double quantum dot

Max Geier, Rubén Seoane Souto, Jens Schulenborg +3 more

Bound states in quantum dots coupled to superconductors can be in a coherent superposition of states with different electron number but with the same fermion parity. Electrostatic gating can tune this superposition to a sweet spot, where the quantum dot has the same mean electric charge independent of its electron-number parity. Here, we propose to encode quantum information in the local fermion parity of two tunnel-coupled quantum dots embedded in a Josephson junction. At the sweet spot, the qubit states have zero charge dipole moment. This protects the qubit from dephasing due to charge noise acting on the potential of each dot, as well as fluctuations of the (weak) interdot tunneling. At weak interdot tunneling, relaxation is suppressed because of disjoint qubit states. However, for strong interdot tunneling the system is protected against noise affecting each quantum dot separately (energy-level noise, dot-superconductor tunneling fluctuations, and hyperfine interactions). Finally, we describe initialization and readout as well as single-qubit and two-qubit gates by pulsing gate voltages. Published by the American Physical Society 2024

arXiv:2307.05678•Physical Review Research•Jun 17, 2024•20 citations

Charge Noise and Overdrive Errors in Dispersive Readout of Charge, Spin, and Majorana Qubits

Vahid Derakhshan Maman, M. Fernando González-Zalba, András Pályi

Solid-state qubits incorporating quantum dots can be read out dispersively. Here, we theoretically describe physical mechanisms that render such reflectometry-based readout schemes imperfect. We discuss charge qubits, singlet-triplet spin qubits, and Majorana qubits. In our model, we account for readout errors due to slow charge noise, and due to overdriving, when the large amplitude of the probe field generates errors. A key result is that for charge and spin qubits, the readout fidelity saturates at large probe strengths, whereas for Majorana qubits, there is an optimal probe strength which provides a maximized readout fidelity. We also point out the existence of severe readout errors appearing in a resonancelike fashion as the pulse strength is increased, and show that these errors are related to probe-induced multiphoton transitions. Besides providing practical guidelines toward optimized readout, our study might also inspire ways to use gate reflectometry for device characterization.

arXiv:2006.12391•Physical Review Applied•Dec 8, 2020•31 citations

Parity-to-charge conversion in Majorana qubit readout

Morten I. K. Munk, Jens Schulenborg, Reinhold Egger +1 more

The paper studies the readout processes of Majorana qubits using coupling to a quantum dot and a charge sensor. The dynamics of the system after switching on the measurement device is calculated by an effective Lindblad master equation going beyond the rotating-wave approximation.

arXiv:2004.02123•Physical Review Research•Aug 17, 2020•44 citations

Majorana parity qubit in coupled minimal Kitaev chains

Francesco Zatelli, Bart Roovers, Nick van Loo +11 more

Majorana zero modes provide a route to fault-tolerant qubits by encoding information non-locally in fermion parity. Their sensitivity to noise is expected to decrease exponentially with increasing separation between the Majoranas, a suppression known as topological protection. Kitaev chains engineered in quantum dot-superconductor arrays provide a tunable platform in which separated Majorana zero modes can emerge at the ends of the chain, even in two-site chains. These minimal-chain modes are known as poor man's Majoranas and retain characteristic Majorana properties, including near-zero energy and equal electron-hole character, but have only limited protection. A key outstanding challenge is to move beyond identifying such modes in electrical transport measurements and achieve coherent qubit control in the time domain. Here, we demonstrate a Majorana parity qubit by realizing coherent coupling between two-site Kitaev chains. Since total fermion parity is conserved, the system separates into global even and odd parity manifolds. We observe coherent parity oscillations in both manifolds with equal oscillation frequencies at the Majorana sweet spot, as predicted for isolated Majorana zero modes. We further show that the oscillation frequency and coherence depend systematically on inter-chain coupling and quantum-dot detunings, in close agreement with our model for short, partially protected chains. Our results establish the first coherent control of a Majorana qubit, encoded in the fermion parity of Majorana zero modes in minimal Kitaev chains.

cond-mat.mes-hallCross-listedarXiv:2607.09511•Jul 13, 2026•0 citations
We theoretically study a scheme to distinguish the two ground states of a one-dimensional topological superconductor, which could serve as a basis for the readout of Majorana qubits. The scheme is based on parity-to-charge conversion, i.e., the ground-state parity of the superconductor is converted to the charge occupation on a tunnel-coupled auxiliary quantum dot. We describe how certain error mechanisms degrade the quality of the parity-to-charge conversion process. We consider (i) leakage due to a strong readout tunnel pulse, (ii) incomplete charge Rabi oscillations due to slow charge noise, and (iii) charge relaxation due to phonon emission and absorption. To describe these effects, we use simple model Hamiltonians based on the ideal Kitaev chain, and draw conclusions to generic one-dimensional topological superconductors wherever possible. In general, the effects of the error mechanisms can be minimized by choosing a smooth shape and an optimal strength for the readout tunnel pulse. In a case study based on InAs heterostructure device parameters, we estimate that the parity-to-charge conversion error is mainly due to slow charge noise for weak tunnel pulses and leakage for strong tunnel pulses.
We present a theoretical analysis of a Majorana-based qubit consisting of two topological superconducting islands connected via a Josephson junction. The qubit is operated by electrostatic gates which control the coupling of two of the four Majorana zero modes. At the end of the operation, readout is performed in the charge basis. Even though the operations are not topologically protected, the proposed experiment can potentially shed light on the coherence of the parity degree of freedom in Majorana devices and serve as a first step towards topological Majorana qubits. We discuss in detail the charge-stability diagram and its use for characterizing the parameters of the devices, including the overlap of the Majorana edge states. We describe the multilevel spectral properties of the system and present a detailed study of its controlled coherent oscillations, as well as decoherence resulting from coupling to a non-Markovian environment. In particular, we study a gate-controlled protocol where conversion between Coulomb-blockade and transmon regimes generates coherent oscillations of the qubit state due to the overlap of Majorana modes. We show that, in addition to fluctuations of the Majorana coupling, considerable measurement errors may be accumulated during the conversion intervals when electrostatic fluctuations in the superconducting islands are present. These results are also relevant for several proposed implementations of topological qubits which rely on readout based on charge detection.
We theoretically examine a scheme for projectively reading out the parity state of a pair of Majorana bound states (MBSs) using a tunnel-coupled quantum dot. The dot is coupled to one end of the topological wire but isolated from any reservoir and is capacitively coupled to a charge sensor for measurement. The combined parity of the MBS-dot system is conserved, and charge transfer between the MBS and dot only occurs through resonant tunneling. Resonance is controlled by the dot potential through a local gate and by the MBS energy splitting due to the overlap of the MBS pair wave functions. The latter splitting can be tuned from zero (topologically protected regime) to a finite value by gate-driven shortening of the topological wire. Simulations show that the oscillatory nature of the MBS splitting is not a fundamental obstacle to readout but requires precise gate control of the MBS spatial position and dot potential. With experimentally realistic parameters, we find that high-fidelity parity readout is achievable given nanometer-scale spatial control of the MBS and that there is a trade-off between required precisions of temporal and spatial control. Use of the scheme to measure the MBS splitting versus separation would present a clear signature of topological order and could be used to test the robustness of this order to spatial motion, a key requirement in certain schemes for scalable topological qubits. We show how the scheme can be extended to distinguish valid parity measurements from invalid ones due to gate calibration errors.
Bound states in quantum dots coupled to superconductors can be in a coherent superposition of states with different electron number but with the same fermion parity. Electrostatic gating can tune this superposition to a sweet spot, where the quantum dot has the same mean electric charge independent of its electron-number parity. Here, we propose to encode quantum information in the local fermion parity of two tunnel-coupled quantum dots embedded in a Josephson junction. At the sweet spot, the qubit states have zero charge dipole moment. This protects the qubit from dephasing due to charge noise acting on the potential of each dot, as well as fluctuations of the (weak) interdot tunneling. At weak interdot tunneling, relaxation is suppressed because of disjoint qubit states. However, for strong interdot tunneling the system is protected against noise affecting each quantum dot separately (energy-level noise, dot-superconductor tunneling fluctuations, and hyperfine interactions). Finally, we describe initialization and readout as well as single-qubit and two-qubit gates by pulsing gate voltages. Published by the American Physical Society 2024
Solid-state qubits incorporating quantum dots can be read out dispersively. Here, we theoretically describe physical mechanisms that render such reflectometry-based readout schemes imperfect. We discuss charge qubits, singlet-triplet spin qubits, and Majorana qubits. In our model, we account for readout errors due to slow charge noise, and due to overdriving, when the large amplitude of the probe field generates errors. A key result is that for charge and spin qubits, the readout fidelity saturates at large probe strengths, whereas for Majorana qubits, there is an optimal probe strength which provides a maximized readout fidelity. We also point out the existence of severe readout errors appearing in a resonancelike fashion as the pulse strength is increased, and show that these errors are related to probe-induced multiphoton transitions. Besides providing practical guidelines toward optimized readout, our study might also inspire ways to use gate reflectometry for device characterization.
Majorana zero modes provide a route to fault-tolerant qubits by encoding information non-locally in fermion parity. Their sensitivity to noise is expected to decrease exponentially with increasing separation between the Majoranas, a suppression known as topological protection. Kitaev chains engineered in quantum dot-superconductor arrays provide a tunable platform in which separated Majorana zero modes can emerge at the ends of the chain, even in two-site chains. These minimal-chain modes are known as poor man's Majoranas and retain characteristic Majorana properties, including near-zero energy and equal electron-hole character, but have only limited protection. A key outstanding challenge is to move beyond identifying such modes in electrical transport measurements and achieve coherent qubit control in the time domain. Here, we demonstrate a Majorana parity qubit by realizing coherent coupling between two-site Kitaev chains. Since total fermion parity is conserved, the system separates into global even and odd parity manifolds. We observe coherent parity oscillations in both manifolds with equal oscillation frequencies at the Majorana sweet spot, as predicted for isolated Majorana zero modes. We further show that the oscillation frequency and coherence depend systematically on inter-chain coupling and quantum-dot detunings, in close agreement with our model for short, partially protected chains. Our results establish the first coherent control of a Majorana qubit, encoded in the fermion parity of Majorana zero modes in minimal Kitaev chains.