We theoretically examine a scheme for projectively reading out the parity state of a pair of Majorana bound states (MBSs) using a tunnel-coupled quantum dot. The dot is coupled to one end of the topological wire but isolated from any reservoir and is capacitively coupled to a charge sensor for measurement. The combined parity of the MBS-dot system is conserved, and charge transfer between the MBS and dot only occurs through resonant tunneling. Resonance is controlled by the dot potential through a local gate and by the MBS energy splitting due to the overlap of the MBS pair wave functions. The latter splitting can be tuned from zero (topologically protected regime) to a finite value by gate-driven shortening of the topological wire. Simulations show that the oscillatory nature of the MBS splitting is not a fundamental obstacle to readout but requires precise gate control of the MBS spatial position and dot potential. With experimentally realistic parameters, we find that high-fidelity parity readout is achievable given nanometer-scale spatial control of the MBS and that there is a trade-off between required precisions of temporal and spatial control. Use of the scheme to measure the MBS splitting versus separation would present a clear signature of topological order and could be used to test the robustness of this order to spatial motion, a key requirement in certain schemes for scalable topological qubits. We show how the scheme can be extended to distinguish valid parity measurements from invalid ones due to gate calibration errors.
We theoretically examine a scheme for projectively reading out the parity state of a pair of Majorana bound states (MBSs) using a tunnel-coupled quantum dot. The dot is coupled to one end of the topological wire but isolated from any reservoir and is capacitively coupled to a charge sensor for measurement. The combined parity of the MBS-dot system is conserved, and charge transfer between the MBS and dot only occurs through resonant tunneling. Resonance is controlled by the dot potential through a local gate and by the MBS energy splitting due to the overlap of the MBS pair wave functions. The latter splitting can be tuned from zero (topologically protected regime) to a finite value by gate-driven shortening of the topological wire. Simulations show that the oscillatory nature of the MBS splitting is not a fundamental obstacle to readout but requires precise gate control of the MBS spatial position and dot potential. With experimentally realistic parameters, we find that high-fidelity parity readout is achievable given nanometer-scale spatial control of the MBS and that there is a trade-off between required precisions of temporal and spatial control. Use of the scheme to measure the MBS splitting versus separation would present a clear signature of topological order and could be used to test the robustness of this order to spatial motion, a key requirement in certain schemes for scalable topological qubits. We show how the scheme can be extended to distinguish valid parity measurements from invalid ones due to gate calibration errors.
Majorana bound states (MBSs), with their non-Abelian statistics and topological protection, are key candidates for fault-tolerant quantum computation. However, their unambiguous identification in solid-state systems remains a fundamental challenge. Here, we present a theoretical study demonstrating that drag transport in a capacitively coupled double quantum dot system offers a robust and nonlocal probe of weakly coupled MBSs. Using the master equation approach, we investigate both steady-state and transient dynamics and uncover a distinctive signature of MBSs, namely the emergence of pronounced split peaks in the drag transconductance, directly linked to inter-MBS coupling. We further show that the dynamics of quantum coherence is correlated with the emergence and enhancement of MBS-induced split peaks in the drag transconductance. A comparative analysis with trivial subgap states reveals key differences, that is, MBS-induced transconductance peaks are symmetric and exhibit characteristic splitting, while trivial-state features are generally asymmetric and lack such robust splitting behavior. These findings establish experimentally accessible criteria for distinguishing MBSs from trivial subgap states and provide a practical framework for probing Majorana physics through nonlocal transport.
We present a theoretical analysis of a Majorana-based qubit consisting of two topological superconducting islands connected via a Josephson junction. The qubit is operated by electrostatic gates which control the coupling of two of the four Majorana zero modes. At the end of the operation, readout is performed in the charge basis. Even though the operations are not topologically protected, the proposed experiment can potentially shed light on the coherence of the parity degree of freedom in Majorana devices and serve as a first step towards topological Majorana qubits. We discuss in detail the charge-stability diagram and its use for characterizing the parameters of the devices, including the overlap of the Majorana edge states. We describe the multilevel spectral properties of the system and present a detailed study of its controlled coherent oscillations, as well as decoherence resulting from coupling to a non-Markovian environment. In particular, we study a gate-controlled protocol where conversion between Coulomb-blockade and transmon regimes generates coherent oscillations of the qubit state due to the overlap of Majorana modes. We show that, in addition to fluctuations of the Majorana coupling, considerable measurement errors may be accumulated during the conversion intervals when electrostatic fluctuations in the superconducting islands are present. These results are also relevant for several proposed implementations of topological qubits which rely on readout based on charge detection.
Reading out Majorana bound states (MBSs) is essential both to verify their non-Abelian property and to realize topological quantum computation. Here, we construct a protocol to measure the parity of two MBSs in a Majorana island coupled to a double quantum dot (DQD). The parity information is mapped to the charge state of the DQD through Landau-Zener transition. The operation needed is sweeping the bias of the DQD, which is followed by charge sensing. In the case without fine-tuning, a single run of sweep and detection implements a weak measurement of the parity. We find that in general a sequence of about ten runs would completely project a superposition state to either parity, and the charge detection in each run records how the state of the MBSs collapses step by step. Remarkably, this readout protocol is a nondemolition measurement and robust to low-frequency charge fluctuation.
We theoretically study a scheme to distinguish the two ground states of a one-dimensional topological superconductor, which could serve as a basis for the readout of Majorana qubits. The scheme is based on parity-to-charge conversion, i.e., the ground-state parity of the superconductor is converted to the charge occupation on a tunnel-coupled auxiliary quantum dot. We describe how certain error mechanisms degrade the quality of the parity-to-charge conversion process. We consider (i) leakage due to a strong readout tunnel pulse, (ii) incomplete charge Rabi oscillations due to slow charge noise, and (iii) charge relaxation due to phonon emission and absorption. To describe these effects, we use simple model Hamiltonians based on the ideal Kitaev chain, and draw conclusions to generic one-dimensional topological superconductors wherever possible. In general, the effects of the error mechanisms can be minimized by choosing a smooth shape and an optimal strength for the readout tunnel pulse. In a case study based on InAs heterostructure device parameters, we estimate that the parity-to-charge conversion error is mainly due to slow charge noise for weak tunnel pulses and leakage for strong tunnel pulses.
In this Rapid Communication we analyze the efficiency of operations based on transferring charge from a quantum dot (QD) to two coupled topological superconductors, which can be used for performing non-Abelian operations on Majorana bound states (MBSs). We develop a method which allows us to describe the full time evolution of the system as the QD energy is manipulated. Using a full counting statistics analysis, we set bounds to the operation timescales. The lower bound depends on the superconducting phase difference due to a partial decoupling of the different MBS parity sectors, while the upper bound is set by the tunneling of quasiparticles to the MBSs. Using realistic parameters, we find the existence of a regime where the operation can be carried out with a fidelity close to unity. Finally, we propose the use of a two-operation protocol to quantify the effect of the dephasing and accumulated dynamical phases, demonstrating their absence for certain superconducting phase differences.
Recent experiments have measured flux dependent capacitance at radio frequencies leading to the potential for a fast parity read-out of a Majorana qubit. In this work we argue that the quantum dot used in the capacitance measurement can be reasonably approximated by a non-interacting weakly coupled orbital. We then predict the measured flux and parity dependent capacitance for several parameter regimes of the disordered Majorana nanowire model that are both topological and trivial. Following this we study how such a fast capacitance read-out can be used to characterize the quantum coherence of a Majorana nanowire-based qubit using Rabi oscillations. We additionally show that such measurements, if made possible by coherent inter-wire tunneling, would provide a valuable way of characterizing the low energy states in the frequency domain.