We demonstrate a method for manipulating small ensembles of vortices in multiply connected superconducting structures. A micron-size magnetic particle attached to the tip of a silicon cantilever is used to locally apply magnetic flux through the superconducting structure. By scanning the tip over the surface of the device and by utilizing the dynamical coupling between the vortices and the cantilever, a high-resolution spatial map of the different vortex configurations is obtained. Moving the tip to a particular location in the map stabilizes a distinct multivortex configuration. Thus, the scanning of the tip over a particular trajectory in space permits nontrivial operations to be performed, such as braiding of individual vortices within a larger vortex ensemble-a key capability required by many proposals for topological quantum computing.
We demonstrate a method for manipulating small ensembles of vortices in multiply connected superconducting structures. A micron-size magnetic particle attached to the tip of a silicon cantilever is used to locally apply magnetic flux through the superconducting structure. By scanning the tip over the surface of the device and by utilizing the dynamical coupling between the vortices and the cantilever, a high-resolution spatial map of the different vortex configurations is obtained. Moving the tip to a particular location in the map stabilizes a distinct multivortex configuration. Thus, the scanning of the tip over a particular trajectory in space permits nontrivial operations to be performed, such as braiding of individual vortices within a larger vortex ensemble-a key capability required by many proposals for topological quantum computing.
Vortices and vortex lattices play a major role in determining the transport properties of type-II superconductors[1–3], and enable a platform to investigate exotic superconducting physics[4,5]. The study of vortex matter has generally focused on novel states in 2D films and structures, and has recently moved to investigating systems with constrained dimensions and smaller vortex numbers[6–11]. Vortices are responsible, for example, for some electrical transport regimes in superconducting films, as well as the Berezinkskii-Kosterlitz-Thouless phase transition in superconducting films[12]. Unconventional forms of superconductivity, such as the spin triplet pairing predicted in Sr2RuO4, or in topological insulators paired to s-wave superconductors, contain two condensates that may support two vortex lattices, and may display Majorana modes, signatures of which may have been seen in other superconducting systems[13–17]. The vortex-vortex interactions, or inter and intra-condensate couplings in multicondensate systems, are important parameters that characterize the behavior of the systems that display such phenomena[18–20]. In investigating these parameters, a technique that can both probe the energies in a system, as well as manipulate the vortices therein, has long been desired. In this work, we report on progress in determining the energy scales of vortex systems, as well as limited control over the vortex motion. Using a technique based on magnetic force microscopy, we can directly measure the resonant motion of vortices present in a superconducting lattice. We use a scanning magnetic tip to trap a small number of vortices in a superconducting Josephson junction array near the tip. By observing the resonant motion of the configuration of vortices, a map of the location of energy degeneracies between different stable configurations is generated. From this data, we use a simulation to extract the relative strengths of the characteristic energy scales for the system, including the vortex-magnetic field interaction, the vortex-vortex interaction strength, and the chemical potential for the vortices. The simulations for small numbers of vortices fits the data well for multiple field profiles and lattice spacings. The ability to tune the vortex number and configurations by changing the magnetic field profile from the tip, as well as the lattice parameters of the superconducting surface, are key portions of this technique. We demonstrate that the relative strengths of the chemical potential and vortex-vortex interactions can be tuned relative to the vortex-magnetic field energy by changing the lattice spacing of the array. We also show that by moving the tip farther from or closer to the surface, which changes the potential well from the tip, that the configurations of vortices can be modified. From the experiments, we show that this technique can be used to both extract the strengths of the relative energy scales in this system and other superconducting systems, as well as for manipulating the vortex configurations for quantum computation applications.
Quantized vortices, as topological defects, play an important role in both physics and technological applications of superconductors. Normally, the nucleation of vortices requires the presence of a high magnetic field or current density, which allow the vortices to enter from the sample boundaries. At the same time, the controllable generation of individual vortices inside a superconductor is still challenging. Here, we report the controllable creation of single quantum vortices and antivortices at any desirable position inside a superconductor. We exploit the local heating effect of a scanning tunneling microscope (STM) tip: superconductivity is locally suppressed by the tip and vortex-antivortex pairs are generated when supercurrent flows around the hot spot. The experimental results are well-explained by theoretical simulations within the Ginzburg-Landau approach.
Josephson vortices play an essential role in superconducting quantum electronics devices. Often seen as purely conceptual topological objects, 2π-phase singularities, their observation and manipulation are challenging. Here we show that in Superconductor-Normal metal-Superconductor lateral junctions Josephson vortices have a peculiar magnetic fingerprint that we reveal in Magnetic Force Microscopy (MFM) experiments. Based on this discovery, we demonstrate the possibility of the Josephson vortex generation and manipulation by the magnetic tip of a MFM, thus paving a way for the remote inspection and control of individual nano-components of superconducting quantum circuits.
Phase shifter is one of the key elements of quantum electronics. In order to facilitate operation and avoid decoherence, it has to be reconfigurable, persistent, and nondissipative. In this work, we demonstrate prototypes of such devices in which a Josephson phase shift is generated by coreless superconducting vortices. The smallness of the vortex allows a broad-range tunability by nanoscale manipulation of vortices in a micron-size array of vortex traps. We show that a phase shift in a device containing just a few vortex traps can be reconfigured between a large number of quantized states in a broad [-3π, +3π] range.
We examine the vortex states in a 2D superconductor interacting with a square array of pinning sites. As a function of increasing pinning size or strength we find a series of novel phases including multivortex and composite superlattice states such as aligned dimer and trimer configurations at individual pinning sites. Interactions of the vortices give rise to an orientational ordering of the internal vortex structures in each pinning site. We also show that these vortex states can give rise to a multistage melting behavior.
We use a scanning superconducting quantum interference device (SQUID) to image the magnetic flux produced by a superconducting device designed for quantum computing. The nanometer-scale SQUID-on-tip probe reveals the flow of superconducting current through the circuit as well as the locations of trapped magnetic flux. In particular, maps of current flowing out of a flux-control line in the vicinity of a qubit show how these elements are coupled, providing insight on how to optimize qubit control.