Fast High-Fidelity Quantum Nondemolition Qubit Readout via a Nonperturbative Cross-Kerr Coupling
Rémy Dassonneville, T. Ramos, Vladimir Milchakov, Luca Planat, Étienne Dumur, F. Foroughi, J. Puertas, Sébastien Leger, Karthik Srikanth Bharadwaj, Jovian Delaforce, Cécile Naud, Wiebke Guichard, J. J. García-Ripoll, Nicolas Roch, O. Buisson
A new qubit readout scheme preserves quantum state probabilities while maximizing fidelity with a fast readout time, thus providing a robust measurement method for a new generation of superconducting quantum processors.
Fast, high-fidelity, and quantum nondemolition (QND) qubit readout is an essential element of quantum information processing. For superconducting qubits, state-of-the-art readout is based on a dispersive cross-Kerr coupling between a qubit and its readout resonator. The resulting readout can be high fidelity and QND, but readout times are currently limited to the order of 50 nanoseconds due to the dispersive cross-Kerr of magnitude 10 megahertz. Here, we present a readout scheme that uses the quarton coupler to facilitate a large (greater than 200 megahertz) cross-Kerr between a transmon qubit and its readout resonator. Full master equation simulations of the coupled system show a 5-nanosecond readout time with greater than 99% readout fidelity and greater than 99.9% QND fidelity. The quartonic readout circuit is experimentally feasible and preserves the coherence properties of the qubit. Our work reveals a path for order of magnitude improvements of superconducting qubit readout by engineering nonlinear light-matter couplings in parameter regimes unreachable by existing designs.
Quantum technologies, including those based on superconducting quantum circuits, require high-fidelity high-speed detection of the quantum state of a qubit. Standard quantum nondemolition readout of a superconducting qubit is based on its dispersive coupling to a resonator, but this method suffers from the Purcell effects: Purcell decay, critical photon number, and qubit-dependent Kerr nonlinearity. The authors propose a method in which both speed and fidelity of flux-qubit readout can avoid all three Purcell limitations.
Dispersive readout, the current standard for measuring superconducting qubits, relies on relatively easy to engineer, static transverse coupling between a qubit and a detuned cavity mode. However, this method requires circuit design trade-offs between qubit-cavity coupling, cavity-feedline coupling, detuning, and the resultant decoherence introduced by the cavity mode. Additionally, the criteria for performing quantum nondemolition measurements, including reduced cavity photon numbers, further limits speed and fidelity. In this work, we introduce a circuit with pulse-tunable qubit-cavity and cavity-feedline couplings so that the entire qubit-measurement process can be fully optimized. Here, the core measurement process resembles a quantum gate operation between the qubit and the cavity, with the cavity acting like an ancilla, storing the qubit-state information. To fully explore time-dependent effects of the full qubit-cavity dynamics, we go beyond the rotating-wave, Jaynes-Cummings, or dispersive approximations, to develop a pulsed-measurement protocol. In addition, we propose a realistic circuit architecture that can provide a very fast, high-fidelity, QND measurement with near-unit efficiency.
The ability to perform high-fidelity quantum nondemolition qubit readout is pivotal for the realization of large and powerful quantum computers. Such readout of superconducting qubits is generally enabled by amplifying the weak dispersive measurement signals using phase-preserving quantum-limited Josephson amplifiers with sufficient gain to dilute the contribution of the added noise by the output chain. Here, we further enhance the qubit readout fidelity by (1) simultaneously measuring the two-mode squeezed states of the amplified readout signals at the signal and idler frequencies of the nondegenerate amplifier and (2) coherently combining them at the classical processing stage following a relative rotation that maximizes the signal to noise ratio of the qubit-encoded readout quadrature. Such readout scheme exhibits enhancement in the readout fidelity for all practical values of amplifier gain and noise added by the output chain and is fully compatible with frequency multiplexed setups used in large quantum processors.
Fast, high-fidelity, scalable state preparation and measurement is critical to the realization of a quantum computing system. The state-of-the-art methods for preparation and readout of superconducting qubits require finely tuned microwave signals and ~100 ns of measurement time, which are major obstacles to the scalability and performance of superconducting quantum computers. Here, we have demonstrated novel, microwave-free methods for both preparation and readout of superconducting qubits with >99% fidelity in only 10 ns for either operation while maintaining qubit coherence. This technology is compatible with scalable superconducting digital control systems, and using quantum flux parametrons for amplification, we demonstrated full quantum-to-digital conversion in only 15 ns, which is an order of magnitude faster than state-of-the-art microwave-based techniques.
Dispersive readout, the standard method for measuring superconducting qubits, is limited by multiphoton qubit-resonator processes arising even at moderate drive powers. These processes degrade performance, causing dispersive readout to lag behind single- and two-qubit gates in both speed and fidelity. In this Letter, we propose a novel readout method, termed junction readout. Junction readout leverages the nonperturbative cross-Kerr interaction resulting from coupling a qubit and a resonator via a Josephson junction. Furthermore, by adding a capacitive coupling in parallel to the junction, Purcell decay induced by the exchange coupling can be suppressed. We also show that junction readout is more robust against deleterious multiphoton processes, and offers greater flexibility for resonator frequency allocation. Crucially, junction readout achieves superior performance compared to dispersive readout while maintaining similar hardware overhead. Numerical simulations show that junction readout can achieve fidelity exceeding 99.99% in under 30 ns of integration time, making it a promising alternative for superconducting qubit readout with current hardware.