Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1904.06410 · Applied Physics Letters

Cooling of a levitated nanoparticle with digital parametric feedback

Yu Zheng, Guang-Can Guo, Fang-Wen Sun

Published Sep 2, 2019• 18 citations
arXivHTMLPDF

Abstract

The motion control of a levitated nanoparticle plays a central role in optical levitation for fundamental studies and practical applications. Here, we presented digital parametric feedback cooling based on square wave modulation by switching trapping laser intensity between two levels. The effects of the modulation depth and modulation signal phase on the cooling result were investigated in detail. Using such a digital parametric feedback method, the center-of-mass temperature of all three motional degrees of freedom can be cooled to dozens of millikelvin. The flexibility and agility of the digital feedback control pave the way for a variety of motion control modes.

DOI
10.1063/1.5099284

Related papers

Microkelvin Control of an Optically Levitated Nanoparticle

Vijay Jain, Felix Tebbenjohanns, Lukáš Novotný

Here, a high-power photodetector is used in conjunction with parametric feedback in an optical tweezer trap to cool the center-of-mass motion of a levitated nanoparticle from room temperature to 145 µK, or n = 21.

Frontiers in Optics•Jan 1, 2016•6 citations

3D sympathetic cooling and detection of levitated nanoparticles

Dmitry S. Bykov, Lorenzo Dania, Florian Goschin +1 more

Cooling the center-of-mass motion of levitated nanoparticles provides a route to quantum experiments at mesoscopic scales. Here we demonstrate three-dimensional sympathetic cooling and detection of the center-of-mass motion of a levitated silica nanoparticle. The nanoparticle is electrostatically coupled to a feedback-cooled particle while both particles are trapped in the same Paul trap. We identify two regimes, based on the strength of the cooling: in the first regime, the sympathetically cooled particle thermalizes with the directly cooled one, while in the second regime, the sympathetically cooled particle reaches a minimum temperature. This result provides a route to efficiently cool and detect particles that cannot be illuminated with strong laser light, such as absorptive particles, and paves the way for controlling the motion of arrays of several trapped nanoparticles.

arXiv:2210.07583•Optica•Feb 6, 2023•26 citations

Cooling of a mesoscopic single-particle harmonic oscillator using real-time digital control systems

Ashley Setter

Optically levitated systems provide an ideal environment for isolating objects extremely well from the environment such that their behaviour can be more easily studied without external influences. Moreover, using optical detection, very high levels of sensitivity to that behaviour can be achieved, allowing precise detection of their motion and measurement of forces upon such a system. In the experiment we describe in this thesis, one can construct an optical gradient force trap by simply directing a collimated light beam onto a parabolic mirror with a sufficiently high numerical aperture. The resulting focusing not only generates the optical trapping potential but also allows detection as a particle trapped at the focal spot of the mirror has the light it scatters onto the mirror collimated and sent back in the direction of the incident trapping light beam. The trap described here allows levitation of dielectric nanoparticles with radii from 10nm to 300nm at pressures from 103 —10-8 mbar. In this thesis I describe the experimental setup and the theory describing a particle levitated in this setup, detailing how, from the detected light intensity on a photodetector, we can extract the properties describing the physical system, including the frequency of motion, the damping upon the motion, the temperature associated with the motion, the radius of the trapped nanoparticle and the conversion factor which allows us to convert from the photo-current measured by the detector to the physical displacement of the particle. Cooling of the translational motion to the ground state is a much targeted goal in the field of levitated optomechanics as it has applications in producing quantum states, performing matter-wave interferometry, testing collapse models and as a very precise force sensor. In this thesis I demonstrate and investigate a number of different cooling methods applied to the translational motion. First, I describe how one can utilise an FIR (Finite Impulse Response) band-pass filter to isolate the signal due to the motion of a single translational degree of freedom and utilise this to perform active feedback cooling upon this degree of freedom. I demonstrate this by implementing an FIR filter on a FPGA (Field Programmable Gate Array) and utilising it in real-time to cool the motion to 2.5K ± 0.4 K. Secondly I utilise a tracking algorithm called a Kalman Filter, I describe how this algorithm functions to track the state of objects from noisy partial measurements of the state and how this can be applied to track levitated nanoparticles. I then detail how this was implemented in an FPGA so that the Kalman Filter could be used in real-time to estimate the position of a levitated nanoparticle. We demonstrate cooling of the translation centre-of-mass motion along the optical axis by 3 orders of magnitude to a temperature of 162mK ± 15 mK. Next I describe a classical model of the motion of a levitated nanoparticle and describe how this model can be simulated numerically to produce simulated time traces of the motion. I then demonstrate how this simulation can be used to reproduce several theoretical relations as well as reproduce experimental results and be utilised to simulate and test the performance of cooling algorithms without requiring experimental implementation. Next I use this simulation to model the effect of a Dung non-linearity in the trapping potential. I match the behaviour of the simulation when exposed to as a pulsed reduction of the laser power with the behaviour of the experimental system when exposed to the same stimulus and in doing so extract the Dung non-linearity in the optical trapping potential generated by the parabolic mirror, which takes a value of ξ = -0.100 m-2. Finally I describe a quantum model of the motion of a levitated nanosphere, which takes into account the various decoherence sources in the experimental system, namely the interaction with the background gas, the laser photons and decoherence due to the measurement. Using this I investigate several different forms of active feedback cooling, including the "optimal" cooling as determined from the tools of control theory, which takes the form of a square wave, and the more traditional sinusoidal feedback signal. In addition I compare both linear cooling by applying a force directly to the nanoparticle and quadratic cooling by modulating the power of the trapping laser. I determine that cooling to mean phonon numbers of less than 10 with the current experimental setup is achievable utilising any of the feedback schemes described here when they are tuned appropriately.

•Jan 1, 2020•0 citations

Feedback cooling of a levitated nanoparticle in a radially polarized vector beam trap

Felipe Almeida, M. Rademacher, J. M. H. Gosling +1 more

We demonstrate optical levitation and feedback cooling of a silica nanoparticle (radius = 78~nm) trapped within a radial vector beam (RVB) in high vacuum. Radial vector beams, when focused by a high-NA lens, produce a smaller focal spot than conventional Gaussian beams, yielding tighter optical potentials and potentially reduced photon-recoil heating rates. A vortex wave plate was used to generate the RVB using an aspheric lens (NA = 0.77) to form the trap. Cold-damping feedback was used to cool the center of mass motion in the radial and axial trap directions to temperatures in the mK range. At higher temperatures and pressures, additional trap frequencies arising from the nonlinear RVB optical potential are observed. This demonstration is a step toward exploiting structured light for levitated quantum optomechanics where these traps can be used to suppress bulk and motional heating.

physics.opticsCross-listedarXiv:2609.31068•Sep 28, 2026•0 citations

Electric feedback cooling of single charged nanoparticles in an optical trap

M. Iwasaki, T. Yotsuya, Naruki Tsubasa +3 more

We demonstrate feedback cooling of the center-of-mass motion of single charged nanoparticles to millikelvin temperatures in three dimensions via applying oscillating electric fields synchronized to their optically observed motion. The observed motional temperatures at weak feedback agree with a simple model and allow us to estimate the charge number of trapped nanoparticles. The agreement between our model and experiments is confirmed by independent measurements of the charge numbers based on a shift in the oscillation frequency induced by a constant electric field. The demonstrated temperature of less than $10\phantom{\rule{0.16em}{0ex}}\mathrm{mK}$ at $4\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}3}\phantom{\rule{0.16em}{0ex}}\mathrm{Pa}$ is lower than that with the conventional optical cooling approach at this pressure by one to two orders of magnitude. Our results form the basis of manipulating cold charged nanoparticles and pave the way to quantum mechanical studies with trapped nanoparticles near their ground state.

arXiv:1812.01230•Physical Review A•May 16, 2019•31 citations

Subkelvin Parametric Feedback Cooling of a Laser-Trapped Nanoparticle

Jan Gieseler, Bradley Deutsch, Romain Quidant +1 more

We optically trap a single nanoparticle in high vacuum and cool its three spatial degrees of freedom by means of active parametric feedback. Using a single laser beam for both trapping and cooling we demonstrate a temperature compression ratio of four orders of magnitude. The absence of a clamping mechanism provides robust decoupling from the heat bath and eliminates the requirement of cryogenic precooling. The small size and mass of the nanoparticle yield high resonance frequencies and high quality factors along with low recoil heating, which are essential conditions for ground state cooling and for low decoherence. The trapping and cooling scheme presented here opens new routes for testing quantum mechanics with mesoscopic objects and for ultrasensitive metrology and sensing.

arXiv:1202.6435•Physical Review Letters•Sep 7, 2012•619 citations
The motion control of a levitated nanoparticle plays a central role in optical levitation for fundamental studies and practical applications. Here, we presented digital parametric feedback cooling based on square wave modulation by switching trapping laser intensity between two levels. The effects of the modulation depth and modulation signal phase on the cooling result were investigated in detail. Using such a digital parametric feedback method, the center-of-mass temperature of all three motional degrees of freedom can be cooled to dozens of millikelvin. The flexibility and agility of the digital feedback control pave the way for a variety of motion control modes.
Cooling the center-of-mass motion of levitated nanoparticles provides a route to quantum experiments at mesoscopic scales. Here we demonstrate three-dimensional sympathetic cooling and detection of the center-of-mass motion of a levitated silica nanoparticle. The nanoparticle is electrostatically coupled to a feedback-cooled particle while both particles are trapped in the same Paul trap. We identify two regimes, based on the strength of the cooling: in the first regime, the sympathetically cooled particle thermalizes with the directly cooled one, while in the second regime, the sympathetically cooled particle reaches a minimum temperature. This result provides a route to efficiently cool and detect particles that cannot be illuminated with strong laser light, such as absorptive particles, and paves the way for controlling the motion of arrays of several trapped nanoparticles.
Optically levitated systems provide an ideal environment for isolating objects extremely well from the environment such that their behaviour can be more easily studied without external influences. Moreover, using optical detection, very high levels of sensitivity to that behaviour can be achieved, allowing precise detection of their motion and measurement of forces upon such a system. In the experiment we describe in this thesis, one can construct an optical gradient force trap by simply directing a collimated light beam onto a parabolic mirror with a sufficiently high numerical aperture. The resulting focusing not only generates the optical trapping potential but also allows detection as a particle trapped at the focal spot of the mirror has the light it scatters onto the mirror collimated and sent back in the direction of the incident trapping light beam. The trap described here allows levitation of dielectric nanoparticles with radii from 10nm to 300nm at pressures from 103 —10-8 mbar. In this thesis I describe the experimental setup and the theory describing a particle levitated in this setup, detailing how, from the detected light intensity on a photodetector, we can extract the properties describing the physical system, including the frequency of motion, the damping upon the motion, the temperature associated with the motion, the radius of the trapped nanoparticle and the conversion factor which allows us to convert from the photo-current measured by the detector to the physical displacement of the particle. Cooling of the translational motion to the ground state is a much targeted goal in the field of levitated optomechanics as it has applications in producing quantum states, performing matter-wave interferometry, testing collapse models and as a very precise force sensor. In this thesis I demonstrate and investigate a number of different cooling methods applied to the translational motion. First, I describe how one can utilise an FIR (Finite Impulse Response) band-pass filter to isolate the signal due to the motion of a single translational degree of freedom and utilise this to perform active feedback cooling upon this degree of freedom. I demonstrate this by implementing an FIR filter on a FPGA (Field Programmable Gate Array) and utilising it in real-time to cool the motion to 2.5K ± 0.4 K. Secondly I utilise a tracking algorithm called a Kalman Filter, I describe how this algorithm functions to track the state of objects from noisy partial measurements of the state and how this can be applied to track levitated nanoparticles. I then detail how this was implemented in an FPGA so that the Kalman Filter could be used in real-time to estimate the position of a levitated nanoparticle. We demonstrate cooling of the translation centre-of-mass motion along the optical axis by 3 orders of magnitude to a temperature of 162mK ± 15 mK. Next I describe a classical model of the motion of a levitated nanoparticle and describe how this model can be simulated numerically to produce simulated time traces of the motion. I then demonstrate how this simulation can be used to reproduce several theoretical relations as well as reproduce experimental results and be utilised to simulate and test the performance of cooling algorithms without requiring experimental implementation. Next I use this simulation to model the effect of a Dung non-linearity in the trapping potential. I match the behaviour of the simulation when exposed to as a pulsed reduction of the laser power with the behaviour of the experimental system when exposed to the same stimulus and in doing so extract the Dung non-linearity in the optical trapping potential generated by the parabolic mirror, which takes a value of ξ = -0.100 m-2. Finally I describe a quantum model of the motion of a levitated nanosphere, which takes into account the various decoherence sources in the experimental system, namely the interaction with the background gas, the laser photons and decoherence due to the measurement. Using this I investigate several different forms of active feedback cooling, including the "optimal" cooling as determined from the tools of control theory, which takes the form of a square wave, and the more traditional sinusoidal feedback signal. In addition I compare both linear cooling by applying a force directly to the nanoparticle and quadratic cooling by modulating the power of the trapping laser. I determine that cooling to mean phonon numbers of less than 10 with the current experimental setup is achievable utilising any of the feedback schemes described here when they are tuned appropriately.
We demonstrate optical levitation and feedback cooling of a silica nanoparticle (radius = 78~nm) trapped within a radial vector beam (RVB) in high vacuum. Radial vector beams, when focused by a high-NA lens, produce a smaller focal spot than conventional Gaussian beams, yielding tighter optical potentials and potentially reduced photon-recoil heating rates. A vortex wave plate was used to generate the RVB using an aspheric lens (NA = 0.77) to form the trap. Cold-damping feedback was used to cool the center of mass motion in the radial and axial trap directions to temperatures in the mK range. At higher temperatures and pressures, additional trap frequencies arising from the nonlinear RVB optical potential are observed. This demonstration is a step toward exploiting structured light for levitated quantum optomechanics where these traps can be used to suppress bulk and motional heating.
We demonstrate feedback cooling of the center-of-mass motion of single charged nanoparticles to millikelvin temperatures in three dimensions via applying oscillating electric fields synchronized to their optically observed motion. The observed motional temperatures at weak feedback agree with a simple model and allow us to estimate the charge number of trapped nanoparticles. The agreement between our model and experiments is confirmed by independent measurements of the charge numbers based on a shift in the oscillation frequency induced by a constant electric field. The demonstrated temperature of less than 10mK10\phantom{\rule{0.16em}{0ex}}\mathrm{mK}10mK at $4\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}3}\phantom{\rule{0.16em}{0ex}}\mathrm{Pa}$ is lower than that with the conventional optical cooling approach at this pressure by one to two orders of magnitude. Our results form the basis of manipulating cold charged nanoparticles and pave the way to quantum mechanical studies with trapped nanoparticles near their ground state.
We optically trap a single nanoparticle in high vacuum and cool its three spatial degrees of freedom by means of active parametric feedback. Using a single laser beam for both trapping and cooling we demonstrate a temperature compression ratio of four orders of magnitude. The absence of a clamping mechanism provides robust decoupling from the heat bath and eliminates the requirement of cryogenic precooling. The small size and mass of the nanoparticle yield high resonance frequencies and high quality factors along with low recoil heating, which are essential conditions for ground state cooling and for low decoherence. The trapping and cooling scheme presented here opens new routes for testing quantum mechanics with mesoscopic objects and for ultrasensitive metrology and sensing.