arXiv:1902.10864 · Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference
29.1 A 28nm Bulk-CMOS 4-to-8GHz ¡2mW Cryogenic Pulse Modulator for Scalable Quantum Computing
Joseph C. Bardin, Evan Jeffrey, Erik Lucero, Trent Huang, Ofer Naaman, R. Barends, Ted White, Marissa Giustina, Daniel Sank, Pedram Roushan, Kunal Arya, Benjamin Chiaro, Julian Kelly, Jimmy Chen, Brian Burkett, Yu Chen, Andrew Dunsworth, Austin G. Fowler, Brooks Foxen, Craig Gidney, Rob Graff, Paul Klimov, Josh Mutus, Matthew McEwen, Anthony Megrant, Matthew Neeley, Charles Neill, Chris Quintana, Amit Vainsencher, Hartmut Neven, John M. Martinis
While quantum processors are typically cooled to1,000 physical qubits will be required to encode one error-corrected qubit [1]. Implementing a system with 1,000 error-corrected qubits will likely require moving from the contemporary paradigm where control and readout of the quantum processor is carried out using racks of room temperature electronics to one in which integrated control/readout circuits are located within the cryogenic environment and connected to the quantum processor through superconducting interconnects [2]. This is a major challenge, as the cryo ICs must be high performance and very low power (eventually <; 1 mW/qubit). In this paper, we report the design and system-level characterization of a prototype cryo-CMOS IC for performing XY gate operations on transmon (XMON) qubits.
While quantum processors are typically cooled to1,000 physical qubits will be required to encode one error-corrected qubit [1]. Implementing a system with 1,000 error-corrected qubits will likely require moving from the contemporary paradigm where control and readout of the quantum processor is carried out using racks of room temperature electronics to one in which integrated control/readout circuits are located within the cryogenic environment and connected to the quantum processor through superconducting interconnects [2]. This is a major challenge, as the cryo ICs must be high performance and very low power (eventually <; 1 mW/qubit). In this paper, we report the design and system-level characterization of a prototype cryo-CMOS IC for performing XY gate operations on transmon (XMON) qubits.
Implementation of an error-corrected quantum computer is believed to require a quantum processor with a million or more physical qubits, and, in order to run such a processor, a quantum control system of similar scale will be required. Such a controller will need to be integrated within the cryogenic system and in close proximity with the quantum processor in order to make such a system practical. Here, we present a prototype cryogenic CMOS quantum controller designed in a 28-nm bulk CMOS process and optimized to implement a 16-word (4-bit)XYgate instruction set for controlling transmon qubits. After introducing the transmon qubit, including a discussion of how it is controlled, design considerations are discussed, with an emphasis on error rates and scalability. The circuit design is then discussed. Cryogenic performance of the underlying technology is presented, and the results of several quantum control experiments carried out using the integrated controller are described. This article ends with a comparison to the state of the art and a discussion of further research to be carried out. It has been shown that the quantum control IC achieves promising performance while dissipating less than 2 mW of total ac and dc power and requiring a digital data stream of less than 500 Mb/s.
While large-scale fault-tolerant quantum computers promise to enable the solution to certain classes of problems for which no other efficient approach is known, such a machine is believed to require over a million performant qubits. Scaling today's 0(100) qubit superconducting (SC) quantum computers to this extent while also improving performance carries many daunting challenges, including control of such a large quantum processor (QP). Integrating the control electronics at an intermediate temperature stage within the cryostat is an attractive option, e.g., due to the inherent thermal stability of the cryogenic environment and the feasibility of connecting to the QP via dense low-loss/high-thermal-isolation SC lines [1], [2]. Several cryo-CMOS quantum controllers have been reported, with examples used to control spin [3] and transmon [1], [2] qubits. To date, IC-based quantum control experiments have focused on resonant RF control, but baseband signals are often central to the execution of gates. Here, we report the design and system characterization of a cryo-CMOS IC for generating both the RF and baseband signals required for full control of a SC QP unit-cell, and show its ability to implement the components of a high-fidelity gate set that is universal for quantum computing.
A universal fault-tolerant quantum computer will require large-scale control systems that can realize all the waveforms required to implement a gateset that is universal for quantum computing. Optimization of such a system, which must be precise and extensible, is an open research challenge. Here, we present a cryogenic quantum control integrated circuit (IC) that is able to control all the necessary degrees of freedom of a two-qubit subcircuit of a superconducting quantum processor. Specifically, the IC contains a pair of 4–8-GHz RF pulse generators forXYcontrol, three baseband current generators for qubit and coupler frequency control, and a digital controller that includes a sequencer for gate sequence playback. After motivating the architecture, we describe the circuit-level implementation details and present experimental results. Using standard benchmarking techniques, we show that the cryogenic CMOS (cryo-CMOS) IC is able to execute the components of a gateset that is universal for quantum computing while achieving single-qubitXYandZaverage gate error rates of 0.17%–0.36% and 0.14%–0.17%, respectively, as well as two-qubit average cross-entropy benchmarking (XEB) cycle error rates of 1.2%. These error rates, which were achieved while dissipating just 4 mW/qubit, are comparable to the measured error rates obtained using baseline room-temperature electronics.
A fault tolerant scalable quantum computer requires more than 1000 Qubits to perform real time state correction and to improve the Qubit coherence time. The dense wiring connections required between the quantum processor placed at a 100 mK temperature and the room temperature control and readout electronics serve as a limiting factor in this system. Qubit control and readout electronics operating at 4 K temperature, placed closer to a quantum processor inside the dilution refrigerator avoids the dense wiring connections to room temperature electronics, and hence, serve as a potential solution to realize a scalable quantum computer. However, with no CMOS process technology models available at cryogenic temperatures, the design of a fully integrated, ultra-low power Qubit control and readout electronics at a sub-1 mW power consumption proves to be extremely challenging. In recent years, there has been a huge rise in interest among the research communities to understand and solve the device and circuit level challenges at deep cryogenic temperatures. This paper presents an overview of the recently published active and passive device nonidealities, circuit design challenges and solutions, and the future research directions in the Qubit control and readout electronics operating at deep cryogenic temperatures.
Abstract Realizing a practically useful superconducting quantum computer will require a dramatic scale-up of quantum control electronics to meet the growth in required qubit counts. Conventional rack-based room-temperature control electronics impose severe constraints on wiring density, cost, and system footprint, creating a barrier to large-scale and fault-tolerant quantum computing. Here we demonstrate a hybrid quantum control architecture that combines cryogenic complementary metal-oxide semiconductor (cryo‑CMOS) application-specific integrated circuits (ASICs) for two‑qubit flux control with room‑temperature radio‑frequency electronics for single‑qubit control and readout. The resulting system achieves high density and scalable quantum control without compromising two‑qubit gate fidelity. Deployed on a 156‑qubit quantum processor, the cryo-CMOS subsystem achieves two‑qubit gate errors at the {10}^{-3} level, with a best randomized benchmarking error per gate of 8.4\times{10}^{-4}, stable operation over multi‑day timescales, and no measurable performance degradation as we increase the temperature of the cryo-CMOS ASICs from 7 to 20 K. Thermal analysis identifies cryo-CMOS chip operation near 20 K as a favorable regime, enabling efficient cooling of a large number of channels per cryostat. Compared against rack‑based flux-control, the cryo-CMOS subsystem achieves statistically indistinguishable two-qubit gate fidelities under matched gate settings and enables a tenfold improvement in system spatial footprint. These results establish cryo‑CMOS flux control as a practical and scalable foundation for large‑scale and fault-tolerant superconducting quantum systems.
Quantum computing promises to revolutionize our lives, achieving unprecedented computational powers and unlocking new possibilities in drug discovery, chemical simulations and cryptography. The fundamental unit of computation of a quantum computer is the quantum bit (qubit). It can be implemented in a number of technologies, such as superconducting qubits, spin qubits, photonic systems, trapped ions and NV-centers. Solid-state superconducting qubits and spin qubits seem to be the most promising ones, as shown by the recent demonstration of quantum supremacy with a superconducting qubit processor. Such quantum processors, to operate in the quantum regime, require very low temperatures around 10 mK, and they are hence kept inside dilution fridges. The electronics required to read out and control such processors is typically realized by discrete components or bulky scientific instruments at room temperature wired into the dilution fridge. Such approach is only feasible until few (< 100) qubits are handled, but it is not scalable for million-qubit processors required for fault-tolerant operation. In this thesis, readout and control electronics is proposed to be integrated and operated directly at cryogenic temperatures, in close proximity with the qubits and potentially even co-integrated. CMOS technology is advocated for its scalability, compactness and low prototyping cost, to create a comprehensive cryo-CMOS class of fully-integrated transceivers to read out and control solid-state qubits. In particular, the thesis focuses on cryo-CMOS radio-frequency integrated circuits for the readout of silicon quantum computers, looking to integrate the whole readout system, from the quantum layer to the room temperature user interface. Cryogenic CMOS devices are explored first, to lay the foundations of integrated circuit design. The realization of quantum dots in standard CMOS technology is explored as a platform to realize solid-state qubit arrays, demonstrating functionality at 50 mK and good reproducibility. Moreover, the operation of integrated transistors at 50 mK and 4.2 K is explored to understand their basic cryogenic functionality, through characterization and modeling. Then also integrated passives, such as capacitors, inductors and transformers, are studied and modeled at cryogenic temperatures. Then, a fully-integrated readout platform spanning across all the blocks needed for dispersive readout is proposed. A fully-integrated matrix of quantum dots with radio-frequency gate-based readout capabilities is demonstrated along with time- and frequency-multiplexing. This quantum-classical circuit shows all the features for a scalable approach and is the core of the platform following it. A cryogenic CMOS circulator based on a new all-pass filter architecture is demonstrated, to be used as integrated replacement for current bulky counterparts; it allows power reduction, insertion loss and bandwidth enhancement with respect to state-of-the-art integrated circulators. The rest of the front-end is also explored with dedicated test multiplexers, a low noise-amplifier and an oscillator, that are finally merged in a single fully-integrated low-noise receiver with frequency synthesizer operating at 3.5 K for scalable multiplexed readout of silicon qubits. The platform presented in this thesis, across temperature boundaries, carries all the features required for future scalable silicon quantum computing platforms and could therefore form their core.