Quantum-limited Josephson parametric amplifiers are crucial components in readout chains for circuit quantum electrodynamics. The power handling of state-of-the-art parametric amplifiers is limited by signal-induced Stark shifts. The authors use an innovative circuit element with a Stark-shift-free sweet spot in parameter space to boost the power handling of such an amplifier by an order of magnitude, which is quite promising for the implementation of bilinear Hamiltonians with high dynamic range in quantum information processing.
Quantum-limited Josephson parametric amplifiers are crucial components in readout chains for circuit quantum electrodynamics. The power handling of state-of-the-art parametric amplifiers is limited by signal-induced Stark shifts. The authors use an innovative circuit element with a Stark-shift-free sweet spot in parameter space to boost the power handling of such an amplifier by an order of magnitude, which is quite promising for the implementation of bilinear Hamiltonians with high dynamic range in quantum information processing.
One of the primary requirements for superconducting quantum information processors is high-fidelity, quantum non-demolition qubit readout. In superconducting circuits, we perform measurements with quantum-limited microwave amplifiers. These amplifiers are based on microwave cavities and powered by Josephson-junction based nonlinearities, which we drive to parametrically modulate the circuit and generate gain. However, cavity-based amplifiers generally suffer from a fixed gain-bandwidth product, a limited dynamic range, and the absence of directionality, and so they must be operated with external lossy microwave commercial components such as circulators. Many of these limitations can be circumvented by combining multiple parametric processes in a few-mode device, in particular by combining parametric drives which produce gain and those which produce gainless photon conversion. By combining balanced gain and conversion processes between a pair of modes, we have demonstrated transmission-only, phase-sensitive, gain-bandwidth-free amplification. We have also used measurements of transmon qubits with this mode of amplification to demonstrate its practical utility. More, by combining multiple instances of imbalanced gain and conversion processes among three modes, we have realized devices with non-reciprocal, transmission-only amplification, matched ports, and a large, gain-independent bandwidth. One of the biggest challenges in tuning multiple parametric processes is both inherent and dynamically-generated higher order nonlinearities in the device, which shift mode frequencies and parametric coupling strengths with pump power, preventing accurate balancing of the parametric processes. These can be controlled through engineering the Hamiltonian of the nonlinear element, in this thesis either a linearly-shunted Josephson Ring Modulator or SNAIL (Superconducting Nonlinear Asymmetric Inductive eLements), which for certain applied flux values can minimize or even change the sign of higher-order even nonlinearities. Additionally, we have explored a range of circuit parameters, allowing us to also control the relative size of odd-order nonlinearities. We have developed a series of prototypes which implement these concepts, and have achieved both high-dynamic range singly pumped amplifiers, and a promising platform for multi-parametric devices. We conclude by presenting recent progress towards implementing multiple parametric schemes that generates a practical directional amplifier, and discuss the remaining obstacles to a truly ideal parametric amplifiers.
Parametric conversion and amplification based on three-wave mixing are powerful primitives for efficient quantum operations. For superconducting qubits, such operations can be realized with a quadrupole Josephson junction element, the Josephson Ring Modulator, which behaves as a loss-less three-wave mixer. However, combining multiple quadrupole elements is a difficult task so it would be advantageous to have a three-wave dipole element that could be tessellated for increased power handling and/or information throughput. Here, we present a dipole circuit element with third-order nonlinearity, which implements three-wave mixing. Experimental results for a non-degenerate amplifier based on the proposed third-order nonlinearity are reported.
Quantum computing with superconducting circuits relies on high-fidelity driven nonlinear processes. An ideal quantum nonlinearity would selectively activate desired coherent processes at high strength, without activating parasitic mixing products or introducing additional decoherence. The wide bandwidth of the Josephson nonlinearity makes this difficult, with undesired drive-induced transitions and decoherence limiting qubit readout, gates, couplers, and amplifiers. Significant strides have recently been made into building better “quantum mixers,” with promise being shown by Kerr-free three-wave mixers that suppress driven frequency shifts, and balanced quantum mixers that explicitly forbid a significant fraction of parasitic processes. We propose a novel mixer that combines both these strengths, with engineered selection rules that make it essentially linear (not just Kerr-free) when idle, and activate clean parametric processes even when driven at high strength. Furthermore, its ideal Hamiltonian is simple to analyze analytically, and we show that this ideal behavior is first-order insensitive to dominant experimental imperfections. We expect this mixer to allow significant advances in high- Q control, readout, and amplification.
Feedback control in classical systems is an indispensable, ubiquitous tool. The theoretical basis for achieving optimal classical control is well understood, and crucially relies on a very classical assumption: that measurements of the state of a system under control need not perturb that state. In a quantum context this assumption is fundamentally invalid. Although many aspects of the theory of quantum feedback control are relatively well developed, the technological basis for feedback control of a single quantum system has only very recently matured. We demonstrate the experimental realization of a quantum feedback control protocol, perpetually stabilizing the coherent Rabi oscillations of a superconducting qubit. This is the first utilization of quantum feedback control for stabilizing a dynamical process, and the first application of quantum feedback in a solid-state system of any kind. This demonstration comprises the first half of this thesis. The feedback protocol is predicated on the ability to make high-fidelity quantum measurements, which are enabled by quantum-limited Josephson parametric amplifiers (JPAs). The design and realization of the novel Josephson traveling-wave parametric amplifier (JTWPA) comprises the second half of this thesis. The JTWPA achieves order-of-magnitude improvements over state of the art JPAs in bandwidth and signal power handling while providing quantum-limited noise performance, potentially enabling the simultaneous readout of dozens of superconducting qubits and the generation of broadband multi-mode squeezing in the microwave domain.
Nearly quantum limited Josephson parametric amplifiers (JPAs) are essential components in superconducting quantum circuits. However, higher order nonlinearities of the Josephson cosine potential are known to cause gain compression, therefore limiting scalability. In an effort to reduce the fourth order, or Kerr nonlinearity, we realize a parametric amplifier with an Al-InAs superconductor–semiconductor hybrid Josephson junction (JJ). We extract the Kerr nonlinearity of the Al-InAs JJ from two different devices and show that it is three orders of magnitude lower compared to an Al-AlOX junction with identical Josephson inductance. We then demonstrate a four-wave-mixing (4WM) parametric amplifier made with an Al-InAs junction that achieves more than 20 dB of gain and −119 dBm of compression power, which outperforms single resonant JPAs based on Al junctions.
Feedback control in classical systems is an indispensable, ubiquitous tool. The theoretical basis for achieving optimal classical control is well understood, and crucially relies on a very classical assumption: that measurements of the state of a system under control need not perturb that state. In a quantum context this assumption is fundamentally invalid. Although many aspects of the theory of quantum feedback control are relatively well developed, the technological basis for feedback control of a single quantum system has only very recently matured. We demonstrate the experimental realization of a quantum feedback control protocol, perpetually stabilizing the coherent Rabi oscillations of a superconducting qubit. This is the first utilization of quantum feedback control for stabilizing a dynamical process, and the first application of quantum feedback in a solid-state system of any kind. This demonstration comprises the first half of this thesis. The feedback protocol is predicated on the ability to make high-fidelity quantum measurements, which are enabled by quantum-limited Josephson parametric amplifiers (JPAs). The design and realization of the novel Josephson traveling-wave parametric amplifier (JTWPA) comprises the second half of this thesis. The JTWPA achieves order-of-magnitude improvements over state of the art JPAs in bandwidth and signal power handling while providing quantum-limited noise performance, potentially enabling the simultaneous readout of dozens of superconducting qubits and the generation of broadband multi-mode squeezing in the microwave domain.