The inexorable miniaturisation of technologies, the relentless drive to improve efficiency and the enticing prospect of boosting performance through quantum effects are all compelling reasons to investigate microscopic machines. Thermal absorption machines are a particularly interesting class of device that operate autonomously and use only heat flows to perform a useful task. In the quantum regime, this provides a natural setting in which to quantify the thermodynamic cost of various operations such as cooling, timekeeping or entanglement generation. This article presents a pedagogical introduction to the physics of quantum absorption machines, covering refrigerators, engines and clocks in detail.
The inexorable miniaturisation of technologies, the relentless drive to improve efficiency and the enticing prospect of boosting performance through quantum effects are all compelling reasons to investigate microscopic machines. Thermal absorption machines are a particularly interesting class of device that operate autonomously and use only heat flows to perform a useful task. In the quantum regime, this provides a natural setting in which to quantify the thermodynamic cost of various operations such as cooling, timekeeping or entanglement generation. This article presents a pedagogical introduction to the physics of quantum absorption machines, covering refrigerators, engines and clocks in detail.
Thermodynamics is a branch of science blessed by an unparalleled combination of generality of scope and formal simplicity. Based on few natural assumptions together with the four laws, it sets the boundaries between possible and impossible in macroscopic aggregates of matter. This triggered groundbreaking achievements in physics, chemistry and engineering over the last two centuries. Close analogues of those fundamental laws are now being established at the level of individual quantum systems, thus placing limits on the operation of quantum-mechanical devices. Here we study quantum absorption refrigerators, which are driven by heat rather than external work. We establish thermodynamic performance bounds for these machines and investigate their quantum origin. We also show how those bounds may be pushed beyond what is classically achievable, by suitably tailoring the environmental fluctuations via quantum reservoir engineering techniques. Such superefficient quantum-enhanced cooling realises a promising step towards the technological exploitation of autonomous quantum refrigerators.
Thermodynamics is a branch of science blessed by an unparalleled combination of generality of scope and formal simplicity. Based on few natural assumptions together with the four laws, it sets the boundaries between possible and impossible in macroscopic aggregates of matter. This triggered groundbreaking achievements in physics, chemistry and engineering over the last two centuries. Close analogues of those fundamental laws are now being established at the level of individual quantum systems, thus placing limits on the operation of quantum-mechanical devices. Here we study quantum absorption refrigerators, which are driven by heat rather than external work. We establish thermodynamic performance bounds for these machines and investigate their quantum origin. We also show how those bounds may be pushed beyond what is classically achievable, by suitably tailoring the environmental fluctuations via quantum reservoir engineering techniques. Such superefficient quantum-enhanced cooling realises a promising step towards the technological exploitation of autonomous quantum refrigerators.
The study of nanoscopic thermal devices attracts an increasing attention, not only because of their key role in understanding the emergence of thermodynamics from quantum theory, but also for the potential use of quantum-mechanical thermal cycles, especially refrigerators, in quantum technologies. This thesis, is devoted to the performance optimization of autonomous (heat-driven) refrigerators. For a quantum refrigerator, one has a full microscopic description of the simple system serving as a working medium, and of its interaction with the external heat baths. This enables a consistent `finite-time? thermodynamic analysis, not relying on any phenomenological assumptions about the leading sources of irreversibility, and allows to establish arguably general performance bounds, essential to benchmark the operation of realistic devices. In particular, tight and model-independent upper bounds for the coefficient of performance at maximum power, are derived here for a class of strongly coupled refrigerators, and seen to hold more generally for other types of heat and power-driven cycles. Remarkably, these ultimate limitations only depend on the particulars of the system-baths interaction at the interface with the object to be cooled. Strategies might be then defined so as to saturate those limits: It is shown how the working medium of the refrigerator may be, for instance, scaled up into a parallel multi-stage configuration, resembling that of macroscopic multi-effect absorption chillers, as a means to increase its cooling power. Similarly, by applying reservoir engineering techniques on selected transitions between the energy states of the working medium, one can mimic exploitable non-equilibrium fluctuations in the baths, capable of boosting the overall power and COP beyond what would be otherwise allowed by the second law of thermodynamics. In this way, heat-driven chillers could be set to compete on a equal footing with the best power-driven refrigerators.
We use the theory of open quantum systems to study quantum thermal machines, deriving their master equations to understand how they evolve in time. We consider three different working substances coupled to heat baths that may act as engines, refrigerators, accelerators or dissipators. The first is a network of driven quantum harmonic oscillators where we study the effect that the driving speed has on the operation of the system. We see how squeezing one of the baths may lead to a more efficient engine as well as the generation of entanglement within the system. We then investigate the use of coherence in the baths as a resource to improve the performance of a quantum thermal machine whose working substance consists of a single qubit. Finally, we introduce a rotor to a system of two qubits to create an autonomous quantum machine capable of converting heat flow into useful mechanical work. We also study both the heat and angular momentum rectification that may be accomplished by this machine.
Quantum mechanics has given us a new playground in which to experiment that boasts several unique features. In this thesis, we explore it in the context of thermodynamics: looking at what kind of thermal devices can be constructed and how quantum behaviour affects them. We consider three research strands. In the first part we formulate a selection of heat engines with two-qubit systems, utilising environments that induce quantum correlations into the system. We see that these correlations can have some effects on the work of the engine, but this effect is system dependent. Describing the dynamics of a quantum system in contact with an external environment is often achieved with a master equation. When considering systems comprised of multiple subsystems, the description becomes more complicated and some of the master equations that have been used previously produce unphysical results. In the second part of this thesis we show that if one does the proper analysis of the microscopic derivation of these master equations, then no thermodynamical inconsistencies occur. When one considers a system connected to three or more environments, a whole new set of possible thermodynamical machines becomes available. One notable case of these is the absorption refrigerator, which performs refrigeration without the need for an external work source. For the third part, we show how one can construct an absorption refrigerator using a three-qubit system with two-body interactions and describe its operation. We also show some thermal control properties of the three-qubit system.
Continuous particle exchange thermal machines require no time-dependent driving, can be realised in solid-state electronic devices, and miniaturised to nanometre scale. Quantum dots, providing a narrow energy filter and allowing to manipulate particle flow between the hot and cold reservoirs are at the heart of such devices. It has been theoretically shown that by mitigating passive heat flow, Carnot efficiency can be approached arbitrarily closely in a quantum dot heat engine, and experimentally, values of 0.7ηC have been reached. However, for practical applications, other parameters of a thermal machine, such as maximum power, efficiency at maximum power, and noise - stability of the power output or heat extraction - take precedence over maximising efficiency. We explore the effect of internal microscopic dynamics of a quantum dot on these quantities and demonstrate that its performance as a thermal machine depends on few parameters - the overall conductance and three inherent asymmetries of the dynamics. These parameters will act as a guide to engineering the quantum states of the quantum dot, allowing to optimise its performance beyond that of the simplest case of a two-fold spin-degenerate transmission level.