Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1901.08265 · Journal of the Optical Society of America B

Broadband lasers for photo-ionization and repumping of trapped ions

Thomas Fordell, Thomas Lindvall

Published Jan 23, 2019• 1 citation
arXivHTMLPDF

Abstract

A frequency-stable, broadband laser is presented for experiments on trapped ions. Because the design is based on widely available semiconductor optical amplifier technology, similar lasers can be realized for virtually any wavelength in the near-infrared, and the coherence properties and output power allow for efficient second harmonic generation. No closed-loop frequency stabilization for addressing Doppler- or naturally broadened, dipole-allowed transitions is needed, and the light source can be turned on and off during a measurement cycle with submicrosecond response time. As a case study, a 921.7-nm laser with an output power of 20 mW and a linewidth of 10 GHz is realized, which is then frequency doubled to 460.9 nm for excitation of strontium as the first step in photo-ionization. The excitation efficiency is compared to that achievable with a narrow-linewidth distributed Bragg reflector laser as well as to theory.

DOI
10.1364/josab.36.000415

Related papers

Broadband, unpolarized repumping and clearout light sources for Sr^+ single-ion clocks

T. Fordell, T. Lindvall, P. Dubé +3 more

Future transportable optical clocks require compact and reliable light sources. Here, broadband, unpolarized repumper and state clearout sources for Sr+ single-ion optical clocks are reported. These turn-key devices require no frequency stabilization or external modulators. They are fiber based, inexpensive, and compact. Key characteristics for clock operation are presented, including optical spectra, induced light shifts, and required extinction ratios. Tests with an operating single-ion standard show a clearout efficiency of 100%. Compared to a laser-based repumper, the achievable fluorescence rates for ion detection are a few tens of percent lower. The resulting ion kinetic temperature is 1–1.5 mK, near the Doppler limit of the ion system. Similar repumper light sources could be made for Ca+ (866 nm) and Ba+ (650 nm) using semiconductor gain media.

arXiv:1504.04443•Optics Letters•Apr 11, 2015•17 citations

Development of diode and fiber laser sources for a Sr+trapped-ion optical frequency standard

G. P. Barwood, C. S. Edwards, Patrick Robert Gill +2 more

The development of an all-solid-state systems of lasers is described for the cooling and probing of strontium ions in a radio-frequency (rf) trap. The Sr+ ions created within the rf trap are laser cooled by repeated cycling on the 422 nm 2S1/2 - 2P1/2 resonance transition. The 422 nm light was generated from a single mode 70 mW 844 nm diode laser, whose output was frequency doubled to 422 nm in a KNbO3 crystal inside a resonant enhancement cavity. Decays from the Sr+ upper resonance level into the 2D3/2 metastable state remove ions from the cooling cycle. This loss was prevented by driving the 1092 nm 2D3/2 - 2P1/2 transition using a Nd3+-doped fiber laser, diode-pumped at 826 nm. The 2S1/2 - 2D5/2 optical 'clock' transition at 674 nm has a natural linewidth of 0.4 Hz and may be probed with an AlGaInP laser diode. The laser diodes at 844 nm and 674 nm are both collimated using a piezo-mounted GRIN rod which also provides longitudinal mode selection. The spectral output is optically narrowed using resonant optical feedback.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 30, 1993•8 citations

Multiwavelength narrow linewidth laser system for Ba+ quantum computing applications

Kostiantyn Nechay, Luukas Kuusela, Pekko Sipilä +2 more

Quantum information processing (QIP) approach based on trapped ions is a promising technology that exploits different ion species as individual qubits and qubit gates, while featuring long coherence times, high fidelity of operations, fast readout, and ion-ion gate entanglement. The practical usefulness of trapped-ion quantum computer depends on its further scaling to a large number of qubits. Meanwhile, trapped-ion quantum computer relies on a set of single-frequency lasers, utilizing them for different functions such as photoionization, atom cooling, optical pumping and qubit operations. Thus, a combination of narrow linewidth lasers is required, with the emission wavelengths precisely defined by the corresponding electronic transitions of the selected ion species. Further development, scalability and commercialization of quantum information technologies is interwind with the availability of affordable and robust single-frequency lasers on a variety of application-specific wavelengths. QIP manifests strict requirements posed to lasers in terms of central wavelength, linewidth, long-term stability, beam quality, polarization extinction ratio, side-mode suppression ratio, etc. In this work we present the development and characterization of multiwavelength narrow linewidth system designed for the Ba+ trapped ion computing. The laser system emits single-frequency, sub-MHz emission at 553 nm, 493 nm and 614 nm based on second-harmonic generation of two separate semiconductor laser platforms. Two-step photoionization of neutral Ba is implemented resonantly through 6s2 1S0 → 6s6p 1P1 transition corresponding to 553 nm wavelength, whereas Ba ion is Doppler cooled on 6S1/2 →6P1/2 transition corresponding to 493 nm. Such single-frequency greenyellow and cyan lasers are based on intracavity frequency doubled vertical-external-cavity surface-emitting laser (VECSEL), serving as an effective replacement of the legacy dye laser, previously used to address these Ba transition. On the other hand, frequency doubled external cavity diode laser (ECDL) is employed to generate 614 nm orange emission needed for 5D5/2→ 6P3/2 transition. The laser system incorporates modular laser engines together with low-noise driving electronics, mechanical and acoustic concealment and provide laser locking interfaces to high-finesse optical cavity or a wavemeter.

Quantum Computing, Communication, and Simulation•Mar 12, 2024•0 citations

Blue laser for precision spectroscopy: toward optical frequency standard referenced to laser cooled calcium atoms

Vera Grishina

Optical frequency standards with the reference to a narrow electronic transition of a laser-cooled collection of neutral atomic particles are becoming essential tools of research in modern precision physics experiments. In the core of a building block of an optical frequency standard is the optical continuous wave laser that has a good spectral purity of the emitted light. Such a stable optical oscillator is highly desirable in high resolution spectroscopy, if it emits in a good quality beam at a short visible wavelength. This Master thesis explores efficient techniques for building such an optical frequency source intended for use in the cooling and trapping of Calcium atoms scheme. The strong dipole transition at the blue wavelength in the atomic Calcium is needed to reduce the kinetic energy of atoms by nearly six orders of magnitude. A further reduction in the thermal energy of the laser cooled atoms is required to locate with ultra-high precision the 400 Hz narrow clock transition of the stable 40Ca isotope. The experimental methods that achieve this and approach sub-microkelvin temperature of the laser cooled bosonic isotopes of alkaline earths are inspected. The blue laser with a uniform intensity distribution in the beam is useful to maintain the trapped number of cold atoms during these experiments. The spectroscopic properties of the relative transitions in Calcium atom are also reviewed following relevant publications in the area. The constructed blue laser can be used as a primary wavelength source in the lasers network for cooling and trapping of Calcium atoms. These experiments will constitute part of the project to build an optical atom clock referenced to 40Ca narrow linewidth transition. The blue laser is constructed by generating second harmonic in a Potassium Niobate crystal, which is temperature controlled to use a type-I noncritical phase-matching of the optical nonlinear process. The power of the intracavity-generated second harmonic depends on the resonance properties of the optical resonator where this nonlinear crystal is placed. The study is aimed at characterising the designed optical resonator and the experimental parameters that describe it. The formula is derived that relates the resonance power enhancement coefficient with finesse and the power coupling contrast of a passive optical cavity. The obtained relationship is verfied during the experiments. The produced efficiency of the intracavity second harmonic generation is approx. 0.0023 mWblue/(mWred)2. The research work also examines the noise characteristics of the infrared diode laser that is used as a pump source for the intracavity generated second harmonic and determines the spectroscopic precision of the produced blue light. The frequency locking experiment is analysed using the unbalanced scheme of the polarisation stabilisation technique. The designed optical buildup cavity became a part of the unbalanced frequency discriminator in such a scheme. The results demonstrate high gain of frequency noise suppression of the stabilised laser. The unbalanced arrangement of the H}ansch-Couillaud technique has been possible due to a very low amplitude noise of semiconductor lasers.

•Jan 1, 2008•0 citations

Laser frequency stabilization for trapped Yb+ experiments

Janse van Rensburg, Deon Anton

This project sets out to frequency stabilize external cavity diode lasers of wavelengths λ = 935 nm and 739 nm, with an eye to Ytterbium-171 ion trapping.The desired laser linewidths were below 1 MHz at 1 second observation time and the desired long term frequency drifts were below a megahertz over the course of a few hours.To stabilize the lasers, two Pound-Drever-Hall laser frequency stabilisation systems were designed, constructed and characterized.The optical frequency references used were sub-megahertz linewidth optical cavities with Invar spacers.These cavities were designed and constructed inhouse.The achieved long term stability of the stabilized lasers was 1 MHz/h over a 5 hour measurement period.The laser frequency long term stabilities are limited by the thermal stabilities of the cavity spacers.The post stabilisation laser frequency noise was lowered when compared to the free running lasers.This was observed by determining the laser frequency noise power spectral densities.From the frequency noise power spectral densities lower bounds on the locked laser linewidths were established.This lower bound is 11.92 kHz for the 739 nm wavelength laser at 1 second observation time and 5.4 kHz for the 935 nm wavelength laser.An additional system was designed and constructed ii

•Dec 1, 2020•0 citations

Laser system for Doppler cooling of ytterbium ion in an optical frequency standard

S. V. Chepurov, A.A. Lugovoy, S N Kuznetsov

A laser system for Doppler cooling of ytterbium ion on the transition in a single-ion optical frequency standard is developed. The second harmonic of a semiconductor laser with a wavelength of is used for cooling. The laser frequency is doubled in a nonlinear BiBO crystal embedded in a ring resonator, which also serves as a reference for laser frequency stabilisation. Second-harmonic power of is generated at a wavelength of . Diode laser radiation is modulated by an electro-optic modulator at to generate a sideband exciting the hyperfine component of the cooling transition that is not excited by resonant cooling light. The sideband relative intensity of a few percent proved to be sufficient to reduce the ion dwelling time in the state to less than and increase the cooling efficiency.

Quantum Electronics•Jun 30, 2014•3 citations
A frequency-stable, broadband laser is presented for experiments on trapped ions. Because the design is based on widely available semiconductor optical amplifier technology, similar lasers can be realized for virtually any wavelength in the near-infrared, and the coherence properties and output power allow for efficient second harmonic generation. No closed-loop frequency stabilization for addressing Doppler- or naturally broadened, dipole-allowed transitions is needed, and the light source can be turned on and off during a measurement cycle with submicrosecond response time. As a case study, a 921.7-nm laser with an output power of 20 mW and a linewidth of 10 GHz is realized, which is then frequency doubled to 460.9 nm for excitation of strontium as the first step in photo-ionization. The excitation efficiency is compared to that achievable with a narrow-linewidth distributed Bragg reflector laser as well as to theory.
Future transportable optical clocks require compact and reliable light sources. Here, broadband, unpolarized repumper and state clearout sources for Sr+ single-ion optical clocks are reported. These turn-key devices require no frequency stabilization or external modulators. They are fiber based, inexpensive, and compact. Key characteristics for clock operation are presented, including optical spectra, induced light shifts, and required extinction ratios. Tests with an operating single-ion standard show a clearout efficiency of 100%. Compared to a laser-based repumper, the achievable fluorescence rates for ion detection are a few tens of percent lower. The resulting ion kinetic temperature is 1–1.5 mK, near the Doppler limit of the ion system. Similar repumper light sources could be made for Ca+ (866 nm) and Ba+ (650 nm) using semiconductor gain media.
The development of an all-solid-state systems of lasers is described for the cooling and probing of strontium ions in a radio-frequency (rf) trap. The Sr+ ions created within the rf trap are laser cooled by repeated cycling on the 422 nm 2S1/2 - 2P1/2 resonance transition. The 422 nm light was generated from a single mode 70 mW 844 nm diode laser, whose output was frequency doubled to 422 nm in a KNbO3 crystal inside a resonant enhancement cavity. Decays from the Sr+ upper resonance level into the 2D3/2 metastable state remove ions from the cooling cycle. This loss was prevented by driving the 1092 nm 2D3/2 - 2P1/2 transition using a Nd3+-doped fiber laser, diode-pumped at 826 nm. The 2S1/2 - 2D5/2 optical 'clock' transition at 674 nm has a natural linewidth of 0.4 Hz and may be probed with an AlGaInP laser diode. The laser diodes at 844 nm and 674 nm are both collimated using a piezo-mounted GRIN rod which also provides longitudinal mode selection. The spectral output is optically narrowed using resonant optical feedback.
Quantum information processing (QIP) approach based on trapped ions is a promising technology that exploits different ion species as individual qubits and qubit gates, while featuring long coherence times, high fidelity of operations, fast readout, and ion-ion gate entanglement. The practical usefulness of trapped-ion quantum computer depends on its further scaling to a large number of qubits. Meanwhile, trapped-ion quantum computer relies on a set of single-frequency lasers, utilizing them for different functions such as photoionization, atom cooling, optical pumping and qubit operations. Thus, a combination of narrow linewidth lasers is required, with the emission wavelengths precisely defined by the corresponding electronic transitions of the selected ion species. Further development, scalability and commercialization of quantum information technologies is interwind with the availability of affordable and robust single-frequency lasers on a variety of application-specific wavelengths. QIP manifests strict requirements posed to lasers in terms of central wavelength, linewidth, long-term stability, beam quality, polarization extinction ratio, side-mode suppression ratio, etc. In this work we present the development and characterization of multiwavelength narrow linewidth system designed for the Ba+ trapped ion computing. The laser system emits single-frequency, sub-MHz emission at 553 nm, 493 nm and 614 nm based on second-harmonic generation of two separate semiconductor laser platforms. Two-step photoionization of neutral Ba is implemented resonantly through 6s2 1S0 → 6s6p 1P1 transition corresponding to 553 nm wavelength, whereas Ba ion is Doppler cooled on 6S1/2 →6P1/2 transition corresponding to 493 nm. Such single-frequency greenyellow and cyan lasers are based on intracavity frequency doubled vertical-external-cavity surface-emitting laser (VECSEL), serving as an effective replacement of the legacy dye laser, previously used to address these Ba transition. On the other hand, frequency doubled external cavity diode laser (ECDL) is employed to generate 614 nm orange emission needed for 5D5/2→ 6P3/2 transition. The laser system incorporates modular laser engines together with low-noise driving electronics, mechanical and acoustic concealment and provide laser locking interfaces to high-finesse optical cavity or a wavemeter.
Optical frequency standards with the reference to a narrow electronic transition of a laser-cooled collection of neutral atomic particles are becoming essential tools of research in modern precision physics experiments. In the core of a building block of an optical frequency standard is the optical continuous wave laser that has a good spectral purity of the emitted light. Such a stable optical oscillator is highly desirable in high resolution spectroscopy, if it emits in a good quality beam at a short visible wavelength. This Master thesis explores efficient techniques for building such an optical frequency source intended for use in the cooling and trapping of Calcium atoms scheme. The strong dipole transition at the blue wavelength in the atomic Calcium is needed to reduce the kinetic energy of atoms by nearly six orders of magnitude. A further reduction in the thermal energy of the laser cooled atoms is required to locate with ultra-high precision the 400 Hz narrow clock transition of the stable 40Ca isotope. The experimental methods that achieve this and approach sub-microkelvin temperature of the laser cooled bosonic isotopes of alkaline earths are inspected. The blue laser with a uniform intensity distribution in the beam is useful to maintain the trapped number of cold atoms during these experiments. The spectroscopic properties of the relative transitions in Calcium atom are also reviewed following relevant publications in the area. The constructed blue laser can be used as a primary wavelength source in the lasers network for cooling and trapping of Calcium atoms. These experiments will constitute part of the project to build an optical atom clock referenced to 40Ca narrow linewidth transition. The blue laser is constructed by generating second harmonic in a Potassium Niobate crystal, which is temperature controlled to use a type-I noncritical phase-matching of the optical nonlinear process. The power of the intracavity-generated second harmonic depends on the resonance properties of the optical resonator where this nonlinear crystal is placed. The study is aimed at characterising the designed optical resonator and the experimental parameters that describe it. The formula is derived that relates the resonance power enhancement coefficient with finesse and the power coupling contrast of a passive optical cavity. The obtained relationship is verfied during the experiments. The produced efficiency of the intracavity second harmonic generation is approx. 0.0023 mWblue/(mWred)2. The research work also examines the noise characteristics of the infrared diode laser that is used as a pump source for the intracavity generated second harmonic and determines the spectroscopic precision of the produced blue light. The frequency locking experiment is analysed using the unbalanced scheme of the polarisation stabilisation technique. The designed optical buildup cavity became a part of the unbalanced frequency discriminator in such a scheme. The results demonstrate high gain of frequency noise suppression of the stabilised laser. The unbalanced arrangement of the H}ansch-Couillaud technique has been possible due to a very low amplitude noise of semiconductor lasers.
This project sets out to frequency stabilize external cavity diode lasers of wavelengths λ = 935 nm and 739 nm, with an eye to Ytterbium-171 ion trapping.The desired laser linewidths were below 1 MHz at 1 second observation time and the desired long term frequency drifts were below a megahertz over the course of a few hours.To stabilize the lasers, two Pound-Drever-Hall laser frequency stabilisation systems were designed, constructed and characterized.The optical frequency references used were sub-megahertz linewidth optical cavities with Invar spacers.These cavities were designed and constructed inhouse.The achieved long term stability of the stabilized lasers was 1 MHz/h over a 5 hour measurement period.The laser frequency long term stabilities are limited by the thermal stabilities of the cavity spacers.The post stabilisation laser frequency noise was lowered when compared to the free running lasers.This was observed by determining the laser frequency noise power spectral densities.From the frequency noise power spectral densities lower bounds on the locked laser linewidths were established.This lower bound is 11.92 kHz for the 739 nm wavelength laser at 1 second observation time and 5.4 kHz for the 935 nm wavelength laser.An additional system was designed and constructed ii
A laser system for Doppler cooling of ytterbium ion on the transition in a single-ion optical frequency standard is developed. The second harmonic of a semiconductor laser with a wavelength of is used for cooling. The laser frequency is doubled in a nonlinear BiBO crystal embedded in a ring resonator, which also serves as a reference for laser frequency stabilisation. Second-harmonic power of is generated at a wavelength of . Diode laser radiation is modulated by an electro-optic modulator at to generate a sideband exciting the hyperfine component of the cooling transition that is not excited by resonant cooling light. The sideband relative intensity of a few percent proved to be sufficient to reduce the ion dwelling time in the state to less than and increase the cooling efficiency.