Mechanical modes are a potentially useful resource for quantum information applications, such as quantum-level wavelength transducers, due to their ability to interact with electromagnetic radiation across the spectrum. A significant challenge for wavelength transducers is thermomechanical noise in the mechanical mode, which pollutes the transduced signal with thermal states. In this Letter, we eliminate thermomechanical noise in the GHz-frequency mechanical breathing mode of a piezoelectric optomechanical crystal using cryogenic cooling in a dilution refrigerator. We optically measure an average thermal occupancy of the mechanical mode of only 0.7±0.4 phonons, providing a path towards low-noise microwave-to-optical conversion in the quantum regime.
Mechanical modes are a potentially useful resource for quantum information applications, such as quantum-level wavelength transducers, due to their ability to interact with electromagnetic radiation across the spectrum. A significant challenge for wavelength transducers is thermomechanical noise in the mechanical mode, which pollutes the transduced signal with thermal states. In this Letter, we eliminate thermomechanical noise in the GHz-frequency mechanical breathing mode of a piezoelectric optomechanical crystal using cryogenic cooling in a dilution refrigerator. We optically measure an average thermal occupancy of the mechanical mode of only 0.7±0.4 phonons, providing a path towards low-noise microwave-to-optical conversion in the quantum regime.
Optomechanical crystals (OMCs) enable coherent interactions between optical photons and microwave acoustic phonons, and represent a platform for implementing quantum transduction between microwave and optical signals. Optical-absorption-induced thermal noise at cryogenic (millikelvin) temperatures is one of the primary limitations of performance for OMC-based quantum transducers. Here, we address this challenge with a two-dimensional silicon OMC resonator that is side-coupled to a mechanically detached optical waveguide, realizing a six-fold reduction in the heating rate of the acoustic resonator compared to prior state-of-the-art, while operating in a regime of high optomechanical-backaction and millikelvin base temperature. This reduced heating translates into a demonstrated phonon-to-photon conversion efficiency of 93.1±0.8% at an added noise of 0.25±0.01 quanta, representing a significant advance toward quantum-limited microwave-optical frequency conversion and optically controlled quantum acoustic memories.
Microwave-to-optical transduction has received a great deal of interest from the cavity optomechanics community as a landmark application for electro-optomechanical systems. In this Letter, we demonstrate a novel transducer that combines high-frequency mechanical motion and a microwave cavity for the first time. The system consists of a 3D microwave cavity and a gallium arsenide optomechanical crystal, which has been placed in the microwave electric field maximum. This allows the microwave cavity to actuate the gigahertz-frequency mechanical breathing mode in the optomechanical crystal through the piezoelectric effect, which is then read out using a telecom optical mode. The gallium arsenide optomechanical crystal is a good candidate for low-noise microwave-to-telecom transduction, as it has been previously cooled to the mechanical ground state in a dilution refrigerator. Moreover, the 3D microwave cavity architecture can naturally be extended to couple to superconducting qubits and to create hybrid quantum systems.
Coherent interfaces between optical photons and mechanical excitations provide a promising route towards phonon-state engineering and hybrid quantum information processing. Cavity optomechanical systems enable such interfaces via optomechanically induced transparency (OMIT), allowing coherent mapping between traveling optical fields and localized mechanical modes. However, previous implementations of OMIT conversion protocols were limited to classical input signals with large coherent state photon numbers due to room temperature operation and corresponding thermal mechanical noise. Here, we demonstrate efficient low-noise photon-phonon state transfer close to the single-quantum regime in an optomechanical crystal operated at Millikelvin temperatures. Using weak coherent optical input pulses at the few-photon level, we achieve a record-level photon-phonon conversion efficiency of η=0.76, a mechanical storage lifetime of T1=7.3μs, and a tunable conversion bandwidth exceeding 4.5 MHz. Hanbury Brown-Twiss measurements of the retrieved signal demonstrate the coherent nature of the converted phononic state, evidencing low added thermal noise in the conversion process (nth=9.0). These results establish optomechanical crystals as efficient optical interfaces to GHz mechanical modes and provide a pathway toward deterministic single-quantum-level mechanical state preparation.
Noise is an ever-present reality of the world we live in. From the non-deterministic movement of matter to the fluctuations of the physical fields surrounding us, noise is the ultimate adversary of all things pure. Noise limits the fidelity of information transfer, particularly for quantum signals relying on coherence. Yet at sufficiently low temperatures, ambient thermal noise is suppressed to a level where even quantum signals can maintain coherence, making them available for technological applications. Modern cryogenic technologies enable access to environmental temperatures of 10 mK, allowing quantum-coherent transfer and processing of signals with carrier frequencies in the GHz range.A technology that operates in this regime is the optomechanical crystal: a nanofabricated device that supports high-quality resonances for both optical and acoustic fields and enables coherent coupling between the two. Through the optomechanical interaction, the acoustic mode can serve as a universal bus for the optical field, coherently linking it to other nonlinear systems, such as superconducting qubits – thereby enabling quantum microwave-to-optical transduction. As with many quantum systems, however, device performance is constrained by excess noise. In optomechanical crystals, this noise primarily stems from optical absorption combined with insufficient thermal anchoring. Achieving robust quantum-level operation in future devices therefore requires a detailed understanding and careful mitigation of these noise mechanisms.This thesis makes progress toward overcoming optical-absorption-induced noise in optomechanical crystals by (I) introducing a new class of optomechanical devices with superior thermal anchoring: the release-free optomechanical crystal; and (II) carefully investigating its noise performance and potential for microwave-to-optical transduction. The results presented in this thesis contribute to the understanding of noise limits in silicon optomechanical crystals and showcase the release-free platform as a viable alternative for on-chip, low-noise optomechanics.
Abstract Integrated optomechanical systems are a leading platform for manipulating, sensing, and distributing quantum information, but are limited by residual optical heating. Here, we demonstrate a two-dimensional optomechanical crystal (OMC) geometry with increased thermal anchoring and a mechanical mode at 7.4 GHz, well aligned with the operation range of cryogenic microwave hardware and piezoelectric transducers. The eight times better thermalization than current one-dimensional OMCs, large optomechanical coupling rates, g 0/2π ≈ 880 kHz, and high optical quality factors, Q opt = 2.4 × 105, allow ground-state cooling (n m = 0.32) of the acoustic mode from 3 K and entering the optomechanical strong-coupling regime. In pulsed sideband asymmetry measurements, we show ground-state operation (n m < 0.45) at temperatures below 10 mK, with repetition rates up to 3 MHz, generating photon-phonon pairs at ≈ 147 kHz. Our results extend optomechanical system capabilities and establish a robust foundation for future microwave-to-optical transducers with entanglement rates exceeding state-of-the-art superconducting qubit decoherence rates.
Optical quantum networks provide a natural route for connecting distant superconducting quantum processors, enabling distributed quantum computation, sensing, and communication. Piezo-optomechanical transducers are among the leading candidates for scalable microwave-to-optical quantum interfaces. However, prior one-dimensional piezo-optomechanical transducers remain limited by optical-absorption-induced heating and the resulting thermal noise. Two-dimensional optomechanical crystals offer substantially improved thermalization from better thermal anchoring, but their structural complexity has so far hindered the realization of a fully integrated two-dimensional transducer. Here, we overcome this challenge with a new design strategy based on band structure engineering. We fabricate the devices and experimentally characterize the response, measuring an electromechanical damping rate of 4.6 kHz at room temperature and electromechanical coupling rate of 0.17 MHz by wire-bonding to a multi-mode microwave resonator at 10 mK. Bidirectional transduction is performed with a calibrated internal efficiency of 0.85\% in the continuous-wave operation, alongside pulsed photon-phonon pair generation near its quantum ground state. Our results represent a significant step toward high-efficiency and low-noise transducers for entangling remote superconducting qubits.