Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1808.09881 · Physical review. B./Physical review. B

Controllable two-qubit swapping gate using superconducting circuits

S. E. Rasmussen, K. S. Christensen, Nikolaj Thomas Zinner

Published Apr 10, 2019• 13 citations
arXivHTMLPDF

Abstract

In this paper, we investigate a linear chain of qubits and determine that it can be configured into a conditional two-qubit swapping gate, where the first and last qubits of the chain are the swapped qubits, and the remaining middle ancilla qubits are controlling the state of the gate. The swapping gate introduces different phases on the final states depending on the initial states. In particular, we focus on a chain of four qubits and show the swapping gate it implements. We simulate the chain with realistic parameters, and decoherence noise and leakage to higher excited states, and find an average fidelity of around 0.99. We propose a superconducting circuit which implements this chain of qubits and present a circuit design of the circuit. We also discuss how to operate the superconducting circuit such that the state of the gate can be controlled. Lastly, we discuss how the circuit can be straightforwardly altered and may be used to simulate Hamiltonians with nontrivial topological properties.

DOI
10.1103/physrevb.99.134508

Related papers

High-fidelity conditional two-qubit swapping gate using tunable ancillas

Niels Jakob Søe Loft, Morten Kjærgaard, Lasse Bjørn Kristensen +5 more

Scalable quantum computing relies crucially on high-fidelity entangling operations. Here we demonstrate that four coupled qubits can operate as a high-fidelity two-qubit entangling gate that swaps two target qubits and adds a relative sign on the $\lvert 11 \rangle$ state (ZSWAP). The gate operation is controlled by the state of two ancilla (control) qubits. The system is readily implementable with superconducting qubits, using capacitively coupled qubits arranged in a diamond-shaped architecture. By using realistic device and noise parameters from state-of-the-art superconducting qubits, we show that the conditional ZSWAP operation can be implemented with a fidelity above 0.99 in a time $t_g \sim 65$ ns.

APS•Sep 24, 2018•1 citation

Quantum interference device for controlled two-qubit operations

Niels Jakob Søe Loft, Morten Kjærgaard, Lasse Bjørn Kristensen +5 more

Abstract Universal quantum computing relies on high-fidelity entangling operations. Here, we demonstrate that four coupled qubits can operate as a quantum gate, where two qubits control the operation on two target qubits (a four-qubit gate). This configuration can implement four different controlled two-qubit gates: two different entangling swap and phase operations, a phase operation distinguishing states of different parity, and the identity operation (idle quantum gate), where the choice of gate is set by the state of the control qubits. The device exploits quantum interference to control the operation on the target qubits by coupling them to each other via the control qubits. By connecting several four-qubit devices in a two-dimensional lattice, one can achieve a highly connected quantum computer. We consider an implementation of the four-qubit gate with superconducting qubits, using capacitively coupled qubits arranged in a diamond-shaped architecture.

arXiv:1809.09049•npj Quantum Information•May 29, 2020•15 citations

Quantum interference device for controlled two-qubit operations

Niels Jakob Søe Loft, Morten Kjærgaard, Lasse Bjørn Kristensen +5 more

Universal quantum computing relies on high-fidelity entangling operations. Here, we demonstrate that four coupled qubits can operate as a quantum gate, where two qubits control the operation on two target qubits (a four-qubit gate). This configuration can implement four different controlled two-qubit gates: two different entangling swap and phase operations, a phase operation distinguishing states of different parity, and the identity operation (idle quantum gate), where the choice of gate is set by the state of the control qubits. The device exploits quantum interference to control the operation on the target qubits by coupling them to each other via the control qubits. By connecting several four-qubit devices in a two-dimensional lattice, one can achieve a highly connected quantum computer. We consider an implementation of the four-qubit gate with superconducting qubits, using capacitively coupled qubits arranged in a diamond-shaped architecture.

•Jan 1, 2020•16 citations

Scheme for parity-controlled multi-qubit gates with superconducting qubits

Kasper Sangild Christensen, Nikolaj Thomas Zinner, Morten Kjærgaard

Multi-qubit parity measurements are at the core of many quantum error correction schemes. Extracting multi-qubit parity information typically involves using a sequence of multiple two-qubit gates. In this paper, we propose a superconducting circuit device with native support for multi-qubit parity-controlled gates (PCG). These are gates that perform rotations on a parity ancilla based on the multi-qubit parity operator of adjacent qubits, and can be directly used to perform multi-qubit parity measurements. The circuit consists of a set of concatenated Josephson ring modulators and effectively realizes a set of transmon-like qubits with strong longitudinal nearest-neighbor couplings. PCGs are implemented by applying microwave drives to the parity ancilla at specific frequencies. We investigate the scheme's performance with numerical simulation using realistic parameter choices and decoherence rates, and find that the device can perform four-qubit PCGs in 30 ns with process fidelity surpassing 99%. Furthermore, we study the effects of parameter disorder and spurious coupling between next-nearest neighboring qubits. Our results indicate that this approach to realizing PCGs constitute an interesting candidate for near-term quantum error correction experiments.

arXiv:2302.00719•Feb 1, 2023•1 citation

Efficient nnn-qubit entangling operations via a superconducting quantum router

Xuntao Wu, Haoxiong Yan, Gustav Andersson +13 more

Quantum algorithms on near-term quantum processors are typically executed using shallow quantum circuits composed of one- and two-qubit gates. However, as circuit depth and gate number increase, gate imperfections and qubit decoherence begin to dominate, limiting algorithmic complexity. An alternative approach is to explore gates involving more than two qubits. In previous work (X. Wu et al., Physical Review X 14, 041030 (2024)), we demonstrated a new superconducting qubit architecture with user-selectable two-qubit interactions via a reconfigurable router, used to connect pairs of qubits. Here, we leverage this novel architecture to realize programmable and efficient multi-qubit operations involving more than two qubits, resulting in faster preparation of multi-qubit entangled states with good fidelities. We also successfully apply model-free reinforcement learning to perform multi-qubit gates, including training a two-qubit controlled-Z gate as well as three-qubit controlled-SWAP and controlled-controlled-phase (Fredkin and Toffoli) gates. Higher $n$th-order gates may also be feasible, using our high-connectivity router design. This could provide a more efficient and higher-fidelity implementation of complex quantum algorithms and a more practical approach to quantum computation.

quant-pharXiv:2604.15432•Apr 20, 2026•0 citations

Tunable Coupler for Realizing a Controlled-Phase Gate with Dynamically Decoupled Regime in a Superconducting Circuit

X. Li, T. Cai, H. Yan +13 more

Controllable interaction between superconducting qubits is desirable for large-scale quantum computation and simulation. Here, based on a theoretical proposal by Yan et al. [Phys. Rev. Appl. 10, 054061 (2018)] we experimentally demonstrate a simply designed and flux-controlled tunable coupler with a continuous tunability by adjusting the coupler frequency, which can completely turn off adjacent superconducting qubit coupling. Utilizing the tunable interaction between two qubits via the coupler, we implement a different type of controlled-phase (cz) gate with ``dynamically decoupled regime,'' which allows the qubit-qubit coupling to be only ``on'' at the usual operating point while dynamically ``off'' during the tuning process of one qubit frequency into and out of the operating point. This scheme not only efficiently suppresses the leakage out of the computational subspace, but also allows for the acquired two-qubit phase being geometric at the operating point. We achieve an average cz gate fidelity of $98.3\ifmmode\pm\else\textpm\fi{}0.6\mathrm{%}$, which is dominantly limited by qubit decoherence. The demonstrated tunable coupler provides a desirable tool to suppress adjacent qubit coupling and is suitable for large-scale quantum computation and simulation.

arXiv:1912.10721•Physical Review Applied•Aug 25, 2020•117 citations
In this paper, we investigate a linear chain of qubits and determine that it can be configured into a conditional two-qubit swapping gate, where the first and last qubits of the chain are the swapped qubits, and the remaining middle ancilla qubits are controlling the state of the gate. The swapping gate introduces different phases on the final states depending on the initial states. In particular, we focus on a chain of four qubits and show the swapping gate it implements. We simulate the chain with realistic parameters, and decoherence noise and leakage to higher excited states, and find an average fidelity of around 0.99. We propose a superconducting circuit which implements this chain of qubits and present a circuit design of the circuit. We also discuss how to operate the superconducting circuit such that the state of the gate can be controlled. Lastly, we discuss how the circuit can be straightforwardly altered and may be used to simulate Hamiltonians with nontrivial topological properties.
Scalable quantum computing relies crucially on high-fidelity entangling operations. Here we demonstrate that four coupled qubits can operate as a high-fidelity two-qubit entangling gate that swaps two target qubits and adds a relative sign on the ∣11⟩\lvert 11 \rangle∣11⟩ state (ZSWAP). The gate operation is controlled by the state of two ancilla (control) qubits. The system is readily implementable with superconducting qubits, using capacitively coupled qubits arranged in a diamond-shaped architecture. By using realistic device and noise parameters from state-of-the-art superconducting qubits, we show that the conditional ZSWAP operation can be implemented with a fidelity above 0.99 in a time tg∼65t_g \sim 65tg​∼65 ns.
Abstract Universal quantum computing relies on high-fidelity entangling operations. Here, we demonstrate that four coupled qubits can operate as a quantum gate, where two qubits control the operation on two target qubits (a four-qubit gate). This configuration can implement four different controlled two-qubit gates: two different entangling swap and phase operations, a phase operation distinguishing states of different parity, and the identity operation (idle quantum gate), where the choice of gate is set by the state of the control qubits. The device exploits quantum interference to control the operation on the target qubits by coupling them to each other via the control qubits. By connecting several four-qubit devices in a two-dimensional lattice, one can achieve a highly connected quantum computer. We consider an implementation of the four-qubit gate with superconducting qubits, using capacitively coupled qubits arranged in a diamond-shaped architecture.
Universal quantum computing relies on high-fidelity entangling operations. Here, we demonstrate that four coupled qubits can operate as a quantum gate, where two qubits control the operation on two target qubits (a four-qubit gate). This configuration can implement four different controlled two-qubit gates: two different entangling swap and phase operations, a phase operation distinguishing states of different parity, and the identity operation (idle quantum gate), where the choice of gate is set by the state of the control qubits. The device exploits quantum interference to control the operation on the target qubits by coupling them to each other via the control qubits. By connecting several four-qubit devices in a two-dimensional lattice, one can achieve a highly connected quantum computer. We consider an implementation of the four-qubit gate with superconducting qubits, using capacitively coupled qubits arranged in a diamond-shaped architecture.
Multi-qubit parity measurements are at the core of many quantum error correction schemes. Extracting multi-qubit parity information typically involves using a sequence of multiple two-qubit gates. In this paper, we propose a superconducting circuit device with native support for multi-qubit parity-controlled gates (PCG). These are gates that perform rotations on a parity ancilla based on the multi-qubit parity operator of adjacent qubits, and can be directly used to perform multi-qubit parity measurements. The circuit consists of a set of concatenated Josephson ring modulators and effectively realizes a set of transmon-like qubits with strong longitudinal nearest-neighbor couplings. PCGs are implemented by applying microwave drives to the parity ancilla at specific frequencies. We investigate the scheme's performance with numerical simulation using realistic parameter choices and decoherence rates, and find that the device can perform four-qubit PCGs in 30 ns with process fidelity surpassing 99%. Furthermore, we study the effects of parameter disorder and spurious coupling between next-nearest neighboring qubits. Our results indicate that this approach to realizing PCGs constitute an interesting candidate for near-term quantum error correction experiments.
Quantum algorithms on near-term quantum processors are typically executed using shallow quantum circuits composed of one- and two-qubit gates. However, as circuit depth and gate number increase, gate imperfections and qubit decoherence begin to dominate, limiting algorithmic complexity. An alternative approach is to explore gates involving more than two qubits. In previous work (X. Wu et al., Physical Review X 14, 041030 (2024)), we demonstrated a new superconducting qubit architecture with user-selectable two-qubit interactions via a reconfigurable router, used to connect pairs of qubits. Here, we leverage this novel architecture to realize programmable and efficient multi-qubit operations involving more than two qubits, resulting in faster preparation of multi-qubit entangled states with good fidelities. We also successfully apply model-free reinforcement learning to perform multi-qubit gates, including training a two-qubit controlled-Z gate as well as three-qubit controlled-SWAP and controlled-controlled-phase (Fredkin and Toffoli) gates. Higher nnnth-order gates may also be feasible, using our high-connectivity router design. This could provide a more efficient and higher-fidelity implementation of complex quantum algorithms and a more practical approach to quantum computation.
Controllable interaction between superconducting qubits is desirable for large-scale quantum computation and simulation. Here, based on a theoretical proposal by Yan et al. [Phys. Rev. Appl. 10, 054061 (2018)] we experimentally demonstrate a simply designed and flux-controlled tunable coupler with a continuous tunability by adjusting the coupler frequency, which can completely turn off adjacent superconducting qubit coupling. Utilizing the tunable interaction between two qubits via the coupler, we implement a different type of controlled-phase (cz) gate with ``dynamically decoupled regime,'' which allows the qubit-qubit coupling to be only ``on'' at the usual operating point while dynamically ``off'' during the tuning process of one qubit frequency into and out of the operating point. This scheme not only efficiently suppresses the leakage out of the computational subspace, but also allows for the acquired two-qubit phase being geometric at the operating point. We achieve an average cz gate fidelity of $98.3\ifmmode\pm\else\textpm\fi{}0.6\mathrm{%}$, which is dominantly limited by qubit decoherence. The demonstrated tunable coupler provides a desirable tool to suppress adjacent qubit coupling and is suitable for large-scale quantum computation and simulation.