It has been suggested that both quantum superpositions and nonlinear interactions are important resources for quantum metrology. However, to date the different roles that these two resources play in the precision enhancement are not well understood. Here, we experimentally demonstrate a Heisenberg-scaling metrology to measure the parameter governing the nonlinear coupling between two different optical modes. The intense mode with n (more than 10^{6} in our work) photons manifests its effect through the nonlinear interaction strength which is proportional to its average photon number. The superposition state of the weak mode, which contains only a single photon, is responsible for both the linear Hamiltonian and the scaling of the measurement precision. By properly preparing the initial state of single photon and making projective photon-counting measurements, the extracted classical Fisher information (FI) can saturate the quantum FI embedded in the combined state after coupling, which is ∼n^{2} and leads to a practical precision ≃1.2/n. Free from the utilization of entanglement, our work paves a way to realize Heisenberg-scaling precision when only a linear Hamiltonian is involved.
It has been suggested that both quantum superpositions and nonlinear interactions are important resources for quantum metrology. However, to date the different roles that these two resources play in the precision enhancement are not well understood. Here, we experimentally demonstrate a Heisenberg-scaling metrology to measure the parameter governing the nonlinear coupling between two different optical modes. The intense mode with n (more than 10^{6} in our work) photons manifests its effect through the nonlinear interaction strength which is proportional to its average photon number. The superposition state of the weak mode, which contains only a single photon, is responsible for both the linear Hamiltonian and the scaling of the measurement precision. By properly preparing the initial state of single photon and making projective photon-counting measurements, the extracted classical Fisher information (FI) can saturate the quantum FI embedded in the combined state after coupling, which is ∼n^{2} and leads to a practical precision ≃1.2/n. Free from the utilization of entanglement, our work paves a way to realize Heisenberg-scaling precision when only a linear Hamiltonian is involved.
Abstract Improving the precision of measurements is a significant scientific challenge. Previous works suggest that in a photon-coupling scenario the quantum fisher information shows a quantum-enhanced scaling of N 2 , which in theory allows a better-than-classical scaling in practical measurements. In this work, utilizing mixed states with a large uncertainty and a post-selection of an additional pure system, we present a scheme to extract this amount of quantum fisher information and experimentally attain a practical Heisenberg scaling. We performed a measurement of a single-photon’s Kerr non-linearity with a Heisenberg scaling, where an ultra-small Kerr phase of ≃6 × 10 −8 rad was observed with a precision of ≃3.6 × 10 −10 rad. From the use of mixed states, the upper bound of quantum fisher information is improved to 2 N 2 . Moreover, by using an imaginary weak-value the scheme is robust to noise originating from the self-phase modulation.
The Heisenberg scaling is an ultimate precision limit of parameter estimation allowed by the principles of quantum mechanics, with no counterpart in the classical realm, and has been a long-pursued goal in quantum metrology. It has been known that interactions between the probes can help reach the Heisenberg scaling without entanglement. In this paper, we show that interactions between the probes and the additional dimensions of an ancillary system may also increase the precision of parameter estimation to surpass the standard quantum limit and attain the Heisenberg scaling without entanglement, if the measurement scheme is properly designed. The quantum Fisher information exhibits periodic patterns over the evolution time, implying the existence of optimal time points for measurements that can maximize the quantum Fisher information. By implementing optimizations over the Hamiltonian, the initial states of the probes and the ancillary system, the interaction strength, and the time points for measurements, our protocol achieves the Heisenberg scaling for the parameter of the probe Hamiltonian, in terms of both evolution time and probe number. Our protocol features two aspects: (i) the Heisenberg scaling can be achieved by a product state of the probes and (ii) mere local measurement on the ancilla is sufficient, both of which reduce the quantum resources and the implementation complexity to achieve the Heisenberg scaling. The paper is concluded by the investigation of the effects of noise on this protocol.
Free-electron quantum optics has recently emerged as a promising platform for coherent electron-light interactions, yet its potential for quantum-enhanced metrology remains largely unexplored. Here, we investigate the fundamental precision limit of coupling-strength estimation in multi-electron photon-induced near-field electron microscopy (PINEM), demonstrating that the quantum Fisher information scales quadratically with electron number. We then propose an experimentally accessible scheme combining squeezed-light probing and optical homodyne detection that attains Heisenberg scaling with respect to electron number, provided the electrons exhibit nonzero inter-electron coherence, while surpassing conventional PINEM sensing in photon-number enhancement as well. We further analyze the effect of imperfect electron preparation, showing that electron phase noise is converted into a fluctuating optical displacement and eventually limits the precision. To overcome this limitation, an auxiliary optical mode coupled to the same electron ensemble measures the displacement noise in the signal mode, allowing its conditional suppression and recovery of the Heisenberg scaling. Our work establishes multi-electron coherence as a resource for free-electron quantum metrology and opens the route to precision measurements of nanoscale electron-light interactions.
Abstract Improving the precision of measurements is a significant scientific challenge. Previous works suggest that in a photon-coupling scenario the quantum fisher information shows a quantum-enhanced scaling of N2, which in theory allows a better-than-classical scaling in practical measurements. In this work, utilizing mixed states with a large uncertainty and a post-selection of an additional pure system, we present a scheme to extract this amount of quantum fisher information and experimentally attain a practical Heisenberg scaling. We performed a measurement of a single-photon’s Kerr non-linearity with a Heisenberg scaling, where an ultra-small Kerr phase of ≃6 × 10−8 rad was observed with a precision of ≃3.6 × 10−10 rad. From the use of mixed states, the upper bound of quantum fisher information is improved to 2N2. Moreover, by using an imaginary weak-value the scheme is robust to noise originating from the self-phase modulation.
Quantum metrology promises measurement precision beyond the classical limit by using suitably tailored quantum states and detection strategies. However, scaling up this advantage is experimentally challenging, due to the difficulty of generating high-quality large-scale probes. Here, we build a photonic setup that achieves enhanced precision scaling by manipulating the probe's dynamics through operations performed in a coherently controlled order. Our setup applies an unknown rotation and a known orbital angular momentum increase in a coherently controlled order, in a way that reproduces a hybrid quantum SWITCH involving gates generated by both discrete and continuous variables. The unknown rotation angle θ is measured with precision scaling as 1/4ml when a photon undergoes a rotation of 2mθ and an angular momentum shift of 2lℏ. With a practical enhancement factor as high as 2317, the ultimate precision in our experiment is 0.0105′′ when using 7.16×107 photons, corresponding to a normalized precision of ≈10−4rad per photon. No photon interaction occurs in our experiment, and the precision enhancement consumes only a linearly increasing amount of physical resources while achieving a nonlinear scaling of the precision. We further indicate that this nonlinear enhancement roots in an in-depth exploration of the Heisenberg uncertainty principle (HUP), and our findings not only deepen the understanding of the HUP but also pave a pathway for advancements in quantum metrology.
Quantum metrology offers the potential to surpass its classical counterpart, pushing the boundaries of measurement precision toward the ultimate Heisenberg limit. This enhanced precision is normally attained by utilizing large squeezed states or multiparticle entangled quantum states, both of which are often challenging to implement and prone to decoherence in real quantum devices. In this work, we present a versatile and on-demand protocol for deterministic parameter estimation that leverages two efficient state-transfer operations on a single bosonic mode. Specifically, we demonstrate this protocol in the context of phase estimation using the superposition of coherent states in the bosonic circuit quantum electrodynamics (cQED) platform. With low average photon numbers of only up to 1.76, we achieve quantum enhanced precision approaching the Heisenberg scaling, reaching a metrological gain of 7.5 ( 6 ) dB. Importantly, we show that the gain or sensitivity range can be further enhanced on the fly by tailoring the input states, with different superposition weights, based on specific system constraints. The realization of this versatile and efficient scheme affords a promising path toward practical quantum enhanced sensing, not only for bosonic cQED hardware but also readily extensible to other continuous-variable platforms.