Quantum key distribution is rising as an important cryptographic primitive for protecting the communication infrastructure in the digital era. However, its implementation security is often weakened by components whose behavior deviates from what is expected. Here we analyze the response of a self-differencing avalanche photodiode, a key enabler for high speed quantum key distribution, to intense light shone from a continuous-wave laser. Under incorrect settings, the cancellation entailed by the self-differencing circuitry can make the detector insensitive to single photons. However, we experimentally demonstrate that even in such cases intensity modulation can be used as an effective measure to restore the detector's expected response to the input light.
Quantum key distribution is rising as an important cryptographic primitive for protecting the communication infrastructure in the digital era. However, its implementation security is often weakened by components whose behavior deviates from what is expected. Here we analyze the response of a self-differencing avalanche photodiode, a key enabler for high speed quantum key distribution, to intense light shone from a continuous-wave laser. Under incorrect settings, the cancellation entailed by the self-differencing circuitry can make the detector insensitive to single photons. However, we experimentally demonstrate that even in such cases intensity modulation can be used as an effective measure to restore the detector's expected response to the input light.
In recent years, the security of avalanche photodiodes as single photon detectors for quantum key distribution has been subjected to much scrutiny. The most prominent example of this surrounds the vulnerability of such devices to blinding under strong illumination. We focus on self-differencing avalanche photodiodes, single photon detectors that have demonstrated count rates exceeding 1 GCounts/s resulting in secure key rates over 1 MBit/s. These detectors use a passive electronic circuit to cancel any periodic signals thereby enhancing detection sensitivity. However this intrinsic feature can be exploited by adversaries to gain control of the devices using illumination of a moderate intensity. Through careful experimental examinations, we define here a set of criteria for these detectors to avoid such attacks.
Implementation of high-speed quantum key distribution (QKD) has become one of the major focuses in the field, which produces a high key-generation rate for applications. To achieve high-speed QKD, tailored techniques are developed and employed to quickly generate and detect quantum states. However, these techniques may introduce unique loopholes to compromise the security of QKD systems. In this paper, we investigate the loopholes of the self-differencing (SD) avalanche photodiode (APD) detector, typically used for high-speed detection in a QKD system, and demonstrate experimental testing of the SD APD detector under strong-pulse-illumination attack. This attack presents blinding stability and helps an eavesdropper to learn the secret key without introducing extra quantum bit rate error. Based on this testing, we propose a set of criteria for protecting SD APD detectors from the strong-pulse-illumination attack.
Quantum key distribution (QKD) allows two users to communicate with information theoretic security by encoding information on single photons. This security is based on the laws of physics and as such can never be broken in theory. However, in practice, components do not always behave according to their theoretical models and these deviations can be exploited by an eavesdropper. In recent years, exposing loopholes in QKD systems, known as quantum hacking, has attracted significant attention. The components most susceptible to being hacked are the single-photon detectors, often avalanche photodiodes (APDs), as they are directly exposed to the optical channel. Whilst measurement-device-independent QKD removes detector vulnerability from the system, secure key rates with this technique can be much lower than point-to-point links. As such, mitigating attacks on QKD systems is a pressing challenge in QKD. In this thesis, the focus is on a special class of detectors, self-differencing APDs (SD-APDs), which have facilitated state-of-the art demonstrations of QKD. The susceptibility of SD-APDs to blinding attacks, the most explored and successful attack to date, was investigated and it was shown that by following best practice for their operation, such an attack would be unsuccessful. We have also proposed and developed a countermeasure such that the onus for appropriate operation could be removed from the user. We have also explored an arguably more dangerous attack, in the form of the after-gate attack. We have shown that delayed detection events, ordinarily considered detrimental in QKD, can provide inherent protection against this attack. Finally, backflashes in GHz-gated APDs were investigated for the first time and it was shown that threat they pose to QKD security is negligible. These results highlight the inherent protection to a number of attacks that self-differencing APDs possess. We stress that the findings presented in this thesis are also applicable to other types of fast-gated InGaAs APDs that don't possess self-differencing circuitry.
Abstract Quantum key distribution (QKD), rooted in quantum mechanics, offers information-theoretic security. However, practical systems open security threats due to imperfections, notably bright-light blinding attacks targeting single-photon detectors. Here, we propose a concise, robust defense strategy for protecting single-photon detectors in QKD systems against blinding attacks. Our strategy uses a dual approach: detecting the bias current of the avalanche photodiode (APD) to defend against continuous-wave blinding attacks, and monitoring the avalanche amplitude to protect against pulsed blinding attacks. By integrating these two branches, the proposed solution effectively identifies and mitigates a wide range of bright light injection attempts, significantly enhancing the resilience of QKD systems against various bright-light blinding attacks. This method fortifies the safeguards of quantum communications and offers a crucial contribution to the field of quantum information security.
Quantum communication, in particular, quantum key distribution (QKD) is moving ever closer to real world implementation. However, for successful QKD system deployment, the QKD system components must be robustly designed and feature highly reliable operation. In this paper we focus on one important aspect of any quantum communication system: the single photon detector. In particular our interest is centered upon the InGaAs avalanche photodiode (APD) single photon detector operating in a self-differencing (SD) mode. Such a detector features high clock frequencies of up to 3GHz, high photon count rates as well as detection efficiencies approaching 20% with low afterpulsing. We show successful operation of a high bit rate QKD system using this SD-APD technology in a real world fiber network.
In this paper, we present the research of the blinding attack on single photon avalanche diodes (SPAD) based on InGaAs structure which is used in quantum key distribution systems with modulated laser radiation. One of the variants of this attack is using continuous wave (CW) light but there is protection from it like monitoring of SPAD’s current. Thus, we use modulated CW radiations. Modulation allows us to establish parameters of blinding pulses. We studied the dependencies of the detector’s bias current on blinding pulse energy using different widths of light pulses in the range from 4ns to 20 ns than we applied various repetition rates which are 10 MHz, 5 MHz, 2.5 MHz, and 1MHz. Even we investigate this dependence using the not rectangular shape of pulses on repetition rates mentioned above.