Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1807.07017 · Physical Review Applied

Practical Guide to Quantum Phase Transitions in Quantum-Dot-Based Tunable Josephson Junctions

A. Kadlecová, Martin Žonda, Vladislav Pokorný, Tomáš Novotný

Published Apr 30, 2019• 30 citations
arXivHTMLPDF

Abstract

Superconducting quantum dots (SQDs), as generalized and tunable Josephson junctions, have potential for versatile components in electronic circuits and detectors. A key factor holding back their application is characterization, which often requires lengthy, impractical numerical methods. The authors offer simple analytical formulas that allow fast, reliable characterization of SQDs in different regimes, plus a straightforward and general method to locate the quantum phase transition from finite-temperature experimental data. These tools will dramatically speed up the characterization of real devices, and provide a handy framework to predict and refine the properties of these devices.

DOI
10.1103/physrevapplied.11.044094

Related papers

Hybrid quantum dot–superconducting systems: Josephson current and Kondo effect in the narrow-band limit

R. Allub, César R. Proetto

The case of a quantum dot connected to two superconducting leads is studied by using the narrow-band limit to describe the superconducting degrees of freedom. The model provides a simple theoretical framework, almost analytical, to analyze the interplay between the Kondo effect, superconductivity, and finite temperature. In the quantum dot Kondo regime, the model is completely characterized by the ratio $\ensuremath{\Delta}/J$, with $\ensuremath{\Delta}$ the superconducting gap and $J$ an effective antiferromagnetic exchange coupling between the dot and the leads. The model allows us to calculate, at any temperature $T$, the equilibrium Josephson current through the dot in a very straightforward way as a function of $\ensuremath{\Delta}/J$. The behavior of the current allows us to distinguish the four types of hybrid junctions: 0, ${0}^{\ensuremath{'}},{\ensuremath{\pi}}^{\ensuremath{'}}$, and $\ensuremath{\pi}$. The presence of the 0- and ${0}^{\ensuremath{'}}$-junction configurations are intrinsically linked to the Kondo effect in the quantum dot, while the $\ensuremath{\pi}$- and ${\ensuremath{\pi}}^{\ensuremath{'}}$-junction configurations are driven by the superconductivity in the leads. The Josephson critical current has a non-monotonic behavior with temperature, that may be used for the experimental characterization of the fundamental $0\ensuremath{-}\ensuremath{\pi}$ transition. The model allows us to obtain easily a phase diagram $\ensuremath{\Delta}/J$ vs temperature, from where we can obtain an overall picture on the stability of the different types of junctions. From the explicit analytical expressions for the ground-state, low-energy excitations, free energy, and Josephson current, it is easy to understand the physical nature of the main features of the critical current and the phase diagram. The results, obtained with a minimum of numerical effort, are in a good qualitative agreement with more demanding calculational approaches aimed to solve the full model.

Physical Review B•Jan 30, 2015•9 citations

Quantum dynamics of semiconductor quantum dot Josephson junctions

Utkan Güngördü, Rusko Ruskov, Silas Hoffman +3 more

Josephson junctions constructed from superconductor-semiconductor-superconductor heterostructures have been used to realize a variety of voltage-tunable superconducting quantum devices, including qubits and parametric amplifiers. To date, theoretical descriptions of these systems have been restricted to small quantum fluctuations of the junction phase, making them inapplicable to many experiments. In this paper, we relax this, employing a path-integral formulation where the phase quantum dynamics is obtained self-consistently from an underlying many-body formalism. Our method recovers previously known results for small phase fluctuations, and predicts effects outside of that limit: (i) system capacitances undergo a gate-voltage-dependent renormalization; and (ii) an additional charge offset appears for asymmetric junctions. Our main results can be summarized in terms of a single-particle Hamiltonian, which can be directly compared to that of an ordinary Josephson junction. This more general theory could be a first step towards designing new quantum devices that go qualitatively beyond voltage-tunable variants of previously known circuits.

arXiv:2402.10330•Physical review. B./Physical review. B•Jun 2, 2025•2 citations

Experimental evaluation of the current-phase relation of a Josephson junction

Olaf Mielke, Thomas Ortlepp, Hermann F. Uhlmann +1 more

Josephson junctions act as active elements in superconducting electronics. The behavior of this nonlinear element is characterized by the relation between current and the quantum mechanical phase-difference. For an accurate device modeling detailed knowledge about this relation is necessary. To obtain detailed information, a method for direct measurement of the current-phase relation of different types of Josephson junctions was accomplished.

•Jun 22, 2009•0 citations

development and characterization of inas/al nanowire based josephson parametric amplifiers

Raphael Rousset-Zenou

This thesis project aims to construct optimal, tunable superconductor-semiconductor junctions for electronic quantum devices. Such junctions will be useful for solid state quantum computers where the tunability of the semiconducting element allows for new types of superconducting quantum bits (qubits). The archetypical device is the gate tunable Josephson junction that has recently been shown to work in different qubit architectures.Growth of semiconductor nanowires will be carried out in a III-V molecular beam epitaxy reactor and coat these with superconducting shells such as Al, Ta, and MoGe, several unexploited materials combinations will be tested. During the project I will also take part in device fabrication using these nanowires and low temperature measurement campaigns to probe superconductivity and quantum transport phenomena.

•Dec 8, 2025•0 citations

Mikroaaltopulssien reaaliaikainen havaitseminen heikosti suprajohtavalla bolometrilla

Kohvakka, Kassius

Sensitive and reliable photon detectors are ubiquitous tools in countless fields of engineering and the sciences. One of the most mature and widely applied approaches to photodetection is bolometry, where the absorption of radiation causes a measurable change in the temperature of the absorber material. Applications of bolometry include fields such as astrophysics, medicine, particle physics, and metrology, all of which greatly benefit from the development of more versatile and efficient detectors. In the field of superconducting quantum circuits, considerable progress has recently been made in developing ultrasensitive superconducting bolometers. Operating in the single-photon regime, these devices hold great potential for several applications within quantum technology, including qubit state measurement and characterization of microwave components and cryogenic environments. State-of-the-art bolometers based on graphene have been shown to reach sufficient energy resolution and operation speed to be applicable in the context of circuit quantum electrodynamics. In this thesis, a superconducting bolometer based on superconductor-normal-metal-superconductor Josephson junctions is studied. In particular, a detection protocol based on optimal filtering of the noisy detector output signal is implemented to detect microwave pulses during continuous operation of the device. The fidelity of the implemented real-time detection scheme is experimentally tested and compared to the theoretical energy resolution of the studied bolometer, computed from noise equivalent power. The device is found to reach 50% detection probability with minimal dark-count rate at pulse energies of approximately 2.2 zJ, exceeding the predicted resolution of 0.75 zJ by only a factor of three. In addition, the characteristic energy of the detector is determined to be approximately 1.5 zJ based on the total energy of pulses detected with fidelity F=0.5. The results give hope of future applications of the detection scheme to more sensitive bolometer samples.

•Jan 26, 2021•0 citations

Practical Guide to Quantum Phase Transitions in Superconducting Quantum Dots

A. Kadlecová, Martin Žonda, Vladislav Pokorný +1 more

•Jul 18, 2018•0 citations
Superconducting quantum dots (SQDs), as generalized and tunable Josephson junctions, have potential for versatile components in electronic circuits and detectors. A key factor holding back their application is characterization, which often requires lengthy, impractical numerical methods. The authors offer simple analytical formulas that allow fast, reliable characterization of SQDs in different regimes, plus a straightforward and general method to locate the quantum phase transition from finite-temperature experimental data. These tools will dramatically speed up the characterization of real devices, and provide a handy framework to predict and refine the properties of these devices.
The case of a quantum dot connected to two superconducting leads is studied by using the narrow-band limit to describe the superconducting degrees of freedom. The model provides a simple theoretical framework, almost analytical, to analyze the interplay between the Kondo effect, superconductivity, and finite temperature. In the quantum dot Kondo regime, the model is completely characterized by the ratio $\ensuremath{\Delta}/J$, with $\ensuremath{\Delta}$ the superconducting gap and JJJ an effective antiferromagnetic exchange coupling between the dot and the leads. The model allows us to calculate, at any temperature TTT, the equilibrium Josephson current through the dot in a very straightforward way as a function of $\ensuremath{\Delta}/J$. The behavior of the current allows us to distinguish the four types of hybrid junctions: 0, ${0}^{\ensuremath{'}},{\ensuremath{\pi}}^{\ensuremath{'}}$, and $\ensuremath{\pi}$. The presence of the 0- and ${0}^{\ensuremath{'}}$-junction configurations are intrinsically linked to the Kondo effect in the quantum dot, while the $\ensuremath{\pi}$- and ${\ensuremath{\pi}}^{\ensuremath{'}}$-junction configurations are driven by the superconductivity in the leads. The Josephson critical current has a non-monotonic behavior with temperature, that may be used for the experimental characterization of the fundamental $0\ensuremath{-}\ensuremath{\pi}$ transition. The model allows us to obtain easily a phase diagram $\ensuremath{\Delta}/J$ vs temperature, from where we can obtain an overall picture on the stability of the different types of junctions. From the explicit analytical expressions for the ground-state, low-energy excitations, free energy, and Josephson current, it is easy to understand the physical nature of the main features of the critical current and the phase diagram. The results, obtained with a minimum of numerical effort, are in a good qualitative agreement with more demanding calculational approaches aimed to solve the full model.
Josephson junctions constructed from superconductor-semiconductor-superconductor heterostructures have been used to realize a variety of voltage-tunable superconducting quantum devices, including qubits and parametric amplifiers. To date, theoretical descriptions of these systems have been restricted to small quantum fluctuations of the junction phase, making them inapplicable to many experiments. In this paper, we relax this, employing a path-integral formulation where the phase quantum dynamics is obtained self-consistently from an underlying many-body formalism. Our method recovers previously known results for small phase fluctuations, and predicts effects outside of that limit: (i) system capacitances undergo a gate-voltage-dependent renormalization; and (ii) an additional charge offset appears for asymmetric junctions. Our main results can be summarized in terms of a single-particle Hamiltonian, which can be directly compared to that of an ordinary Josephson junction. This more general theory could be a first step towards designing new quantum devices that go qualitatively beyond voltage-tunable variants of previously known circuits.
This thesis project aims to construct optimal, tunable superconductor-semiconductor junctions for electronic quantum devices. Such junctions will be useful for solid state quantum computers where the tunability of the semiconducting element allows for new types of superconducting quantum bits (qubits). The archetypical device is the gate tunable Josephson junction that has recently been shown to work in different qubit architectures.Growth of semiconductor nanowires will be carried out in a III-V molecular beam epitaxy reactor and coat these with superconducting shells such as Al, Ta, and MoGe, several unexploited materials combinations will be tested. During the project I will also take part in device fabrication using these nanowires and low temperature measurement campaigns to probe superconductivity and quantum transport phenomena.
Sensitive and reliable photon detectors are ubiquitous tools in countless fields of engineering and the sciences. One of the most mature and widely applied approaches to photodetection is bolometry, where the absorption of radiation causes a measurable change in the temperature of the absorber material. Applications of bolometry include fields such as astrophysics, medicine, particle physics, and metrology, all of which greatly benefit from the development of more versatile and efficient detectors. In the field of superconducting quantum circuits, considerable progress has recently been made in developing ultrasensitive superconducting bolometers. Operating in the single-photon regime, these devices hold great potential for several applications within quantum technology, including qubit state measurement and characterization of microwave components and cryogenic environments. State-of-the-art bolometers based on graphene have been shown to reach sufficient energy resolution and operation speed to be applicable in the context of circuit quantum electrodynamics. In this thesis, a superconducting bolometer based on superconductor-normal-metal-superconductor Josephson junctions is studied. In particular, a detection protocol based on optimal filtering of the noisy detector output signal is implemented to detect microwave pulses during continuous operation of the device. The fidelity of the implemented real-time detection scheme is experimentally tested and compared to the theoretical energy resolution of the studied bolometer, computed from noise equivalent power. The device is found to reach 50% detection probability with minimal dark-count rate at pulse energies of approximately 2.2 zJ, exceeding the predicted resolution of 0.75 zJ by only a factor of three. In addition, the characteristic energy of the detector is determined to be approximately 1.5 zJ based on the total energy of pulses detected with fidelity F=0.5. The results give hope of future applications of the detection scheme to more sensitive bolometer samples.