Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1807.00659 · Journal of the Optical Society of America B

Numerical investigation of mid-infrared single-photon generation

Richard A. McCracken, Francesco Graffitti, Alessandro Fedrizzi

Published Nov 8, 2018• 21 citations
arXivHTMLPDF

Abstract

Single-photon creation through parametric downconversion underpins quantum technology for quantum sensing and imaging. Here we numerically study the creation of single photons in the near- and mid-infrared regime from 1.5 - 12 um in a range of novel nonlinear semiconductor and chalcopyrite materials. We identify phase-matching conditions and single out regimes in which group-velocity matching can be achieved with commercially available pump lasers. Finally, we discuss how mid-infrared single photons can be detected. Using our numerical results, we identify materials and pump lasers for up-conversion detection in conventional wavelength bands. Our study provides a complete recipe for mid-IR single-photon generation and detection, opening up quantum enhancements for mid-IR applications such as bio-medical imaging, communication, and remote sensing.

DOI
10.1364/josab.35.000c38

Related papers

Wavelength variable generation and detection of photon pairs in visible and mid-infrared regions via spontaneous parametric downconversion

Masaya Arahata, Yu Mukai, Bo Cao +3 more

We report an experimental demonstration of wavelength variable generation and detection of photon pairs in the visible and mid-infrared (MIR) regions over a wide spectral range of 2–5 µm via spontaneous parametric downconversion. Despite the recent increase in interest in such a photon-pair source, there have been few detailed evaluations of emitted photons generated via the downconversion process in the low gain regime, due to the lack of suitable single-photon detectors. By changing the angle of the nonlinear crystal, we continuously tune the phase-matching condition and generate photon pairs as signal photons in the wavelength range of 600–965 nm and idler photons in the wavelength range of 1186–4694 nm. We evaluate the generated photon pairs using single and coincidence counts by superconducting nanowire single-photon detectors up to a wavelength of 2 µm and detect the intensity using an InSb detector with a lock-in detection system up to 5 µm. From this analysis, a pair generation rate of 10 5 s − 1 per mW of pump power is experimentally obtained for this wavelength range. This work provides a basis for the realization of applications such as heralded MIR single-photon sources, infrared imaging, and infrared spectroscopy based on quantum technologies in the MIR region.

Journal of the Optical Society of America B•May 5, 2021•20 citations

Reconfigurable mid-IR single photon sources based on functional materials

Dmytro O. Kundys, Francesco Graffitti, Richard A. McCracken +2 more

The future of quantum photonic technology depends on the realization of efficient sources of single photons, the ideal carriers of quantum information. Parametric downconversion (PDC) is a promising route to create highly coherent, spectrally pure single photons for quantum photonics using versatile group-velocity matching (GVM) and tailored nonlinearities. However, the functionality to actively control the poling period of nonlinear crystals used in PDC is currently missing, yet would enable to dynamically modify the wavelength of single photons produced in the PDC process. Here a detailed GVM study is presented for functional PMN-0.38PT material which can be dynamically repolled at ambient conditions with fields as low as 0.4 kV/cm. Our study reveals phase-matching conditions for pure single photon creation at ~ 5.4 microns. Further, a practical approach is proposed for on-flight wavelength switching of the created single photons. The reported reconfigurable functionality benefits a wide range of emerging quantum-enhanced applications in the mid-IR spectral region where the choice of single photon sources is currently limited.

•Dec 6, 2019•0 citations

Characterization of tunable mid-infrared spontaneous parametric down-conversion in AgGaS2

Filip Krajinić, M. M. Ćurčić, Marina M. Lekić +1 more

Abstract The nonlinear process of spontaneous parametric down-conversion in the silver-gallium-sulfide crystal can generate highly non-degenerate photon pairs in near-infrared and mid-infrared spectral ranges. In this work, we demonstrate and characterize the tunable mid-infrared photon source in silver-gallium-sulfide. By angle tuning the phase matching condition of the nonlinear crystal, we can tune the wavelength of the generated photons in mid-infrared from 5.661 to 10.885 μm (from 1766 to 919 cm −1 ), while the correlated photons in the near-infrared are from 747.1 to 702.6 nm. The phase matching curve and the frequency-angular spectrum of mid-infrared photons were experimentally validated by measuring the properties of near-infrared photons. The brightness of the photon pair source was found to be (29.2± 1.1) $$\frac{\text{MHz}}{\text{mW}}$$ in the low-gain regime, exceeding the values reported in previous studies using silver-gallium-sulfide crystals. The wide tunability of the photon source in the mid-infrared range is important for hyperspectral imaging and sensing, and it is of significant interest for biomedical, chemical, and environmental applications.

Applied Physics B•Mar 25, 2026•0 citations

Mid-infrared photon pair generation in AgGaS2

Mohit Kumar, Pawan Kumar, Andres Vega +3 more

We demonstrate nondegenerate photon pair generation by spontaneous parametric downconversion in a silver gallium sulfide AgGaS2 crystal. By tuning the pump wavelength, we achieve phase matching over a large spectral range. This allows to generate idler photons in the mid-infrared spectral range above a 6 μm wavelength with corresponding signal photons in the visible. Also, we show photon pair generation with broad spectral bandwidth. These results are a valuable step toward the development of quantum imaging and sensing techniques in the mid-infrared.

arXiv:2110.01511•Applied Physics Letters•Dec 13, 2021•17 citations

On-chip mid-infrared spectroscopy without mid-infrared photons

Boyi Xue, Renhong Gao, Yicheng Zhu +7 more

Mid-infrared (mid-IR) spectra revealing the distinct “fingerprint” of molecules are of critical importance for both science and technology in chemistry, physics, materials science, and biology. Mid-IR sensing and spectroscopy provide unique and powerful tools for crucial applications in greenhouse gas monitoring, hazardous emission detection, and medical breath diagnosis. However, the low-photon energy characteristic of the mid-IR spectrum poses significant challenges for both mid-IR light sources and detectors, hindering their compact and cost-efficient applications in various areas. Here, we experimentally demonstrate mid-IR gas spectroscopy without mid-IR photons solely using convenient near-IR optical components. This is realized by generating photon pairs (i.e., a mid-IR photon and a near-IR one) through a spontaneous parametric downconversion in a microscale optical cavity. The generation rate of near-IR photons strongly relies on the absorption of the mid-IR photon due to their quantum correlation. Through interacting with evanescent fields around the microcavity, the absorptive mid-IR resonances of the surrounding gas greatly affect the detected near-IR photons without harassing any mid-IR photon. This scheme presents a cost-effective and compact solution for on-chip quantum gas spectroscopy without requiring expensive mid-IR lasers and detectors or lasers, thereby paving new avenues for applications in environmental monitoring/safety, healthcare, and agriculture.

Applied Physics Reviews•Jan 5, 2026•2 citations

Recent Progress in Short and Mid-Infrared Single-Photon Generation: A Review

Arianna Elefante, Stefano Dello Russo, Fabrizio Sgobba +4 more

The generation of single photons in the mid-infrared spectral region is attracting the interest of scientific and technological research, motivated by the potential improvements that many important and emerging applications, such as quantum sensing, metrology and communication, could benefit from. This review reports the progress in short and mid-infrared single photon generation, focusing on probabilistic sources based on the two non-linear processes of spontaneous parametric downconversion (SPDC) and four wave mixing (FWM). On one hand, numerical simulations of mid-infrared SPDC are described as a powerful tool to assist and guide the experimental realization, along with the implementation and engineering of novel non-linear materials. On the other hand, the advantages offered by FWM in silicon waveguides in terms of integration, miniaturization and manufacturability are presented, providing an optimal technology for integrated quantum applications.

Optics•Jan 12, 2023•7 citations
Single-photon creation through parametric downconversion underpins quantum technology for quantum sensing and imaging. Here we numerically study the creation of single photons in the near- and mid-infrared regime from 1.5 - 12 um in a range of novel nonlinear semiconductor and chalcopyrite materials. We identify phase-matching conditions and single out regimes in which group-velocity matching can be achieved with commercially available pump lasers. Finally, we discuss how mid-infrared single photons can be detected. Using our numerical results, we identify materials and pump lasers for up-conversion detection in conventional wavelength bands. Our study provides a complete recipe for mid-IR single-photon generation and detection, opening up quantum enhancements for mid-IR applications such as bio-medical imaging, communication, and remote sensing.
We report an experimental demonstration of wavelength variable generation and detection of photon pairs in the visible and mid-infrared (MIR) regions over a wide spectral range of 2–5 µm via spontaneous parametric downconversion. Despite the recent increase in interest in such a photon-pair source, there have been few detailed evaluations of emitted photons generated via the downconversion process in the low gain regime, due to the lack of suitable single-photon detectors. By changing the angle of the nonlinear crystal, we continuously tune the phase-matching condition and generate photon pairs as signal photons in the wavelength range of 600–965 nm and idler photons in the wavelength range of 1186–4694 nm. We evaluate the generated photon pairs using single and coincidence counts by superconducting nanowire single-photon detectors up to a wavelength of 2 µm and detect the intensity using an InSb detector with a lock-in detection system up to 5 µm. From this analysis, a pair generation rate of 10 5 s − 1 per mW of pump power is experimentally obtained for this wavelength range. This work provides a basis for the realization of applications such as heralded MIR single-photon sources, infrared imaging, and infrared spectroscopy based on quantum technologies in the MIR region.
The future of quantum photonic technology depends on the realization of efficient sources of single photons, the ideal carriers of quantum information. Parametric downconversion (PDC) is a promising route to create highly coherent, spectrally pure single photons for quantum photonics using versatile group-velocity matching (GVM) and tailored nonlinearities. However, the functionality to actively control the poling period of nonlinear crystals used in PDC is currently missing, yet would enable to dynamically modify the wavelength of single photons produced in the PDC process. Here a detailed GVM study is presented for functional PMN-0.38PT material which can be dynamically repolled at ambient conditions with fields as low as 0.4 kV/cm. Our study reveals phase-matching conditions for pure single photon creation at ~ 5.4 microns. Further, a practical approach is proposed for on-flight wavelength switching of the created single photons. The reported reconfigurable functionality benefits a wide range of emerging quantum-enhanced applications in the mid-IR spectral region where the choice of single photon sources is currently limited.
Abstract The nonlinear process of spontaneous parametric down-conversion in the silver-gallium-sulfide crystal can generate highly non-degenerate photon pairs in near-infrared and mid-infrared spectral ranges. In this work, we demonstrate and characterize the tunable mid-infrared photon source in silver-gallium-sulfide. By angle tuning the phase matching condition of the nonlinear crystal, we can tune the wavelength of the generated photons in mid-infrared from 5.661 to 10.885 μm (from 1766 to 919 cm −1 ), while the correlated photons in the near-infrared are from 747.1 to 702.6 nm. The phase matching curve and the frequency-angular spectrum of mid-infrared photons were experimentally validated by measuring the properties of near-infrared photons. The brightness of the photon pair source was found to be (29.2± 1.1) MHzmW\frac{\text{MHz}}{\text{mW}}mWMHz​ in the low-gain regime, exceeding the values reported in previous studies using silver-gallium-sulfide crystals. The wide tunability of the photon source in the mid-infrared range is important for hyperspectral imaging and sensing, and it is of significant interest for biomedical, chemical, and environmental applications.
We demonstrate nondegenerate photon pair generation by spontaneous parametric downconversion in a silver gallium sulfide AgGaS2 crystal. By tuning the pump wavelength, we achieve phase matching over a large spectral range. This allows to generate idler photons in the mid-infrared spectral range above a 6 μm wavelength with corresponding signal photons in the visible. Also, we show photon pair generation with broad spectral bandwidth. These results are a valuable step toward the development of quantum imaging and sensing techniques in the mid-infrared.
Mid-infrared (mid-IR) spectra revealing the distinct “fingerprint” of molecules are of critical importance for both science and technology in chemistry, physics, materials science, and biology. Mid-IR sensing and spectroscopy provide unique and powerful tools for crucial applications in greenhouse gas monitoring, hazardous emission detection, and medical breath diagnosis. However, the low-photon energy characteristic of the mid-IR spectrum poses significant challenges for both mid-IR light sources and detectors, hindering their compact and cost-efficient applications in various areas. Here, we experimentally demonstrate mid-IR gas spectroscopy without mid-IR photons solely using convenient near-IR optical components. This is realized by generating photon pairs (i.e., a mid-IR photon and a near-IR one) through a spontaneous parametric downconversion in a microscale optical cavity. The generation rate of near-IR photons strongly relies on the absorption of the mid-IR photon due to their quantum correlation. Through interacting with evanescent fields around the microcavity, the absorptive mid-IR resonances of the surrounding gas greatly affect the detected near-IR photons without harassing any mid-IR photon. This scheme presents a cost-effective and compact solution for on-chip quantum gas spectroscopy without requiring expensive mid-IR lasers and detectors or lasers, thereby paving new avenues for applications in environmental monitoring/safety, healthcare, and agriculture.
The generation of single photons in the mid-infrared spectral region is attracting the interest of scientific and technological research, motivated by the potential improvements that many important and emerging applications, such as quantum sensing, metrology and communication, could benefit from. This review reports the progress in short and mid-infrared single photon generation, focusing on probabilistic sources based on the two non-linear processes of spontaneous parametric downconversion (SPDC) and four wave mixing (FWM). On one hand, numerical simulations of mid-infrared SPDC are described as a powerful tool to assist and guide the experimental realization, along with the implementation and engineering of novel non-linear materials. On the other hand, the advantages offered by FWM in silicon waveguides in terms of integration, miniaturization and manufacturability are presented, providing an optimal technology for integrated quantum applications.