Invasiveness of quantum measurements is a genuinely quantum mechanical feature that is not necessarily detrimental: Here we show how quantum measurements can be used to fuel a cooling engine. We illustrate quantum measurement cooling (QMC) by means of a prototypical two-stroke two-qubit engine which interacts with a measurement apparatus and two heat reservoirs at different temperatures. We show that feedback control is not necessary for operation while entanglement must be present in the measurement projectors. We quantify the probability that QMC occurs when the measurement basis is chosen randomly, and find that it can be very large as compared to the probability of extracting energy (heat engine operation), while remaining always smaller than the most useless operation, namely, dumping heat in both baths. These results show that QMC can be very robust to experimental noise. A possible low-temperature solid-state implementation that integrates circuit QED technology with circuit quantum thermodynamics technology is presented.
Invasiveness of quantum measurements is a genuinely quantum mechanical feature that is not necessarily detrimental: Here we show how quantum measurements can be used to fuel a cooling engine. We illustrate quantum measurement cooling (QMC) by means of a prototypical two-stroke two-qubit engine which interacts with a measurement apparatus and two heat reservoirs at different temperatures. We show that feedback control is not necessary for operation while entanglement must be present in the measurement projectors. We quantify the probability that QMC occurs when the measurement basis is chosen randomly, and find that it can be very large as compared to the probability of extracting energy (heat engine operation), while remaining always smaller than the most useless operation, namely, dumping heat in both baths. These results show that QMC can be very robust to experimental noise. A possible low-temperature solid-state implementation that integrates circuit QED technology with circuit quantum thermodynamics technology is presented.
Traditional refrigeration is driven either by external force or an information-feedback mechanism. Surprisingly, the quantum measurement and collapse, which are generally detrimental, can also be used to power a cooling engine even without requiring any feedback mechanism. In this work, we experimentally demonstrate quantum measurement cooling (QMC) powered by entangled measurement by using a novel linear optical simulator. In the simulator, different thermodynamic processes can be simulated by adjusting the energy-level spacing of working substance and the temperature of thermal bath. We show experimentally that, without prior knowledge about the measurement to be made, QMC remains likely to occur. We also demonstrate that QMC is robust against measurement noise. Those experimental results show that quantum measurement is not always detrimental but can be a valuable thermodynamic resource.
Traditional refrigeration is driven either by external forces or by the information-feedback mechanism. Surprisingly, quantum measurement and collapse, typically viewed as detrimental, can also power a quantum cooling engine without requiring any feedback mechanism. In this work, we perform a proof-of-principle demonstration of quantum measurement cooling (QMC) powered by entangled measurements using a highly controllable linear optical simulator. The simulator can simulate qubits with different energy-level spacings and their thermalizing processes at different temperatures, and also allows for arbitrary projections of two qubits at different energy levels. We show the effect of changes in energy levels and measurement bases on the cooling process and demonstrate the robustness of QMC. These results reveal the special role of entangled measurements in quantum thermodynamics, indicate that quantum measurement is not always detrimental but can be a valuable thermodynamic resource. Our setup also offers a highly controllable simulation platform for multiqubit quantum engines.
We investigate a quantum Otto engine (QOE) constructed from the two-qubit quantum Rabi model, operating within a cavity quantum electrodynamics (QED) architecture. The engine operates with two qubits as the working substance and a single non-Markovian hot thermal bath, modeled via the hierarchical equations of motion (HEOM) formalism. In place of a conventional cold thermal reservoir, the cooling stroke is realized through a projective measurement protocol on the cavity mode, which acts as an ancillary subsystem and effectively mimics a cold bath for the qubit working medium via measurement back-action. A squeezing drive applied to the cavity mode serves as a quantum fuel. We demonstrate that cavity squeezing systematically enhances both the power output and operational efficiency of the engine - the work extracted per unit of heat drawn from the hot bath-driving it above the standard quantum Otto limit. In the limit-cycle regime, the efficiency, while remaining above the Otto bound throughout, asymptotically converges to it from above. This identifies squeezing as a controllable quantum resource for thermodynamic optimization. Our results reveal that the interplay between qubit-cavity coupling, measurement-induced cooling, and non-equilibrium squeezing gives rise to a multi-resource thermodynamic architecture with performance characteristics inaccessible to conventional two-bath quantum Otto engines, thereby providing a concrete route toward experimentally realizable quantum heat engines in cavity QED platforms.
Quantum measurements are known to affect the state of the measured system. Such a measurement backaction is due to the interaction of the quantum system with the measuring device. When the measured observable and the system's Hamiltonian do not commute, the backaction can lead to a mean energy change of the system. This energy change has been dubbed "quantum heat" and, in association with feedback processes and/or the interaction with thermal bath(s), proves to be a genuinely quantum resource to fuel new kinds quantum engines. We propose such a measurement powered engine exploiting the non-commutativity of local and non-local operations on a bipartite quantum system.We then investigate the origin of the quantum heat. Even if one cannot model the full dynamics of a measurement due to the collapse of the wavefunction, the energetic aspects can still be investigated by modeling the so-called pre-measurement. During this step, the system interacts and gets correlated with a quantum system which can be viewed as a small part of the measuring apparatus and called the quantum meter. Ideally, at the end of this process, the system's reduced state will be fully decohered in the measurement basis, thus corresponding to the averaged collapsed output states given by the measurement postulate. We find that the quantum heat received by the measured system corresponds to the energy necessary to turn off the coupling between the meter and the system. Using generalized definitions of heat and work, we moreover characterize the work and heat nature of these energy exchanges.Tracing the source of this energy one step further, we propose an autonomous description of a measurement. This is done by considering a flying qubit measured by the quantum field of the cavity it crosses. The interaction being position dependent, the kinetic degree of freedom is providing the required energy to switch on and off the interaction between the qubit and the meter field. A full quantum treatment allows us to evaluate the impact of the finite spatial and momentum extension of the qubit wavepacket. Since the kinetic degree of freedom can be affected by the interaction, it does not simply generate a time dependent Hamiltonian for the other degrees of freedom. We find the correction to this ideal dynamic and analyse its consequences on the nature of the energy fluxes. %spread/extension/broadnessTaking the opposite point of view, we compare the measurement cost of a qubit by a field propagating in a waveguide, depending on the initial state of the field. In the context of a circuit quantum electrodynamics setup, we find that thermal and coherent fields induce the same backaction on the qubit given the same energy constraints.The results presented and discussed in this thesis contribute to unravel the mysterious effects and mechanisms due to quantum measurements. Notably, they give an outlook to further analyse quantum measurement-based engines and to understand the energetic resource that measurements cost and constitute at the same time.
The emerging field of quantum thermodynamics is beginning to reveal the intriguing role that information can play in quantum thermal engines. Information enters as a resource when considering feedback-controlled thermal machines. While both a general theory of quantum feedback control as well as specific examples of quantum feedback-controlled engines have been presented, still lacking is a general framework for such machines. Here, we present a framework for a generic, two-stroke quantum heat engine interacting with N thermal baths and Maxwell's demon. The demon performs projective measurements on the engine working substance, the outcome of which is recorded in a classical memory, embedded in its own thermal bath. To perform feedback control, the demon enacts unitary operations on the working substance, conditioned on the recorded outcome. By considering the compound machine-memory as a hybrid (classical-quantum) standard thermal machine interacting with N+1 thermal baths, our framework puts the working substance and memory on equal footing, thereby enabling a comprehensible resolution to Maxwell's paradox and elucidating the intricate manner in which information impacts the performance of quantum engines. We illustrate the application of our framework with a two-qubit engine. A remarkable observation is that more information does not necessarily result in better thermodynamic performance: sometimes knowing less is better.
We propose and analyze the theoretical model for a two-stroke quantum heat engine with one of the heat baths replaced by a non-selective quantum measurement. We show that the engine's invariant reference state depends on whether the cycle is monitored or unmonitored via diagnostic measurements to determine the engine's work output. We explore in detail the average work output and fluctuations of the proposed heat engine for the monitored and unmonitored cases. We also identify unitary work strokes for which the invariant states can support coherences in the energy basis leading to differing predictions for the average energy change during the unitary work strokes and the average work from the standard two-projective measurement approach.