Quantum computers will require encoding of quantum information to protect them from noise. Fault-tolerant quantum computing architectures illustrate how this might be done but have not yet shown a conclusive practical advantage. Here we demonstrate that a small but useful error detecting code improves the fidelity of the fault-tolerant gates implemented in the code space as compared to the fidelity of physically equivalent gates implemented on physical qubits. By running a randomized benchmarking protocol in the logical code space of the [4,2,2] code, we observe an order of magnitude improvement in the infidelity of the gates, with the two-qubit infidelity dropping from 5.8(2)% to 0.60(3)%. Our results are consistent with fault-tolerance theory and conclusively demonstrate the benefit of carrying out computation in a code space that can detect errors. Although the fault-tolerant gates offer an impressive improvement in fidelity, the computation as a whole is not below the fault-tolerance threshold because of noise associated with state preparation and measurement on this device.
Quantum computers will require encoding of quantum information to protect them from noise. Fault-tolerant quantum computing architectures illustrate how this might be done but have not yet shown a conclusive practical advantage. Here we demonstrate that a small but useful error detecting code improves the fidelity of the fault-tolerant gates implemented in the code space as compared to the fidelity of physically equivalent gates implemented on physical qubits. By running a randomized benchmarking protocol in the logical code space of the [4,2,2] code, we observe an order of magnitude improvement in the infidelity of the gates, with the two-qubit infidelity dropping from 5.8(2)% to 0.60(3)%. Our results are consistent with fault-tolerance theory and conclusively demonstrate the benefit of carrying out computation in a code space that can detect errors. Although the fault-tolerant gates offer an impressive improvement in fidelity, the computation as a whole is not below the fault-tolerance threshold because of noise associated with state preparation and measurement on this device.
Quantum computers will require encoding of quantum information to protect them from noise. Fault tolerant quantum computing architectures illustrate how this might be done, but have not yet shown a conclusive practical advantage. Here we demonstrate that a small but useful error detecting code improves the fidelity of the fault tolerant gates implemented in the code space as compared to the fidelity of physically equivalent gates implemented on physical qubits. By running a randomized benchmarking protocol in the logical code space of the [4,2,2] code, we observe an order of magnitude improvement in the infidelity of the gates, with the two-qubit infidelity dropping from 5.8(2)% to 0.60(3)%. Our results are consistent with fault tolerance theory and conclusively demonstrate the benefit of carrying out computation in a code space that can detect errors. Although the fault tolerant gates offer an impressive improvement in fidelity, the computation as a whole is not below the fault tolerance threshold because of noise associated with state preparation and measurement on this device.
Quantum error correction protects fragile quantum information by encoding it into a larger quantum system. These extra degrees of freedom enable the detection and correction of errors, but also increase the operational complexity of the encoded logical qubit. Fault-tolerant circuits contain the spread of errors while operating the logical qubit, and are essential for realizing error suppression in practice. While fault-tolerant design works in principle, it has not previously been demonstrated in an error-corrected physical system with native noise characteristics. In this work, we experimentally demonstrate fault-tolerant preparation, measurement, rotation, and stabilizer measurement of a Bacon-Shor logical qubit using 13 trapped ion qubits. When we compare these fault-tolerant protocols to non-fault tolerant protocols, we see significant reductions in the error rates of the logical primitives in the presence of noise. The result of fault-tolerant design is an average state preparation and measurement error of 0.6% and a Clifford gate error of 0.3% after error correction. Additionally, we prepare magic states with fidelities exceeding the distillation threshold, demonstrating all of the key single-qubit ingredients required for universal fault-tolerant operation. These results demonstrate that fault-tolerant circuits enable highly accurate logical primitives in current quantum systems. With improved two-qubit gates and the use of intermediate measurements, a stabilized logical qubit can be achieved.
This thesis is concerned with fault-tolerant quantum information processing using quantum error-correcting codes. It contains two major pieces of work. The first is a study of coherent noise in the context of stabilizer error-correcting codes. The second is a proposed scheme for a universal set of fault-tolerant logical gates in a particular code family built out of the 3D toric code. Chapter 1 provides an introduction to quantum computation and fault tolerance. Many basic concepts in error-correcting codes are defined. Special attention is paid to the set of code properties that are most likely to determine how easily a given fault-tolerant scheme might be implemented on a physical device. These include the fault-tolerant noise threshold and the overhead. In Chapters 2 and 3 we study the effectiveness of quantum error correction against coherent noise. Coherent errors (for example, unitary noise) can interfere constructively, so that in some cases the average infidelity of a quantum circuit subjected to coherent errors may increase quadratically with the circuit size; in contrast, when errors are incoherent (for example, depolarizing noise), the average infidelity increases at worst linearly with circuit size. We consider the performance of quantum stabilizer codes against a noise model in which a unitary rotation is applied to each qubit, where the axes and angles of rotation are nearly the same for all qubits. In Chapter 2 we introduce coherent noise and incoherent noise and a number of methods that are useful for the study of coherent noise. We study the repetition code as a basic example, and we also study a correlated noise model. In Chapter 3 we show that for the toric code subject to such independent coherent noise, and for minimal-weight decoding, the logical channel after error correction becomes increasingly incoherent as the length of the code increases, provided the noise strength decays inversely with the code distance. A similar conclusion holds for weakly correlated coherent noise. Our methods can also be used for analyzing the performance of other codes and fault-tolerant protocols against coherent noise. However, our result does not show that the coherence of the logical channel is suppressed in the more physically relevant case where the noise strength is held constant as the code block grows, and we recount the difficulties that prevented us from extending the result to that case. Nevertheless our work supports the idea that fault-tolerant quantum computing schemes will work effectively against coherent noise, providing encouraging news for quantum hardware builders who worry about the damaging effects of control errors and coherent interactions with the environment. Chapter 4 is connected to another aspect of fault tolerance, fault-tolerant logical gates. The toric code is a promising candidate for fault-tolerant quantum computation because of its high threshold and low-weight stabilizers. A universal gate set in the toric code generally requires magic state distillation, which can incur a significant qubit overhead. In this work we construct an error-correcting code in three dimensions based on the toric code that features a fault-tolerant T gate with no magic state distillation required. We further describe a subsystem version of our code which supports a universal set of fault-tolerant gates. This code can be converted into the stabilizer version using gauge-fixing. We also argue that our code can be converted to a (2+1)-D protocol, where a 2D lattice undergoes a measurement-based protocol over time. In this way, a fault-tolerant logical T gate can be realized in a 2D toric code structure.
A fully fault-tolerant implementation of the quantum error-detecting Iceberg [[2m,2m−2,2]] code applied to a Toffoli circuit achieved beyond-break-even error detection on a leading trapped-ion quantum computer, where the effect of encoding a circuit with a quantum error-detection code enables increased fidelity compared to an unencoded circuit. This code was also applied to Bell state preparation circuits, where a lean non-fault-tolerant implementation of the Iceberg code enables a fidelity gain as well. This highlights the important point that, at least for small-scale circuits with a substantial portion of error-free runs, it can be effective simply to use error detection to filter out the runs with errors. Furthermore, experiments performed in this work highlight the necessity for judicious compilation of circuits not only for a given hardware but also within a quantum error detection code.
Quantumcomputation is the modern version of Schrödinger’s cat experiment. It is backed up in principle by the theory and thinking about it can make people equally uncomfortable and excited. Besides, its practical realization seems so extremely challenging that some people even doubt it is possible. On the other hand, we are nowadays much closer to realizing quantum computation and in addition, it has much more implications than Schrödinger’s original cat experiment. One of the major difficulties in realizing quantum computation is the inevitable presence of noise in realistic quantum devices which makes the direct realization of quantum computers impossible. In order to protect quantum information and quantum processes against noise, quantum error correction and fault-tolerance have been devised. Although the gap between experiments and the requirements of fault-tolerance is still daunting, the field of quantum error correction and fault-tolerance extends and influences architectural decisions from the hardware to the ideal quantum programs that we want to run. That is why it has the potential to make or break the practicality of quantum computation and a lot of research effort goes into this field. In this thesis we investigate and improve several aspects of fault-tolerant schemes and quantum error correction. We implement an experiment which validates on a small device the usefulness of fault-tolerance for quantum computation. We investigate the advantages of harnessing quantum continuous degrees of freedom present in the lab to protect discrete quantum information in a scalable way. We establish a framework to analyze the fault-tolerant properties of code deformation techniques which are versatile techniques to process quantum information protected by an error correcting code. We also present some novel code deformation techniques with the potential to increase reliability. Finally we define a new class of quantum error correcting codes, quantum pin codes, with built in capabilities for fault-tolerant quantum gates. We give some practical constructions and show some protocols with interesting parameters. The roads towards universal and fault-tolerant quantum computation are still steep but research efforts are pushing in the right directions.
Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit.
We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.