Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1805.07202 · Physical Review A

Multistage Zeeman deceleration of atomic and molecular oxygen

Theo Cremers, Simon Chefdeville, Vikram Plomp, Niek Janssen, Edwin Sweers, Sebastiaan Y. T. van de Meerakker

Published Sep 6, 2018• 18 citations
arXivHTMLPDF

Abstract

Multistage Zeeman deceleration is a technique used to reduce the velocity of neutral molecules with a magnetic-dipole moment. Here we present a Zeeman decelerator that consists of 100 solenoids and 100 magnetic hexapoles that is based on a short prototype design presented recently [Phys. Rev. A 95, 043415 (2017)]. The decelerator features a modular design with excellent thermal and vacuum properties and is robustly operated at a 10 Hz repetition rate. We use this decelerator to demonstrate the state-selective deceleration of atomic oxygen to final mean velocities in the range 500--125 m/s. We further characterize our decelerator with molecular oxygen, which, despite its heavier mass, is velocity tuned in the range 350--150 m/s. This corresponds to a maximum kinetic-energy reduction of 95% and 80% for atomic and molecular oxygen, respectively. The long multistage Zeeman decelerator presented here demonstrates that the concept of using alternating hexapoles and solenoids is truly phase stable. This Zeeman decelerator is ideally suited for applications in crossed-beam scattering experiments; the state-selected and velocity-controlled samples of O atoms and ${\mathrm{O}}_{2}$ molecules are particularly relevant for studies of inelastic and reactive processes.

DOI
10.1103/physreva.98.033406

Related papers

Design and construction of a multistage Zeeman decelerator for crossed molecular beams scattering experiments

Theo Cremers, Niek Janssen, Edwin Sweers +1 more

Zeeman deceleration is a relatively new technique used to obtain full control over the velocity of paramagnetic atoms or molecules in a molecular beam. We present a detailed description of a multistage Zeeman decelerator that has recently become operational in our laboratory [Cremers et al., Phys. Rev. A 98, 033406 (2018)] and that is specifically optimized for crossed molecular beams scattering experiments. The decelerator consists of an alternating array of 100 solenoids and 100 permanent hexapoles to guide or decelerate beams of paramagnetic atoms or molecules. The Zeeman decelerator features a modular design that is mechanically easy to extend to arbitrary length and allows for solenoid and hexapole elements that are convenient to replace. The solenoids and associated electronics are efficiently water cooled and allow the Zeeman decelerator to operate at repetition rates exceeding 10 Hz. We characterize the performance of the decelerator using various beams of metastable rare gas atoms. Imaging of the atoms that exit the Zeeman decelerator reveals the transverse focusing properties of the hexapole array in the Zeeman decelerator.

arXiv:1901.02643•Review of Scientific Instruments•Jan 1, 2019•23 citations

Multistage Zeeman decelerator for molecular-scattering studies

Theo Cremers, Simon Chefdeville, Niek Janssen +4 more

We present a concept for a multistage Zeeman decelerator that is optimized particularly for applications in molecular beam scattering experiments. The decelerator consists of a series of alternating hexapoles and solenoids, that effectively decouple the transverse focusing and longitudinal deceleration properties of the decelerator. It can be operated in a deceleration and acceleration mode, as well as in a hybrid mode that makes it possible to guide a particle beam through the decelerator at constant speed. The deceleration features phase stability, with a relatively large six-dimensional phase-space acceptance. The separated focusing and deceleration elements result in an unequal partitioning of this acceptance between the longitudinal and transverse directions. This is ideal in scattering experiments, which typically benefit from a large longitudinal acceptance combined with narrow transverse distributions. We demonstrate the successful experimental implementation of this concept using a Zeeman decelerator consisting of an array of 25 hexapoles and 24 solenoids. The performance of the decelerator in acceleration, deceleration, and guiding modes is characterized using beams of metastable helium ($^{3}S$) atoms. Up to 60% of the kinetic energy was removed for He atoms that have an initial velocity of 520 m/s. The hexapoles consist of permanent magnets, whereas the solenoids are produced from a single hollow copper capillary through which cooling liquid is passed. The solenoid design allows for excellent thermal properties and enables the use of readily available and cheap electronics components to pulse high currents through the solenoids. The Zeeman decelerator demonstrated here is mechanically easy to build, can be operated with cost-effective electronics, and can run at repetition rates up to 10 Hz.

arXiv:1702.05477•Physical Review A•Apr 19, 2017•24 citations

Multistage Zeeman deceleration of atoms and molecules

A. W. Wiederkehr

A modular multistage Zeeman decelerator consisting of an array of solenoids has been developed to control the velocity of cold, paramagnetic atoms and molecules in supersonic beams. The translational motion these atoms and molecules was manipulated with high precision by exploiting the interaction between their magnetic moments and timedependent inhomogeneous magnetic elds. Deceleration was achieved by pulsing high currents (up to 300 A) through the solenoids of the decelerator with pulse sequences calculated to preserve the phase-space density of the atomic and molecular samples while removing a preset amount of kinetic energy. For the operation of the multistage Zeeman decelerator, solenoids and electronic units were developed to generate strong magneticeld pulses (> 2 T) with rise and fall times of only a few microseconds. An accurate three-dimensional particle-trajectory simulation program has been developed to analyze the deceleration process and optimize its e ciency. This software was thoroughly tested by systematic comparison with experimental results and enabled, in combination with measurements, the complete characterization of the spatial and velocity distributions of the decelerated and trapped atoms for di erent sets of experimental conditions. The program was essential to achieve a complete interpretation of the dynamics of the deceleration process and to devise a strategy to e ciently load the decelerated atoms and molecules into magnetic quadrupole traps. In a rst experiment, hydrogen atoms seeded in a supersonic expansion of Kr have been decelerated from an initial velocity of 435 m/s to nal velocities as low as 107 m/s in a 12-stage Zeeman decelerator. The operation of the decelerator has been analyzed by comparing the results of numerical particle-trajectory simulations with those of independent measurements of the velocity distribution by ion time-ofight mass spectrometry following photoionization of the decelerated atoms. The velocity distribution of the decelerated atom cloud was found to have a half width at half maximum of 25± 12 m/s corresponding to a temperature of ∼ 40 mK. The phase stability of the multistage-Zeeman-deceleration process has been investigated by numerical particle-trajectory simulations and experimental measurements on deuterium atoms in a 24-stage Zeeman decelerator. A one-dimensional analytical model of the phase stability in a multistage Zeeman decelerator was adapted from a one-dimensional model of phase stability in a multistage Stark decelerator and compared with the results of oneand three-dimensional particle-trajectory simulations. The comparison, which included the analysis of the e ects of nite switch-on and switch-o times of the deceleration pulses, revealed that transverse e ects in the decelerator lead to a considerable reduction of the

•Jan 1, 2012•0 citations

A new concept multi-stage Zeeman decelerator: experimental implementation

Theo Cremers, Simon Chefdeville, Niek Janssen +4 more

We demonstrate the successful experimental implementation of a multi-stage Zeeman decelerator utilizing the new concept described in the accompanying paper. The decelerator consists of an array of 25 hexapoles and 24 solenoids. The performance of the decelerator in acceleration, deceleration and guiding modes is characterized using beams of metastable Helium ($^3S$) atoms. Up to 60% of the kinetic energy was removed for He atoms that have an initial velocity of 520 m/s. The hexapoles consist of permanent magnets, whereas the solenoids are produced from a single hollow copper capillary through which cooling liquid is passed. The solenoid design allows for excellent thermal properties, and enables the use of readily available and cheap electronics components to pulse high currents through the solenoids. The Zeeman decelerator demonstrated here is mechanically easy to build, can be operated with cost-effective electronics, and can run at repetition rates up to 10 Hz.

arXiv:1702.04223•Feb 14, 2017•0 citations

Multistage Zeeman deceleration of metastable neon

A. W. Wiederkehr, M. Motsch, S. D. Hogan +5 more

A supersonic beam of metastable neon atoms has been decelerated by exploiting the interaction between the magnetic moment of the atoms and time-dependent inhomogeneous magnetic fields in a multistage Zeeman decelerator. Using 91 deceleration solenoids, the atoms were decelerated from an initial velocity of 580m/s to final velocities as low as 105m/s, corresponding to a removal of more than 95% of their initial kinetic energy. The phase-space distribution of the cold, decelerated atoms was characterized by time-of-flight and imaging measurements, from which a temperature of 10mK was obtained in the moving frame of the decelerated sample. In combination with particle-trajectory simulations, these measurements allowed the phase-space acceptance of the decelerator to be quantified. The degree of isotope separation that can be achieved by multistage Zeeman deceleration was also studied by performing experiments with pulse sequences generated for ²⁰Ne and ²²Ne. © 2011 American Institute of Physics.

•Dec 7, 2011•19 citations

Towards the study of cold chemical reactions using Zeeman decelerated supersonic beams

Katrin Dulitz

Zeeman deceleration is an experimental technique which allows for the manipulation of open-shell atoms and molecules in a supersonic beam thus producing mK-cold, velocity-tunable beams of particles in selected quantum states. The method relies on the Zeeman interaction between paramagnetic particles and time-varying, inhomogeneous magnetic fields generated by pulsing high currents through an array of solenoid coils. This thesis describes the construction and implementation of a supersonic beam setup including a 12-stage Zeeman decelerator. The Zeeman decelerator follows an original design that makes it possible to replace individual deceleration coils. Using ground-state hydrogen atoms as a test system, it is shown that the transverse acceptance in a Zeeman decelerator can be significantly increased by generating a rather low, temporally varying quadrupole field in one of the solenoid coils. An electron-impact source was constructed and optimised enabling, for the first time, the Zeeman deceleration of metastable helium atoms in the 23S1 state, with an up to 40 % decrease in the kinetic energy of the beam. It is shown that the pulse duration for electron-impact excitation needs to be matched to the acceptance of the decelerator in order to attain a good contrast between the decelerated and undecelerated parts of the beam. Experimental results are rigorously analysed and interpreted using three-dimensional numerical particle trajectory simulations. A phase-space model provides, for the first time, a means to estimate the six-dimensional phase-space acceptance in a Zeeman decelerator and to find optimum parameter sets for improved Zeeman deceleration schemes. The approach also reveals a hitherto unconsidered velocity dependence of the phase stability which is ascribed mainly to the rise and fall times of the current pulses that generate the magnetic fields inside the deceleration coils. In the future, it is planned to combine the Zeeman decelerator with a source of cold atomic and molecular ions to study chemical collisions at low temperatures. A hybrid magnetic guide consisting of permanent magnet assemblies (Halbach arrays) in hexapole configuration and a set of current-carrying wires is proposed and simulated as an interface between these setups. The design promises very efficient velocity selection, a high degree of quantum-state selection and a nearly complete removal of residual carrier gas. Prospects for using magnetic hexapole focusing in front of the Zeeman decelerator are discussed. The work represents a major step towards the study and control of chemical reactivity of paramagnetic species in the low-temperature regime and it will help in the testing of fundamental chemical reaction theories.

•Jan 1, 2014•2 citations
Multistage Zeeman deceleration is a technique used to reduce the velocity of neutral molecules with a magnetic-dipole moment. Here we present a Zeeman decelerator that consists of 100 solenoids and 100 magnetic hexapoles that is based on a short prototype design presented recently [Phys. Rev. A 95, 043415 (2017)]. The decelerator features a modular design with excellent thermal and vacuum properties and is robustly operated at a 10 Hz repetition rate. We use this decelerator to demonstrate the state-selective deceleration of atomic oxygen to final mean velocities in the range 500--125 m/s. We further characterize our decelerator with molecular oxygen, which, despite its heavier mass, is velocity tuned in the range 350--150 m/s. This corresponds to a maximum kinetic-energy reduction of 95% and 80% for atomic and molecular oxygen, respectively. The long multistage Zeeman decelerator presented here demonstrates that the concept of using alternating hexapoles and solenoids is truly phase stable. This Zeeman decelerator is ideally suited for applications in crossed-beam scattering experiments; the state-selected and velocity-controlled samples of O atoms and O2{\mathrm{O}}_{2}O2​ molecules are particularly relevant for studies of inelastic and reactive processes.
Zeeman deceleration is a relatively new technique used to obtain full control over the velocity of paramagnetic atoms or molecules in a molecular beam. We present a detailed description of a multistage Zeeman decelerator that has recently become operational in our laboratory [Cremers et al., Phys. Rev. A 98, 033406 (2018)] and that is specifically optimized for crossed molecular beams scattering experiments. The decelerator consists of an alternating array of 100 solenoids and 100 permanent hexapoles to guide or decelerate beams of paramagnetic atoms or molecules. The Zeeman decelerator features a modular design that is mechanically easy to extend to arbitrary length and allows for solenoid and hexapole elements that are convenient to replace. The solenoids and associated electronics are efficiently water cooled and allow the Zeeman decelerator to operate at repetition rates exceeding 10 Hz. We characterize the performance of the decelerator using various beams of metastable rare gas atoms. Imaging of the atoms that exit the Zeeman decelerator reveals the transverse focusing properties of the hexapole array in the Zeeman decelerator.
We present a concept for a multistage Zeeman decelerator that is optimized particularly for applications in molecular beam scattering experiments. The decelerator consists of a series of alternating hexapoles and solenoids, that effectively decouple the transverse focusing and longitudinal deceleration properties of the decelerator. It can be operated in a deceleration and acceleration mode, as well as in a hybrid mode that makes it possible to guide a particle beam through the decelerator at constant speed. The deceleration features phase stability, with a relatively large six-dimensional phase-space acceptance. The separated focusing and deceleration elements result in an unequal partitioning of this acceptance between the longitudinal and transverse directions. This is ideal in scattering experiments, which typically benefit from a large longitudinal acceptance combined with narrow transverse distributions. We demonstrate the successful experimental implementation of this concept using a Zeeman decelerator consisting of an array of 25 hexapoles and 24 solenoids. The performance of the decelerator in acceleration, deceleration, and guiding modes is characterized using beams of metastable helium (3S^{3}S3S) atoms. Up to 60% of the kinetic energy was removed for He atoms that have an initial velocity of 520 m/s. The hexapoles consist of permanent magnets, whereas the solenoids are produced from a single hollow copper capillary through which cooling liquid is passed. The solenoid design allows for excellent thermal properties and enables the use of readily available and cheap electronics components to pulse high currents through the solenoids. The Zeeman decelerator demonstrated here is mechanically easy to build, can be operated with cost-effective electronics, and can run at repetition rates up to 10 Hz.
A modular multistage Zeeman decelerator consisting of an array of solenoids has been developed to control the velocity of cold, paramagnetic atoms and molecules in supersonic beams. The translational motion these atoms and molecules was manipulated with high precision by exploiting the interaction between their magnetic moments and timedependent inhomogeneous magnetic elds. Deceleration was achieved by pulsing high currents (up to 300 A) through the solenoids of the decelerator with pulse sequences calculated to preserve the phase-space density of the atomic and molecular samples while removing a preset amount of kinetic energy. For the operation of the multistage Zeeman decelerator, solenoids and electronic units were developed to generate strong magneticeld pulses (> 2 T) with rise and fall times of only a few microseconds. An accurate three-dimensional particle-trajectory simulation program has been developed to analyze the deceleration process and optimize its e ciency. This software was thoroughly tested by systematic comparison with experimental results and enabled, in combination with measurements, the complete characterization of the spatial and velocity distributions of the decelerated and trapped atoms for di erent sets of experimental conditions. The program was essential to achieve a complete interpretation of the dynamics of the deceleration process and to devise a strategy to e ciently load the decelerated atoms and molecules into magnetic quadrupole traps. In a rst experiment, hydrogen atoms seeded in a supersonic expansion of Kr have been decelerated from an initial velocity of 435 m/s to nal velocities as low as 107 m/s in a 12-stage Zeeman decelerator. The operation of the decelerator has been analyzed by comparing the results of numerical particle-trajectory simulations with those of independent measurements of the velocity distribution by ion time-ofight mass spectrometry following photoionization of the decelerated atoms. The velocity distribution of the decelerated atom cloud was found to have a half width at half maximum of 25± 12 m/s corresponding to a temperature of ∼ 40 mK. The phase stability of the multistage-Zeeman-deceleration process has been investigated by numerical particle-trajectory simulations and experimental measurements on deuterium atoms in a 24-stage Zeeman decelerator. A one-dimensional analytical model of the phase stability in a multistage Zeeman decelerator was adapted from a one-dimensional model of phase stability in a multistage Stark decelerator and compared with the results of oneand three-dimensional particle-trajectory simulations. The comparison, which included the analysis of the e ects of nite switch-on and switch-o times of the deceleration pulses, revealed that transverse e ects in the decelerator lead to a considerable reduction of the
We demonstrate the successful experimental implementation of a multi-stage Zeeman decelerator utilizing the new concept described in the accompanying paper. The decelerator consists of an array of 25 hexapoles and 24 solenoids. The performance of the decelerator in acceleration, deceleration and guiding modes is characterized using beams of metastable Helium (3S^3S3S) atoms. Up to 60% of the kinetic energy was removed for He atoms that have an initial velocity of 520 m/s. The hexapoles consist of permanent magnets, whereas the solenoids are produced from a single hollow copper capillary through which cooling liquid is passed. The solenoid design allows for excellent thermal properties, and enables the use of readily available and cheap electronics components to pulse high currents through the solenoids. The Zeeman decelerator demonstrated here is mechanically easy to build, can be operated with cost-effective electronics, and can run at repetition rates up to 10 Hz.
A supersonic beam of metastable neon atoms has been decelerated by exploiting the interaction between the magnetic moment of the atoms and time-dependent inhomogeneous magnetic fields in a multistage Zeeman decelerator. Using 91 deceleration solenoids, the atoms were decelerated from an initial velocity of 580m/s to final velocities as low as 105m/s, corresponding to a removal of more than 95% of their initial kinetic energy. The phase-space distribution of the cold, decelerated atoms was characterized by time-of-flight and imaging measurements, from which a temperature of 10mK was obtained in the moving frame of the decelerated sample. In combination with particle-trajectory simulations, these measurements allowed the phase-space acceptance of the decelerator to be quantified. The degree of isotope separation that can be achieved by multistage Zeeman deceleration was also studied by performing experiments with pulse sequences generated for ²⁰Ne and ²²Ne. © 2011 American Institute of Physics.
Zeeman deceleration is an experimental technique which allows for the manipulation of open-shell atoms and molecules in a supersonic beam thus producing mK-cold, velocity-tunable beams of particles in selected quantum states. The method relies on the Zeeman interaction between paramagnetic particles and time-varying, inhomogeneous magnetic fields generated by pulsing high currents through an array of solenoid coils. This thesis describes the construction and implementation of a supersonic beam setup including a 12-stage Zeeman decelerator. The Zeeman decelerator follows an original design that makes it possible to replace individual deceleration coils. Using ground-state hydrogen atoms as a test system, it is shown that the transverse acceptance in a Zeeman decelerator can be significantly increased by generating a rather low, temporally varying quadrupole field in one of the solenoid coils. An electron-impact source was constructed and optimised enabling, for the first time, the Zeeman deceleration of metastable helium atoms in the 23S1 state, with an up to 40 % decrease in the kinetic energy of the beam. It is shown that the pulse duration for electron-impact excitation needs to be matched to the acceptance of the decelerator in order to attain a good contrast between the decelerated and undecelerated parts of the beam. Experimental results are rigorously analysed and interpreted using three-dimensional numerical particle trajectory simulations. A phase-space model provides, for the first time, a means to estimate the six-dimensional phase-space acceptance in a Zeeman decelerator and to find optimum parameter sets for improved Zeeman deceleration schemes. The approach also reveals a hitherto unconsidered velocity dependence of the phase stability which is ascribed mainly to the rise and fall times of the current pulses that generate the magnetic fields inside the deceleration coils. In the future, it is planned to combine the Zeeman decelerator with a source of cold atomic and molecular ions to study chemical collisions at low temperatures. A hybrid magnetic guide consisting of permanent magnet assemblies (Halbach arrays) in hexapole configuration and a set of current-carrying wires is proposed and simulated as an interface between these setups. The design promises very efficient velocity selection, a high degree of quantum-state selection and a nearly complete removal of residual carrier gas. Prospects for using magnetic hexapole focusing in front of the Zeeman decelerator are discussed. The work represents a major step towards the study and control of chemical reactivity of paramagnetic species in the low-temperature regime and it will help in the testing of fundamental chemical reaction theories.