Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1804.00928 · Review of Scientific Instruments

Photon counting with photon number resolution through superconducting nanowires coupled to a multi-channel TDC in FPGA

N. Lusardi, Johannes W. N. Los, R. B. M. Gourgues, Gabriele Bulgarini, A. Geraci

Published Mar 1, 2017• 25 citations
arXivHTMLPDF

Abstract

The paper presents a system for measuring photon statistics and photon timing in the few-photon regime down to the single-photon level. The measurement system is based on superconducting nanowire single photon detectors and a time-to-digital converter implemented into a programmable device. The combination of these devices gives high performance to the system in terms of resolution and adaptability to the actual experimental conditions. As a case of application, we present the measurement of photon statistics for coherent light states. In this measurement, we make use of 8th order single photon correlations to reconstruct with high fidelity the statistics of a coherent state with average photon number up to 4. The processing is performed by means of a tapped-delay-line time-to-digital converter architecture that also hosts an asynchronous-correlated-digital-counter implemented in a field programmable gate array device and specifically designed for performance optimization in multi-channel usage.

DOI
10.1063/1.4977594

Related papers

Array of superconducting nanowire single photon detectors resolving the number of photons in a weak optical pulse

Nicola Lusardi, A. Geraci, Ronan Gourgues +2 more

Determining the precise number of photons in a weak optical pulse is of crucial importance for imaging, computing or communication applications that use single photons or few photons to increase the performance of classical techniques. Single photons or pair of photons can for instance be used to enhance the resolution of optical imaging techniques or to transmit information with ultimate security using quantum cryptography. In order to maintain this performance gain in such applications, the exact number of photons must be measured and monitored. In this contribution we present a method to measure the number of photons in an optical pulse by using 7 superconducting nanowire single photon detectors. Since a single SNSPD is not sensitive to the number of incoming photons, the optical signal multiplexing is necessary to measure photon correlations among the channels and thus reconstruct the input photons statistics. The readout and counting of the photon arrivals is performed with a fast multi-channel Asynchronous-Correlated-Digital-Counter (ACDC) implemented in the Programmable Logic (PL) of a Xilinx ZYNQ-7020 SoC device. The test of the technique has been performed coupling a weak laser via a fiber multiplexer to an array of individually fiber-coupled detectors.

IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)•Oct 1, 2016•4 citations

Photon-number-resolution with sub-30-ps timing using multi-element superconducting nanowire single photon detectors

Eric A. Dauler, Andrew J. Kerman, Bryan S. Robinson +5 more

A photon-number-resolving detector based on a four-element superconducting nanowire single photon detector is demonstrated to have sub-30-ps resolution in measuring the arrival time of individual photons. This detector can be used to characterise the photon statistics of non-pulsed light sources and to mitigate dead-time effects in high-speed photon counting applications. Furthermore, a 25% system detection efficiency at 1550 nm was demonstrated, making the detector useful for both low-flux source characterization and high-speed photon counting and quantum communication applications. The design, fabrication, and testing of this detector are described, and a comparison between the measured and the theoretical performance is presented.

arXiv:0805.2397•Journal of Modern Optics•Jan 15, 2009•139 citations

A Precise High Count-Rate FPGA Based Multi-Channel Coincidence Counting System for Quantum Photonics Applications

E. Arabul, Stefano Paesani, Scott Tancock +2 more

Coincidence counters play the role of gating events from the background noise in almost every quantum photonics setup. Precise multi-channel and high count-rate coincidence counting tools have become desirable due to an increase in the complexity of quantum photonics experiments. However, timing analyzers are struggling to meet these needs. We are proposing a Field Programmable Gate Array (FPGA) based coincidence counting system which provides 8 operational channels with 8.9 ps root mean square (RMS) resolution (with a bin width of 7.7 ps) and a count-rate of 320 million counts per second (MCPS) (with 40 MCPS per channel). We have successfully tested our design in different quantum photonics scenarios such as the detection of two-photon interference and pseudo-photon-number resolving detection of a coherent state of light where it has shown its capability of working beyond the saturation of detectors. Also, we have introduced a Dual Data Rate Registration TDC, which improved the linearity of the time tagging operation by using both clock edges without increasing the dead-time or using the space excessively. 1.2 LSB in max DNL error, 1.8 LSB in max INL error, 10 ps in FWHM and 3.2 ps in RMS resolution improvements were achieved.

IEEE photonics journal•Jan 22, 2020•17 citations

Scaling waveguide-integrated superconducting nanowire single-photon detector solutions to large numbers of independent optical channels

Matthias Häußler, Robin Terhaar, Martin A. Wolff +11 more

Superconducting nanowire single-photon detectors are an enabling technology for modern quantum information science and are gaining attractiveness for the most demanding photon counting tasks in other fields. Embedding such detectors in photonic integrated circuits enables additional counting capabilities through nanophotonic functionalization. Here, we show how a scalable number of waveguide-integrated superconducting nanowire single-photon detectors can be interfaced with independent fiber optic channels on the same chip. Our plug-and-play detector package is hosted inside a compact and portable closed-cycle cryostat providing cryogenic signal amplification for up to 64 channels. We demonstrate state-of-the-art multi-channel photon counting performance with average system detection efficiency of (40.5 ± 9.4)% and dark count rate of (123 ± 34) Hz for 32 individually addressable detectors at minimal noise-equivalent power of (5.1 ± 1.2) · 10−18 W/Hz. Our detectors achieve timing jitter as low as 26 ps, which increases to (114 ± 17) ps for high-speed multi-channel operation using dedicated time-correlated single photon counting electronics. Our multi-channel single photon receiver offers exciting measurement capabilities for future quantum communication, remote sensing, and imaging applications.

arXiv:2207.12060•Review of Scientific Instruments•Jan 1, 2023•23 citations

Resolving Photon Numbers Using Ultra-High-Resolution Timing of a Single Low-Jitter Superconducting Nanowire Detector

Sauer, Gregor, Mirco Kolarczik, Rodrigo Gómez +2 more

Photon-number-resolving (PNR) detectors are a key enabling technology in photonic quantum information processing. Here, we demonstrate the PNR capacity of conventional superconducting nanowire single-photon detectors by performing ultra-high-resolution time-tagging of the detector-generated electrical pulses. This method provides a viable approach for PNR with high detection efficiency and a high operational repetition rate. We present the implementation of such a PNR detector in the telecom C-band and its characterization by measuring the photon-number statistics of coherent light with tunable intensity. Additionally, we demonstrate the capabilities of the detection method by measuring photon-number correlations of non-classical states.

arXiv:2310.12472•Oct 19, 2023•5 citations

Superconducting nanowire multi-photon detectors enabled by current reservoirs

Kai Zou, Yun Meng, Zhao Wang +1 more

Single-photon detectors are ubiquitous devices in quantum-photonic-based communication, computation, metrology, and sensing. In these applications, N -fold coincidence photon counting is often needed, for example, to characterize entanglement. However, N -fold coincidence photon counting typically requires N individual single-photon detectors and associated bias and readout electronics, and these resources could become prohibitive if N goes large and the detectors need to work at cryogenic temperatures. Here, to break this limit on N , we propose a device architecture based on N cascaded photosensitive superconducting nanowires and one wider nanowire that functions as a current reservoir. We show that by strategically designing the device, the network of these superconducting nanowires can work in a synergic manner as an n -photon detector, where n can be from 1 to N , depending on the bias conditions. We therefore name the devices of this type superconducting nanowire multi-photon detectors (SNMPDs). In addition to its simple one-port bias and readout circuitry, the coincidences are counted internally in the detector, eliminating the need for external multi-channel, time-correlated pulse counters. We believe that the SNMPDs proposed in this work could open avenues towards conveniently measuring high-order temporal correlations of light and characterizing multi-photon entanglement.

Photonics Research•Feb 19, 2020•11 citations
The paper presents a system for measuring photon statistics and photon timing in the few-photon regime down to the single-photon level. The measurement system is based on superconducting nanowire single photon detectors and a time-to-digital converter implemented into a programmable device. The combination of these devices gives high performance to the system in terms of resolution and adaptability to the actual experimental conditions. As a case of application, we present the measurement of photon statistics for coherent light states. In this measurement, we make use of 8th order single photon correlations to reconstruct with high fidelity the statistics of a coherent state with average photon number up to 4. The processing is performed by means of a tapped-delay-line time-to-digital converter architecture that also hosts an asynchronous-correlated-digital-counter implemented in a field programmable gate array device and specifically designed for performance optimization in multi-channel usage.
Determining the precise number of photons in a weak optical pulse is of crucial importance for imaging, computing or communication applications that use single photons or few photons to increase the performance of classical techniques. Single photons or pair of photons can for instance be used to enhance the resolution of optical imaging techniques or to transmit information with ultimate security using quantum cryptography. In order to maintain this performance gain in such applications, the exact number of photons must be measured and monitored. In this contribution we present a method to measure the number of photons in an optical pulse by using 7 superconducting nanowire single photon detectors. Since a single SNSPD is not sensitive to the number of incoming photons, the optical signal multiplexing is necessary to measure photon correlations among the channels and thus reconstruct the input photons statistics. The readout and counting of the photon arrivals is performed with a fast multi-channel Asynchronous-Correlated-Digital-Counter (ACDC) implemented in the Programmable Logic (PL) of a Xilinx ZYNQ-7020 SoC device. The test of the technique has been performed coupling a weak laser via a fiber multiplexer to an array of individually fiber-coupled detectors.
A photon-number-resolving detector based on a four-element superconducting nanowire single photon detector is demonstrated to have sub-30-ps resolution in measuring the arrival time of individual photons. This detector can be used to characterise the photon statistics of non-pulsed light sources and to mitigate dead-time effects in high-speed photon counting applications. Furthermore, a 25% system detection efficiency at 1550 nm was demonstrated, making the detector useful for both low-flux source characterization and high-speed photon counting and quantum communication applications. The design, fabrication, and testing of this detector are described, and a comparison between the measured and the theoretical performance is presented.
Coincidence counters play the role of gating events from the background noise in almost every quantum photonics setup. Precise multi-channel and high count-rate coincidence counting tools have become desirable due to an increase in the complexity of quantum photonics experiments. However, timing analyzers are struggling to meet these needs. We are proposing a Field Programmable Gate Array (FPGA) based coincidence counting system which provides 8 operational channels with 8.9 ps root mean square (RMS) resolution (with a bin width of 7.7 ps) and a count-rate of 320 million counts per second (MCPS) (with 40 MCPS per channel). We have successfully tested our design in different quantum photonics scenarios such as the detection of two-photon interference and pseudo-photon-number resolving detection of a coherent state of light where it has shown its capability of working beyond the saturation of detectors. Also, we have introduced a Dual Data Rate Registration TDC, which improved the linearity of the time tagging operation by using both clock edges without increasing the dead-time or using the space excessively. 1.2 LSB in max DNL error, 1.8 LSB in max INL error, 10 ps in FWHM and 3.2 ps in RMS resolution improvements were achieved.
Superconducting nanowire single-photon detectors are an enabling technology for modern quantum information science and are gaining attractiveness for the most demanding photon counting tasks in other fields. Embedding such detectors in photonic integrated circuits enables additional counting capabilities through nanophotonic functionalization. Here, we show how a scalable number of waveguide-integrated superconducting nanowire single-photon detectors can be interfaced with independent fiber optic channels on the same chip. Our plug-and-play detector package is hosted inside a compact and portable closed-cycle cryostat providing cryogenic signal amplification for up to 64 channels. We demonstrate state-of-the-art multi-channel photon counting performance with average system detection efficiency of (40.5 ± 9.4)% and dark count rate of (123 ± 34) Hz for 32 individually addressable detectors at minimal noise-equivalent power of (5.1 ± 1.2) · 10−18 W/Hz. Our detectors achieve timing jitter as low as 26 ps, which increases to (114 ± 17) ps for high-speed multi-channel operation using dedicated time-correlated single photon counting electronics. Our multi-channel single photon receiver offers exciting measurement capabilities for future quantum communication, remote sensing, and imaging applications.
Photon-number-resolving (PNR) detectors are a key enabling technology in photonic quantum information processing. Here, we demonstrate the PNR capacity of conventional superconducting nanowire single-photon detectors by performing ultra-high-resolution time-tagging of the detector-generated electrical pulses. This method provides a viable approach for PNR with high detection efficiency and a high operational repetition rate. We present the implementation of such a PNR detector in the telecom C-band and its characterization by measuring the photon-number statistics of coherent light with tunable intensity. Additionally, we demonstrate the capabilities of the detection method by measuring photon-number correlations of non-classical states.
Single-photon detectors are ubiquitous devices in quantum-photonic-based communication, computation, metrology, and sensing. In these applications, N -fold coincidence photon counting is often needed, for example, to characterize entanglement. However, N -fold coincidence photon counting typically requires N individual single-photon detectors and associated bias and readout electronics, and these resources could become prohibitive if N goes large and the detectors need to work at cryogenic temperatures. Here, to break this limit on N , we propose a device architecture based on N cascaded photosensitive superconducting nanowires and one wider nanowire that functions as a current reservoir. We show that by strategically designing the device, the network of these superconducting nanowires can work in a synergic manner as an n -photon detector, where n can be from 1 to N , depending on the bias conditions. We therefore name the devices of this type superconducting nanowire multi-photon detectors (SNMPDs). In addition to its simple one-port bias and readout circuitry, the coincidences are counted internally in the detector, eliminating the need for external multi-channel, time-correlated pulse counters. We believe that the SNMPDs proposed in this work could open avenues towards conveniently measuring high-order temporal correlations of light and characterizing multi-photon entanglement.