Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1803.09424 · Applied Physics Letters

Radio-over-fiber using an optical antenna based on Rydberg states of atoms

Amita B. Deb, Niels Kjærgaard

Published May 21, 2018• 98 citations
arXivHTMLPDF

Abstract

We provide an experimental demonstration of a direct fiber-optic link for RF transmission (“radio-over-fiber”) using a sensitive optical antenna based on a rubidium vapor cell. The scheme relies on measuring the transmission of laser light at an electromagnetically induced transparency resonance that involves highly excited Rydberg states. By dressing pairs of Rydberg states using microwave fields that act as local oscillators, we encoded RF signals in the optical frequency domain. The light carrying the information is linked via a virtually lossless optical fiber to a photodetector where the signal is retrieved. We demonstrate a signal bandwidth in excess of 1 MHz limited by the available coupling laser power and atomic optical density. Our sensitive, non-metallic and readily scalable optical antenna for microwaves allows extremely low-levels of optical power (∼1 μW) throughput in the fiber-optic link. It offers a promising future platform for emerging wireless network infrastructures.

DOI
10.1063/1.5031033

Related papers

Digital communication with Rydberg atoms and amplitude-modulated microwave fields

David H. Meyer, Kevin C. Cox, Fredrik K. Fatemi +1 more

Rydberg atoms, with one highly excited, nearly ionized electron, have extreme sensitivity to electric fields, including microwave fields ranging from 100 MHz to over 1 THz. Here, we show that room-temperature Rydberg atoms can be used as sensitive, high bandwidth, microwave communication antennas. We demonstrate near photon-shot-noise limited readout of data encoded in amplitude-modulated 17 GHz microwaves, using an electromagnetically induced-transparency (EIT) probing scheme. We measure a photon-shot-noise limited channel capacity of up to 8.2 Mbit s−1 and implement an 8-state phase-shift-keying digital communication protocol. The bandwidth of the EIT probing scheme is found to be limited by the available coupling laser power and the natural linewidth of the rubidium D2 transition. We discuss how atomic communication receivers offer several opportunities to surpass the capabilities of classical antennas.

arXiv:1803.03545•Applied Physics Letters•May 21, 2018•266 citations

Rydberg RF Receiver Operation to Track RF Signal Fading and Frequency Drift

Liam W. Bussey, Amelia Winterburn, Marco Menchetti +2 more

Significant progress has been made in recent years demonstrating an all-optical high sensitivity Radio Frequency (RF) sensor exploiting the Electromagnetically Induced Transparency (EIT) effect in an atomic vapor. Rydberg RF sensors have previously been shown to exhibit excellent lab-based performance in measuring electric field properties. As a commercial network operator we wish to exploit these capabilities to produce a rugged high-sensitivity receiver for 5G signals, so we seek simple planning rules applicable to readily available low cost components. We present a simple analytic model for the operation of a sensitive Rydberg RF receiver to predict the optical modulation in response to an RF signal. We focus on maximizing the contrast in the optical response to a modulated RF signal rather than to a constant RF field. We show that the optical modulation depth can be maximized using an optimum coupling intensity. The optical modulation depth drops off rapidly as the RF source is detuned away from resonance. By detuning the coupling frequency to compensate for the RF detuning we demonstrate that the useful RF bandwidth of the receiver can be significantly extended. We measure this variation in optical response using a Rubidium vapor at a 15 GHz RF carrier frequency. Using readily available optical components we obtain good agreement with our model. This convenient analytic approach will simplify the design and operation of Rydberg RF receivers as sensitive components in future 5G mobile communications, particularly for the power-limited uplink from mobile device to base-station.

Journal of Lightwave Technology•Jul 21, 2021•10 citations

Sensitivity improvement of Rydberg atom-based microwave sensing via electromagnetically induced transparency

M. H. Cai, Zi-Shan Xu, Shuhang You +1 more

A highly excited Rydberg atom via electromagnetically induced transparency with two color cascading lasers has extreme sensitivity to electric fields of microwave ranging from 100 MHz to over 1 THz. It can be used as susceptible atom-based microwave communication antennas where the carrier wave usually works exactly resonant to the transition between a pair of adjacent Rydberg states with large electric dipole moment. A technique of superheterodyne with a strong on-resonant local microwave oscillator is employed to induce considerable Autler-Townes splitting where the antennas has a highest dynamic response to another weak target signal microwave carrier. To further improve the sensitivity of atomic antenna in communication, we detune the carrier microwave frequency off resonance forming an asymmetrically optical splitting and fix the coupling laser frequency at the shoulder of the stronger one, and optimize the local field strength simultaneously. It gives a sensitivity of 12.50(04) $\rm{nVcm^{-1}\cdot Hz^{-1/2}}$. Its enhancement mechanism of sensitivity is also proved by a theoretical simulation.

arXiv:2111.06582•Nov 12, 2021•1 citation

Rydberg-atom-based digital communication using a continuously tunable radio-frequency carrier

Zhenfei Song, Hongping Liu, Xiaochi Liu +4 more

Up to now, the measurement of radio-frequency (RF) electric field achieved using the electromagnetically-induced transparency (EIT) of Rydberg atoms has proved to be of high-sensitivity and shows a potential to produce a promising atomic RF receiver at resonance between two chosen Rydberg states. In this paper, we study the extension of the feasibility of digital communication via this quantum-based antenna over a continuously tunable RF-carrier at off-resonance. Our experiment shows that the digital communication at a rate of 500 kbps can be performed reliably within a tunable bandwidth of 200 MHz near a 10.22 GHz carrier. Outside of this range, the bit error rate (BER) increases, rising to, for example, 15% at an RF-detuning of ±150 MHz. In the measurement, the time-varying RF field is retrieved by detecting the optical power of the probe laser at the center frequency of RF-induced symmetric or asymmetric Autler-Townes splitting in EIT. Prior to the digital test, we studied the RF-reception quality as a function of various parameters including the RF detuning and found that a choice of linear gain response to the RF-amplitude can suppress the signal distortion. The modulating signal can be decoded at speeds up to 500 kHz in the tunable bandwidth. Our test consolidates the physical basis for reliable communication and spectral sensing over a wider broadband RF-carrier, which paves a way for the concurrent multi-channel communications founded on the same pair of Rydberg states.

arXiv:1808.10839•Optics Express•Mar 12, 2019•175 citations

Probing bandwidth and sensitivity in Rydberg atom sensing via optical homodyne and rf heterodyne detection

Dixith Manchaiah, Stone Oliver, Samuel Berweger +2 more

Rydberg atom based sensors allow for SI traceable measurements and show promise for applications in the field of communication and radar technologies. In this article, we investigate the bandwidth and sensitivity of a Rydberg atom-based sensor in a rubidium vapor cell using Rydberg electromagnetically induced transparency (EIT) spectroscopy. We employ a radio-frequency (RF) heterodyne measurement technique in combination with an optical homodyne setup to extend the achievable range between sensitivity and bandwidth in a Rydberg sensor. While the bandwidth of Rydberg sensors are limited by the transit time of atoms and the Rabi frequency of the coupling field, achieving higher bandwidth through smaller beam sizes is thought to compromise sensitivity due to reduced EIT signal strength. Using optical homodyne detection, we demonstrate that sensitivity is preserved while achieving a response bandwidth of 8 MHz. In addition, using the Rydberg sensor, we receive digital communication signals and present error vector magnitude (EVM) measurements as a function of varying symbol rates and bandwidth of the Rydberg sensor. Furthermore, the sensor's performance is compared with a conventional RF mixer. We establish that the bandwidth of a Rydberg sensor when receiving a pure tone is not the same as the bandwidth of the sensor when receiving a modulated signal. This difference results from the spreading of symbols in the frequency domain, leading to a reduction of the signal to noise ratio (SNR) and an accumulation of noise over the total span of the modulated signal.

arXiv:2509.20632•Physical Review A•Dec 22, 2025•5 citations

Frequency- and Power-Dependent Optical Response of a Cesium Rydberg Microwave Receiver

Jure Pirman, Ema Stopar, Katja Gosar +2 more

We show experimentally obtained frequency- and power-dependent optical response of a room-temperature cesium vapor cell used as a Rydberg microwave receiver based on electromagnetically induced transparency. An applied microwave field couples the ${70S_{1/2}}$ Rydberg state to the nearby ${70P_{1/2}}$, ${70P_{3/2}}$, ${69P_{1/2}}$, and ${69P_{3/2}}$ states, modifying the probe-transmission spectrum. Probe transmission is recorded over a 800 MHz range of coupling laser detunings. These EIT spectra are measured for RF frequencies from 9 to 13.5 GHz and over a 40 dB range of RF power. We analyze the RF induced splittings in the recorded EIT spectra. We observe both limiting cases, where the EIT peak separation is either dominated by the RF detuning or by the RF power. At higher powers we are also able to observe complex features due to coupling of multiple nearby Rydberg states. We further analyze the probe-transmission signal at zero coupling-laser detuning. Sigmoidal fits to the power-response curves are used to determine the midpoint power and the 10-90% transition interval as functions of RF frequency.

quant-pharXiv:2609.31241•Sep 28, 2026•0 citations
We provide an experimental demonstration of a direct fiber-optic link for RF transmission (“radio-over-fiber”) using a sensitive optical antenna based on a rubidium vapor cell. The scheme relies on measuring the transmission of laser light at an electromagnetically induced transparency resonance that involves highly excited Rydberg states. By dressing pairs of Rydberg states using microwave fields that act as local oscillators, we encoded RF signals in the optical frequency domain. The light carrying the information is linked via a virtually lossless optical fiber to a photodetector where the signal is retrieved. We demonstrate a signal bandwidth in excess of 1 MHz limited by the available coupling laser power and atomic optical density. Our sensitive, non-metallic and readily scalable optical antenna for microwaves allows extremely low-levels of optical power (∼1 μW) throughput in the fiber-optic link. It offers a promising future platform for emerging wireless network infrastructures.
Rydberg atoms, with one highly excited, nearly ionized electron, have extreme sensitivity to electric fields, including microwave fields ranging from 100 MHz to over 1 THz. Here, we show that room-temperature Rydberg atoms can be used as sensitive, high bandwidth, microwave communication antennas. We demonstrate near photon-shot-noise limited readout of data encoded in amplitude-modulated 17 GHz microwaves, using an electromagnetically induced-transparency (EIT) probing scheme. We measure a photon-shot-noise limited channel capacity of up to 8.2 Mbit s−1 and implement an 8-state phase-shift-keying digital communication protocol. The bandwidth of the EIT probing scheme is found to be limited by the available coupling laser power and the natural linewidth of the rubidium D2 transition. We discuss how atomic communication receivers offer several opportunities to surpass the capabilities of classical antennas.
Significant progress has been made in recent years demonstrating an all-optical high sensitivity Radio Frequency (RF) sensor exploiting the Electromagnetically Induced Transparency (EIT) effect in an atomic vapor. Rydberg RF sensors have previously been shown to exhibit excellent lab-based performance in measuring electric field properties. As a commercial network operator we wish to exploit these capabilities to produce a rugged high-sensitivity receiver for 5G signals, so we seek simple planning rules applicable to readily available low cost components. We present a simple analytic model for the operation of a sensitive Rydberg RF receiver to predict the optical modulation in response to an RF signal. We focus on maximizing the contrast in the optical response to a modulated RF signal rather than to a constant RF field. We show that the optical modulation depth can be maximized using an optimum coupling intensity. The optical modulation depth drops off rapidly as the RF source is detuned away from resonance. By detuning the coupling frequency to compensate for the RF detuning we demonstrate that the useful RF bandwidth of the receiver can be significantly extended. We measure this variation in optical response using a Rubidium vapor at a 15 GHz RF carrier frequency. Using readily available optical components we obtain good agreement with our model. This convenient analytic approach will simplify the design and operation of Rydberg RF receivers as sensitive components in future 5G mobile communications, particularly for the power-limited uplink from mobile device to base-station.
A highly excited Rydberg atom via electromagnetically induced transparency with two color cascading lasers has extreme sensitivity to electric fields of microwave ranging from 100 MHz to over 1 THz. It can be used as susceptible atom-based microwave communication antennas where the carrier wave usually works exactly resonant to the transition between a pair of adjacent Rydberg states with large electric dipole moment. A technique of superheterodyne with a strong on-resonant local microwave oscillator is employed to induce considerable Autler-Townes splitting where the antennas has a highest dynamic response to another weak target signal microwave carrier. To further improve the sensitivity of atomic antenna in communication, we detune the carrier microwave frequency off resonance forming an asymmetrically optical splitting and fix the coupling laser frequency at the shoulder of the stronger one, and optimize the local field strength simultaneously. It gives a sensitivity of 12.50(04) nVcm−1⋅Hz−1/2\rm{nVcm^{-1}\cdot Hz^{-1/2}}nVcm−1⋅Hz−1/2. Its enhancement mechanism of sensitivity is also proved by a theoretical simulation.
Up to now, the measurement of radio-frequency (RF) electric field achieved using the electromagnetically-induced transparency (EIT) of Rydberg atoms has proved to be of high-sensitivity and shows a potential to produce a promising atomic RF receiver at resonance between two chosen Rydberg states. In this paper, we study the extension of the feasibility of digital communication via this quantum-based antenna over a continuously tunable RF-carrier at off-resonance. Our experiment shows that the digital communication at a rate of 500 kbps can be performed reliably within a tunable bandwidth of 200 MHz near a 10.22 GHz carrier. Outside of this range, the bit error rate (BER) increases, rising to, for example, 15% at an RF-detuning of ±150 MHz. In the measurement, the time-varying RF field is retrieved by detecting the optical power of the probe laser at the center frequency of RF-induced symmetric or asymmetric Autler-Townes splitting in EIT. Prior to the digital test, we studied the RF-reception quality as a function of various parameters including the RF detuning and found that a choice of linear gain response to the RF-amplitude can suppress the signal distortion. The modulating signal can be decoded at speeds up to 500 kHz in the tunable bandwidth. Our test consolidates the physical basis for reliable communication and spectral sensing over a wider broadband RF-carrier, which paves a way for the concurrent multi-channel communications founded on the same pair of Rydberg states.
Rydberg atom based sensors allow for SI traceable measurements and show promise for applications in the field of communication and radar technologies. In this article, we investigate the bandwidth and sensitivity of a Rydberg atom-based sensor in a rubidium vapor cell using Rydberg electromagnetically induced transparency (EIT) spectroscopy. We employ a radio-frequency (RF) heterodyne measurement technique in combination with an optical homodyne setup to extend the achievable range between sensitivity and bandwidth in a Rydberg sensor. While the bandwidth of Rydberg sensors are limited by the transit time of atoms and the Rabi frequency of the coupling field, achieving higher bandwidth through smaller beam sizes is thought to compromise sensitivity due to reduced EIT signal strength. Using optical homodyne detection, we demonstrate that sensitivity is preserved while achieving a response bandwidth of 8 MHz. In addition, using the Rydberg sensor, we receive digital communication signals and present error vector magnitude (EVM) measurements as a function of varying symbol rates and bandwidth of the Rydberg sensor. Furthermore, the sensor's performance is compared with a conventional RF mixer. We establish that the bandwidth of a Rydberg sensor when receiving a pure tone is not the same as the bandwidth of the sensor when receiving a modulated signal. This difference results from the spreading of symbols in the frequency domain, leading to a reduction of the signal to noise ratio (SNR) and an accumulation of noise over the total span of the modulated signal.
We show experimentally obtained frequency- and power-dependent optical response of a room-temperature cesium vapor cell used as a Rydberg microwave receiver based on electromagnetically induced transparency. An applied microwave field couples the 70S1/2{70S_{1/2}}70S1/2​ Rydberg state to the nearby 70P1/2{70P_{1/2}}70P1/2​, 70P3/2{70P_{3/2}}70P3/2​, 69P1/2{69P_{1/2}}69P1/2​, and 69P3/2{69P_{3/2}}69P3/2​ states, modifying the probe-transmission spectrum. Probe transmission is recorded over a 800 MHz range of coupling laser detunings. These EIT spectra are measured for RF frequencies from 9 to 13.5 GHz and over a 40 dB range of RF power. We analyze the RF induced splittings in the recorded EIT spectra. We observe both limiting cases, where the EIT peak separation is either dominated by the RF detuning or by the RF power. At higher powers we are also able to observe complex features due to coupling of multiple nearby Rydberg states. We further analyze the probe-transmission signal at zero coupling-laser detuning. Sigmoidal fits to the power-response curves are used to determine the midpoint power and the 10-90% transition interval as functions of RF frequency.