Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1712.04011 · Journal of Modern Optics

Precise positioning of an ion in an integrated Paul trap-cavity system using radiofrequency signals

Ezra Kassa, Hiroki Takahashi, Costas Christoforou, Matthias Keller

Published Dec 6, 2017• 10 citations
arXivHTMLPDF

Abstract

We report a novel miniature Paul ion trap design with an integrated optical fibre cavity which can serve as a building block for a fibre-linked quantum network. In such cavity quantum electrodynamic set-ups, the optimal coupling of the ions to the cavity mode is of vital importance and this is achieved by moving the ion relative to the cavity mode. The trap presented herein features an endcap-style design complemented with extra electrodes on which additional radiofrequency voltages are applied to fully control the pseudopotential minimum in three dimensions. This method lifts the need to use three-dimensional translation stages for moving the fibre cavity with respect to the ion and achieves high integrability, mechanical rigidity and scalability. Not based on modifying the capacitive load of the trap, this method leads to precise control of the pseudopotential minimum allowing the ion to be moved with precisions limited only by the ion’s position spread. We demonstrate this by coupling the ion to the fibre cavity and probing the cavity mode profile.

DOI
10.1080/09500340.2017.1406158

Related papers

Towards an integrated ion trap - cavity system with strong coupling for multiple ions

Jack Morphew

Precise control over internal states of atomic ions in ion traps has been possible for many years enabling high precision spectroscopy of atomic transitions. Trapped ions are suitable candidates for quantum information processing due to their long storage times, low decoherence rates and high readout efficiency. Recent advances in micro-machining fibre optic mirrors and integrated fibre optic-ion trap systems for cavity QED allows one to realise strong coupling between an ion and a cavity mode by reducing the mode volume. For strong ion-cavity coupling, deterministic transfer of quantum states between ions and photons is possible. We have designed and constructed a miniaturised linear Paul trap with an integrated optical cavity, intended for coupling multiple ions to the cavity mode. The RF-electrode separation is 50μm, while the endcap separation is 350μm. The endcap electrodes are narrow tubes of inner diameter 300μm allowing optical fibers through the tubes to form the cavity. The trap depth we calculate to be 650meV for a 10V applied potential at 20MHz. The 4P1⁄2→ 3D3⁄2 transition of the atomic ion 40Ca+ with Γ = 24π × 22MHz can be coupled to an optical fibre Fabry-Perot cavity with length of 380µm, finesse of 33,000 and cavity linewidth k = 2π ×11MHz.The ion-cavity coherent coupling g = 2π × 19:5MHz of this system will put it in single-ion strong coupling regime with cooperativity, C=1.5.

•Sep 1, 2016•0 citations

Cavity-QED implementations for distributive quantum computation

Hamzah Shokeir

The coupling of a single ion to an optical cavity is a promising route towards scalable quantum technologies. This study presents the design, initial construction and simulations of two different ion traps for quantum computation with novel capabilities. The first system is an end cap system that utilises Fabry Perot cavities formed by the facets of fibres. The small mode volumes (cavity length ~ 300 µm) of the fibre cavities are ideal to achieve high cooperativity and coupling strength. This trap features the novel ability to mechanically adjust the position of the ion by perturbing/distorting the trapping potential with grounded side electrodes. A capability crucial to maximising the ion-cavity coupling. The design incorporates a number of improvements over the previous iteration by Takahashi et al. such as increased optical access, increased mode matching and improved mechanical stability of the cavity. To verify and test the design modifications; Pound-Drever-Hall cavity locking was set up. The test set up failed to lock to an error signal due to a mechanically unstable translation stage. The other design presented is a linear micro trap intended to trap strings of ions and does not use fibre based cavities. This design features multiple different regions reserved for storage, computation and communication and aims to implement a shuttling scheme that will allow the selective loading of single ions from a reservoir of ions into the desired regions. The fabrication process would utilise methods in microfabrication. Simulations of the trapping dynamics were used to optimise the electrode geometries and splitting protocol.

•Dec 9, 2020•0 citations

Fibre-tip microcavities for enhanced ion-photon coupling in scalable quantum information networks

Péter Horák, Nina Podoliak, Hiroki Takahashi +1 more

Scalable quantum information processing requires efficient coupling between stationary qubits (trapped atoms, ions, NV centres, etc.) via “flying” single-photon qubits. Here we investigate the optimisation and integration of fibre-tip microcavities into radiofrequency ion traps to achieve (i) high-fidelity transfer of ion qubits onto single photons, (ii) low-loss coupling of cavity photons into single-mode optical fibre, and (iii) achieving conditions (i) and (ii) without disturbing the ion trap. Our cavities are fabricated by laser micro-machining the ends of optical fibres and subsequent coating with a thin dielectric mirror, giving rise to cavity mirrors with a Gaussian profile. These cavities allow for small mode volume and thus large ion-photon coupling fulfilling requirement (i), while simultaneously providing intrinsic coupling to optical fibres, requirement (ii), as long as mode matching between the cavity mode and the fibre mode can be achieved at the cavity mirror. Using a semi-analytical numerical method, we show that Gaussian-shaped mirrors can in fact be used to enhance ion-photon coupling beyond what is possible with more common spherical cavity mirrors. Ion traps are notoriously sensitive to the presence of dielectric materials such as cavity mirrors near the trap centre, preventing requirement (iii) from being achieved. We performed an extensive numerical study of five different common ion traps to find the optimum configurations for integrating fibre-tip cavities with minimised effects on the trapping potentials. We discuss these results and present simple and effective design rules for realising optimum ion-cavity based quantum networks.

•Sep 20, 2016•0 citations

Ion-trap cavity QED system for probabilistic entanglement

Nicolas Seymour-Smith

Laser systems and a linear radiofrequency (rf) Paul trap with an integrated co-axial cavity have been developed for experiments in cavity QED and probabilistic entanglement. Single 40Ca+ ions and large Coulomb crystals have been trapped routinely and laser cooled with long trapping lifetimes. A technique to achieve precise overlap of the pseudopotential minimum of the rf-field with the cavity mode has been implemented through variable capacitors in the resonant rf-circuit used to drive the trap. Three-dimensional micromotion compensation has been implemented. An 894 nm laser has been frequency stabilised to a Pound-Drever-Hall cavity which is in turn stabilised to atomic Cs using polarisation spectroscopy. The Allan variance of the error signal has been reduced to less than a kilohertz on timescales greater than a second. A novel implementation of the scanning cavity transfer lock has been developed to transfer the stability of the 894 nm laser to the 397 nm ion cooling and 866 nm repumping lasers. The bandwidth of the system has been increased to 380 Hz and the Allan variance of the error signal has been reduced to less than ten kilohertz on timescales of greater than a second. The pseudopotential minimum of the rf field has been overlapped optimally with the optical cavity mode through mapping of the fluorescence from cavity-field repumped ions as a function of their displacement. Coupling to the cavity mode has been confirmed by observation of resonant fluorescence into the cavity mode using the cavity-assisted Raman transition process. The thesis demonstrates that the setup is ready for the controlled production of single photons with pre-determined polarisation states, and progression onto new schemes to entangle multiple ions that are coupled to the optical cavity mode.

•May 21, 2012•1 citation

Positioning of the rf potential minimum line of a linear Paul trap with micrometer precision

Peter F. Herskind, Aurélien Dantan, Magnus Albert +2 more

We demonstrate a general technique to achieve a precise radial displacement of the nodal line of the radiofrequency (rf) field in a linear Paul trap. The technique relies on selective adjustment of the load capacitance of the trap electrodes, achieved through the addition of capacitors to the basic resonant rf-circuit used to drive the trap. Displacements of up to 100 micrometer with micrometer precision are measured using a combination of fluorescence images of ion Coulomb crystals and coherent coupling of such crystals to a mode of an optical cavity. The displacements are made without measurable distortion of the shape or structure of the Coulomb crystals, as well as without introducing excess heating commonly associated with the radial displacement of crystals by adjustment through static potentials. We expect this technique to be of importance for future developments of microtrap architectures and ion-based cavity QED.

arXiv:0905.3147•Journal of Physics B Atomic Molecular and Optical Physics•Jul 15, 2009•39 citations

Strong coupling of a single ion to an optical fibre cavity

Costas Christoforou

Achieving strong coupling between a single ion and a cavity is an important condition for cavity quantum electrodynamics, mainly for its applications in quantum networks, quantum computing and quantum interfaces. While strong coupling has been achieved in various physical systems, so far it remained elusive for single atomic ions. In this thesis I present the first observation of strong coupling between a single ion and an optical cavity. Our system is a hybrid system where a fibre based Fabry-Pérot cavity was incorporated to a 3D Paul trap. The position of the ion, relative to the cavity mode, was adjusted by applying additional rf signals on the radial electrodes of the trap, in order to maximise the coupling between the ion and the cavity. The coupling strength was measured to be g = 2p × (12.3±0.1) MHz, which exceeds both the atomic decay rate, ? = 2p × 11.5 MHz, and the cavity decay rate, ? = 2p × (4.1 ± 0.1) MHz, placing the ion-cavity coupling in the strong coupling regime. Cavity assisted Raman spectroscopy was used to precisely characterize the ion-cavity coupling strength, and observe a spectrum featuring the normal mode splitting in the cavity transmission due to the ion-cavity interaction. Due to geometric constraints in our trap, Doppler cooling was not optimal along the cavity axis, hindering the localisation of the ion and thus its coupling to the cavity. To improve the localisation of the ion, cavity cooling was used to efficiently cool the ion along the cavity axis. By using cavity cooling, we obtain an enhanced ion-cavity coupling of g0 = 2p × (16.7±0.1) MHz, compared with g0 = 2p × (15.2±0.1) MHz when using only Doppler cooling.

•Mar 22, 2021•0 citations
We report a novel miniature Paul ion trap design with an integrated optical fibre cavity which can serve as a building block for a fibre-linked quantum network. In such cavity quantum electrodynamic set-ups, the optimal coupling of the ions to the cavity mode is of vital importance and this is achieved by moving the ion relative to the cavity mode. The trap presented herein features an endcap-style design complemented with extra electrodes on which additional radiofrequency voltages are applied to fully control the pseudopotential minimum in three dimensions. This method lifts the need to use three-dimensional translation stages for moving the fibre cavity with respect to the ion and achieves high integrability, mechanical rigidity and scalability. Not based on modifying the capacitive load of the trap, this method leads to precise control of the pseudopotential minimum allowing the ion to be moved with precisions limited only by the ion’s position spread. We demonstrate this by coupling the ion to the fibre cavity and probing the cavity mode profile.
Precise control over internal states of atomic ions in ion traps has been possible for many years enabling high precision spectroscopy of atomic transitions. Trapped ions are suitable candidates for quantum information processing due to their long storage times, low decoherence rates and high readout efficiency. Recent advances in micro-machining fibre optic mirrors and integrated fibre optic-ion trap systems for cavity QED allows one to realise strong coupling between an ion and a cavity mode by reducing the mode volume. For strong ion-cavity coupling, deterministic transfer of quantum states between ions and photons is possible. We have designed and constructed a miniaturised linear Paul trap with an integrated optical cavity, intended for coupling multiple ions to the cavity mode. The RF-electrode separation is 50μm, while the endcap separation is 350μm. The endcap electrodes are narrow tubes of inner diameter 300μm allowing optical fibers through the tubes to form the cavity. The trap depth we calculate to be 650meV for a 10V applied potential at 20MHz. The 4P1⁄2→ 3D3⁄2 transition of the atomic ion 40Ca+ with Γ = 24π × 22MHz can be coupled to an optical fibre Fabry-Perot cavity with length of 380µm, finesse of 33,000 and cavity linewidth k = 2π ×11MHz.The ion-cavity coherent coupling g = 2π × 19:5MHz of this system will put it in single-ion strong coupling regime with cooperativity, C=1.5.
The coupling of a single ion to an optical cavity is a promising route towards scalable quantum technologies. This study presents the design, initial construction and simulations of two different ion traps for quantum computation with novel capabilities. The first system is an end cap system that utilises Fabry Perot cavities formed by the facets of fibres. The small mode volumes (cavity length ~ 300 µm) of the fibre cavities are ideal to achieve high cooperativity and coupling strength. This trap features the novel ability to mechanically adjust the position of the ion by perturbing/distorting the trapping potential with grounded side electrodes. A capability crucial to maximising the ion-cavity coupling. The design incorporates a number of improvements over the previous iteration by Takahashi et al. such as increased optical access, increased mode matching and improved mechanical stability of the cavity. To verify and test the design modifications; Pound-Drever-Hall cavity locking was set up. The test set up failed to lock to an error signal due to a mechanically unstable translation stage. The other design presented is a linear micro trap intended to trap strings of ions and does not use fibre based cavities. This design features multiple different regions reserved for storage, computation and communication and aims to implement a shuttling scheme that will allow the selective loading of single ions from a reservoir of ions into the desired regions. The fabrication process would utilise methods in microfabrication. Simulations of the trapping dynamics were used to optimise the electrode geometries and splitting protocol.
Scalable quantum information processing requires efficient coupling between stationary qubits (trapped atoms, ions, NV centres, etc.) via “flying” single-photon qubits. Here we investigate the optimisation and integration of fibre-tip microcavities into radiofrequency ion traps to achieve (i) high-fidelity transfer of ion qubits onto single photons, (ii) low-loss coupling of cavity photons into single-mode optical fibre, and (iii) achieving conditions (i) and (ii) without disturbing the ion trap. Our cavities are fabricated by laser micro-machining the ends of optical fibres and subsequent coating with a thin dielectric mirror, giving rise to cavity mirrors with a Gaussian profile. These cavities allow for small mode volume and thus large ion-photon coupling fulfilling requirement (i), while simultaneously providing intrinsic coupling to optical fibres, requirement (ii), as long as mode matching between the cavity mode and the fibre mode can be achieved at the cavity mirror. Using a semi-analytical numerical method, we show that Gaussian-shaped mirrors can in fact be used to enhance ion-photon coupling beyond what is possible with more common spherical cavity mirrors. Ion traps are notoriously sensitive to the presence of dielectric materials such as cavity mirrors near the trap centre, preventing requirement (iii) from being achieved. We performed an extensive numerical study of five different common ion traps to find the optimum configurations for integrating fibre-tip cavities with minimised effects on the trapping potentials. We discuss these results and present simple and effective design rules for realising optimum ion-cavity based quantum networks.
Laser systems and a linear radiofrequency (rf) Paul trap with an integrated co-axial cavity have been developed for experiments in cavity QED and probabilistic entanglement. Single 40Ca+ ions and large Coulomb crystals have been trapped routinely and laser cooled with long trapping lifetimes. A technique to achieve precise overlap of the pseudopotential minimum of the rf-field with the cavity mode has been implemented through variable capacitors in the resonant rf-circuit used to drive the trap. Three-dimensional micromotion compensation has been implemented. An 894 nm laser has been frequency stabilised to a Pound-Drever-Hall cavity which is in turn stabilised to atomic Cs using polarisation spectroscopy. The Allan variance of the error signal has been reduced to less than a kilohertz on timescales greater than a second. A novel implementation of the scanning cavity transfer lock has been developed to transfer the stability of the 894 nm laser to the 397 nm ion cooling and 866 nm repumping lasers. The bandwidth of the system has been increased to 380 Hz and the Allan variance of the error signal has been reduced to less than ten kilohertz on timescales of greater than a second. The pseudopotential minimum of the rf field has been overlapped optimally with the optical cavity mode through mapping of the fluorescence from cavity-field repumped ions as a function of their displacement. Coupling to the cavity mode has been confirmed by observation of resonant fluorescence into the cavity mode using the cavity-assisted Raman transition process. The thesis demonstrates that the setup is ready for the controlled production of single photons with pre-determined polarisation states, and progression onto new schemes to entangle multiple ions that are coupled to the optical cavity mode.
We demonstrate a general technique to achieve a precise radial displacement of the nodal line of the radiofrequency (rf) field in a linear Paul trap. The technique relies on selective adjustment of the load capacitance of the trap electrodes, achieved through the addition of capacitors to the basic resonant rf-circuit used to drive the trap. Displacements of up to 100 micrometer with micrometer precision are measured using a combination of fluorescence images of ion Coulomb crystals and coherent coupling of such crystals to a mode of an optical cavity. The displacements are made without measurable distortion of the shape or structure of the Coulomb crystals, as well as without introducing excess heating commonly associated with the radial displacement of crystals by adjustment through static potentials. We expect this technique to be of importance for future developments of microtrap architectures and ion-based cavity QED.
Achieving strong coupling between a single ion and a cavity is an important condition for cavity quantum electrodynamics, mainly for its applications in quantum networks, quantum computing and quantum interfaces. While strong coupling has been achieved in various physical systems, so far it remained elusive for single atomic ions. In this thesis I present the first observation of strong coupling between a single ion and an optical cavity. Our system is a hybrid system where a fibre based Fabry-Pérot cavity was incorporated to a 3D Paul trap. The position of the ion, relative to the cavity mode, was adjusted by applying additional rf signals on the radial electrodes of the trap, in order to maximise the coupling between the ion and the cavity. The coupling strength was measured to be g = 2p × (12.3±0.1) MHz, which exceeds both the atomic decay rate, ? = 2p × 11.5 MHz, and the cavity decay rate, ? = 2p × (4.1 ± 0.1) MHz, placing the ion-cavity coupling in the strong coupling regime. Cavity assisted Raman spectroscopy was used to precisely characterize the ion-cavity coupling strength, and observe a spectrum featuring the normal mode splitting in the cavity transmission due to the ion-cavity interaction. Due to geometric constraints in our trap, Doppler cooling was not optimal along the cavity axis, hindering the localisation of the ion and thus its coupling to the cavity. To improve the localisation of the ion, cavity cooling was used to efficiently cool the ion along the cavity axis. By using cavity cooling, we obtain an enhanced ion-cavity coupling of g0 = 2p × (16.7±0.1) MHz, compared with g0 = 2p × (15.2±0.1) MHz when using only Doppler cooling.