Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1712.03218 · Physical Review Letters

Realizing a Circuit Analog of an Optomechanical System with Longitudinally Coupled Superconducting Resonators

Christopher Eichler, J. R. Petta

Published May 30, 2018• 52 citations
arXivHTMLPDF

Abstract

We realize a superconducting circuit analog of the generic cavity-optomechanical Hamiltonian by longitudinally coupling two superconducting resonators, which are an order of magnitude different in frequency. We achieve longitudinal coupling by embedding a superconducting quantum interference device into a high frequency resonator, making its resonance frequency depend on the zero point current fluctuations of a nearby low frequency LC resonator. By applying sideband drive fields we enhance the intrinsic coupling strength of about 15 kHz up to 280 kHz by controlling the amplitude of the drive field. Our results pave the way towards the exploration of optomechanical effects in a fully superconducting platform and could enable quantum optics experiments with photons in the yet unexplored radio frequency band.

DOI
10.1103/physrevlett.120.227702

Related papers

THE REGENERATION EFFECT OF QUANTUM OPTICAL EFFECTS IN ANALOG SUPERCONDUCTING SYSTEMS

Nisha, Vipin Kumar

By longitudinal combination of two superconducting resonators, we realise a superconducting circulus analogue to the generic Hamilton cavity-optomechanical, which are of a different order of dimension. Longitudinal connections are achieved by incorporating a superconducting quantum interference into a high frequency resonator, so that the frequency of its resonance depends upon the zero-point current fluctuations of the nearby low frequency LC resonator. By using sideband drive fields the intrinsic coupling power is increased by controlling the amplitude of the drive field by around 15 kHz to 280 kHz. Our findings pave the way for the examination in a completely superconducting platform of optomechanical effects and allow quantum optical experiments with radiofrequencybands in which photons are unexplored. We consider a design for a cyclic microrefrigerator using a superconducting flux qubit. Adiabatic flux modulation and thermalisation can be used to transfer energy from the standard thin film resistance of the lower temperature to another at a higher temperature. Include the hot resistor as part of the highfrequency LC resonator and the cold as part of the low frequency oscilator while keeping both circuits under the damped mode, which enhance Photonic heat conduction's frequency selection. In an experimentally practical context we talk about the output of the computer. The complementarity of information and Thermodynamic Entropy is shown by this system as quantic bit erasure directly relates to resistance cooling.

JournalNX - A Multidisciplinary Peer Reviewed Journal•Oct 31, 2019•0 citations

Circuit analog of quadratic optomechanics

Eunjong Kim, J. R. Johansson, Franco Nori

We propose a superconducting electrical circuit that simulates a quadratic optomechanical system. A capacitor placed between two transmission-line (TL) resonators acts like a semitransparent membrane, and a superconducting quantum interference device (SQUID) that terminates a TL resonator behaves like a movable mirror. Combining these circuit elements, it is possible to simulate a quadratic optomechanical coupling whose coupling strength is determined by the coupling capacitance and the tunable bias flux through the SQUIDs. Estimates using realistic parameters suggest that an improvement in the coupling strength could be realized, to five orders of magnitude from what has been observed in membrane-in-the-middle cavity optomechanical systems. This leads to the possibility of achieving the strong-coupling regime of quadratic optomechanics.

arXiv:1412.6869•Physical Review A•Mar 30, 2015•62 citations

Coupling Harmonic Oscillators to Superconducting Quantum Interference Cavities

Ines Corveira Rodrigues

This thesis explores the coupling of microwave cavities containing a Superconducting QUantum Interference Device (SQUID) to a mechanical resonator by means of a flux-mediated optomechanical coupling scheme, and to a Radio-Frequency (RF) circuit via a photon-pressure interaction. While flux-mediated optomechanical systems open the door for the exploration of optomechanical single-photon effects, ultimately allowing for the generation of non-classical states in mechanical oscillators and for the creation of optomechanical qubits, the realization of photon-pressure systems brings rich possibilities for quantum-limited sensing and quantum signal processing, representing a first step towards radio-frequency quantum photonics. Besides presenting the experimental work done with the systems described above, this thesis also provides a theoretical description of their working principle, details on their fabrication, and insights on maximizing their single-photon coupling strengths as well as an overview of the experimental challenges associated with SQUID cavities.

•May 6, 2021•0 citations

Optomechanical-like coupling between superconducting resonators

J. R. Johansson, Göran Johansson, Franco Nori

We propose and analyze a circuit that implements a nonlinear coupling between two superconducting microwave resonators. The resonators are coupled through a superconducting quantum interference device that terminates one of the resonators. This produces a nonlinear interaction of the standard optomechanical form, where the quadrature of one resonator couples to the photon number of the other resonator. The circuit therefore allows for all-electrical realizations of analogs to optomechanical systems, with coupling that can be both strong and tunable. We estimate the coupling strengths that should be attainable with the proposed device, and we find that the device is a promising candidate for realizing the single-photon strong-coupling regime. As a potential application, we discuss implementations of networks of nonlinearly coupled microwave resonators, which could be used in microwave-photon-based quantum simulation.

arXiv:1403.4341•Physical Review A•Nov 18, 2014•81 citations

Tunable and weakly invasive probing of a superconducting resonator based on electromagnetically induced transparency

Byoung-moo Ann, Gary Alexander Steele

Superconducting cavities with high quality factors play an essential role in circuit quantum electrodynamics and quantum computing. In measurements of the intrinsic loss rates of high frequency modes, it can be challenging to design an appropriate coupling to the measurement circuit in such a way that the resulting signal is sufficiently strong but also that this coupling does not lead to an unwanted loading circuit, obscuring the intrinsic internal loss rates. Here, we propose and demonstrate a spectroscopic probe of high-Q resonators based on the phenomena of electromagnetically induced transparency (EIT) between the resonator and qubit in the weak dispersive coupling regime. Applying a sideband drive signal to the qubit, we observe an interference dip originated from EIT in the qubit spectroscopy, originating from the quantum interference between the qubit probe signal and sideband transition. From the width and the depth of the dip, we are able to extract the single-photon linewidth of the resonator from an analytical model. Working in a previously unexplored regime in which the qubit has a larger linewidth than the resonator reduces the technical challenge of making a high-coherence qubit and is advantageous for remaining in the weakly invasive limit of coupling to the resonator. Furthermore, the sideband and the dispersive coupling between the resonator and the qubit can be tuned $in\phantom{\rule{3.33333pt}{0ex}}situ$ controlling the strength of the sideband drive power. This in situ tuneability allows the technique to be applied for efficient measurement of the resonator loss rate for any quality factor below a fixed upper bound, on the order of ${10}^{8}$ for our device, allowing a wide range of quality factors to be probed using a single design.

arXiv:2005.01975•Physical Review A•Nov 24, 2020•12 citations

Fundamentals and Applications of Hybrid Electro- and Opto-mechanical system coupled to Superconducting Qubit: A Short Review

Roson Nongthombam, Urmimala Dewan, Amarendra K. Sarma

Superconducting qubits, realized by incorporating Josephson junctions into superconducting circuits, behave as artificial atoms with anharmonic energy spectra and can be precisely controlled and measured using microwave cavities within the framework of circuit quantum electrodynamics (cQED). Since its emergence in the early 2000s, cQED has established superconducting qubits as leading candidates for scalable quantum devices and has enabled the exploration of hybrid quantum systems that integrate disparate physical platformsThis review surveys superconducting hybrid quantum electromechanical systems in which mechanical resonators are coupled to superconducting qubits, with a focus on two widely used qubit platforms: the transmon and the fluxonium. We provide an overview of the underlying coupling mechanisms arising from interactions through the phase and charge degrees of freedom of the qubit, and discuss how these mechanisms give rise to both longitudinal and transverse qubit-mechanical interactions. We further review extensions of electromechanical platforms to electro-optomechanical architectures, in which optical cavities are integrated to enable coherent interfacing between superconducting circuits and optical photons. This review aims to present a unified framework and perspective on qubit-mechanical and qubit-mechanical-optical hybrid systems in superconducting quantum technologies and applications related to sensors.

quant-pharXiv:2604.18186•Discover Quantum Science•Apr 21, 2026•1 citation
We realize a superconducting circuit analog of the generic cavity-optomechanical Hamiltonian by longitudinally coupling two superconducting resonators, which are an order of magnitude different in frequency. We achieve longitudinal coupling by embedding a superconducting quantum interference device into a high frequency resonator, making its resonance frequency depend on the zero point current fluctuations of a nearby low frequency LC resonator. By applying sideband drive fields we enhance the intrinsic coupling strength of about 15 kHz up to 280 kHz by controlling the amplitude of the drive field. Our results pave the way towards the exploration of optomechanical effects in a fully superconducting platform and could enable quantum optics experiments with photons in the yet unexplored radio frequency band.
By longitudinal combination of two superconducting resonators, we realise a superconducting circulus analogue to the generic Hamilton cavity-optomechanical, which are of a different order of dimension. Longitudinal connections are achieved by incorporating a superconducting quantum interference into a high frequency resonator, so that the frequency of its resonance depends upon the zero-point current fluctuations of the nearby low frequency LC resonator. By using sideband drive fields the intrinsic coupling power is increased by controlling the amplitude of the drive field by around 15 kHz to 280 kHz. Our findings pave the way for the examination in a completely superconducting platform of optomechanical effects and allow quantum optical experiments with radiofrequencybands in which photons are unexplored. We consider a design for a cyclic microrefrigerator using a superconducting flux qubit. Adiabatic flux modulation and thermalisation can be used to transfer energy from the standard thin film resistance of the lower temperature to another at a higher temperature. Include the hot resistor as part of the highfrequency LC resonator and the cold as part of the low frequency oscilator while keeping both circuits under the damped mode, which enhance Photonic heat conduction's frequency selection. In an experimentally practical context we talk about the output of the computer. The complementarity of information and Thermodynamic Entropy is shown by this system as quantic bit erasure directly relates to resistance cooling.
We propose a superconducting electrical circuit that simulates a quadratic optomechanical system. A capacitor placed between two transmission-line (TL) resonators acts like a semitransparent membrane, and a superconducting quantum interference device (SQUID) that terminates a TL resonator behaves like a movable mirror. Combining these circuit elements, it is possible to simulate a quadratic optomechanical coupling whose coupling strength is determined by the coupling capacitance and the tunable bias flux through the SQUIDs. Estimates using realistic parameters suggest that an improvement in the coupling strength could be realized, to five orders of magnitude from what has been observed in membrane-in-the-middle cavity optomechanical systems. This leads to the possibility of achieving the strong-coupling regime of quadratic optomechanics.
This thesis explores the coupling of microwave cavities containing a Superconducting QUantum Interference Device (SQUID) to a mechanical resonator by means of a flux-mediated optomechanical coupling scheme, and to a Radio-Frequency (RF) circuit via a photon-pressure interaction. While flux-mediated optomechanical systems open the door for the exploration of optomechanical single-photon effects, ultimately allowing for the generation of non-classical states in mechanical oscillators and for the creation of optomechanical qubits, the realization of photon-pressure systems brings rich possibilities for quantum-limited sensing and quantum signal processing, representing a first step towards radio-frequency quantum photonics. Besides presenting the experimental work done with the systems described above, this thesis also provides a theoretical description of their working principle, details on their fabrication, and insights on maximizing their single-photon coupling strengths as well as an overview of the experimental challenges associated with SQUID cavities.
We propose and analyze a circuit that implements a nonlinear coupling between two superconducting microwave resonators. The resonators are coupled through a superconducting quantum interference device that terminates one of the resonators. This produces a nonlinear interaction of the standard optomechanical form, where the quadrature of one resonator couples to the photon number of the other resonator. The circuit therefore allows for all-electrical realizations of analogs to optomechanical systems, with coupling that can be both strong and tunable. We estimate the coupling strengths that should be attainable with the proposed device, and we find that the device is a promising candidate for realizing the single-photon strong-coupling regime. As a potential application, we discuss implementations of networks of nonlinearly coupled microwave resonators, which could be used in microwave-photon-based quantum simulation.
Superconducting cavities with high quality factors play an essential role in circuit quantum electrodynamics and quantum computing. In measurements of the intrinsic loss rates of high frequency modes, it can be challenging to design an appropriate coupling to the measurement circuit in such a way that the resulting signal is sufficiently strong but also that this coupling does not lead to an unwanted loading circuit, obscuring the intrinsic internal loss rates. Here, we propose and demonstrate a spectroscopic probe of high-Q resonators based on the phenomena of electromagnetically induced transparency (EIT) between the resonator and qubit in the weak dispersive coupling regime. Applying a sideband drive signal to the qubit, we observe an interference dip originated from EIT in the qubit spectroscopy, originating from the quantum interference between the qubit probe signal and sideband transition. From the width and the depth of the dip, we are able to extract the single-photon linewidth of the resonator from an analytical model. Working in a previously unexplored regime in which the qubit has a larger linewidth than the resonator reduces the technical challenge of making a high-coherence qubit and is advantageous for remaining in the weakly invasive limit of coupling to the resonator. Furthermore, the sideband and the dispersive coupling between the resonator and the qubit can be tuned insituin\phantom{\rule{3.33333pt}{0ex}}situinsitu controlling the strength of the sideband drive power. This in situ tuneability allows the technique to be applied for efficient measurement of the resonator loss rate for any quality factor below a fixed upper bound, on the order of 108{10}^{8}108 for our device, allowing a wide range of quality factors to be probed using a single design.
Superconducting qubits, realized by incorporating Josephson junctions into superconducting circuits, behave as artificial atoms with anharmonic energy spectra and can be precisely controlled and measured using microwave cavities within the framework of circuit quantum electrodynamics (cQED). Since its emergence in the early 2000s, cQED has established superconducting qubits as leading candidates for scalable quantum devices and has enabled the exploration of hybrid quantum systems that integrate disparate physical platformsThis review surveys superconducting hybrid quantum electromechanical systems in which mechanical resonators are coupled to superconducting qubits, with a focus on two widely used qubit platforms: the transmon and the fluxonium. We provide an overview of the underlying coupling mechanisms arising from interactions through the phase and charge degrees of freedom of the qubit, and discuss how these mechanisms give rise to both longitudinal and transverse qubit-mechanical interactions. We further review extensions of electromechanical platforms to electro-optomechanical architectures, in which optical cavities are integrated to enable coherent interfacing between superconducting circuits and optical photons. This review aims to present a unified framework and perspective on qubit-mechanical and qubit-mechanical-optical hybrid systems in superconducting quantum technologies and applications related to sensors.