Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1711.04637 · Journal of Low Temperature Physics

Electron–Phonon Coupling in Ti/TiN MKIDs Multilayer Microresonator

M. Faverzani, P. K. Day, E. Ferri, Andrea Giachero, B. Margesin, R. Mezzena, Angelo Nucciotti, Andrei Puiu

Published Jun 13, 2018• 0 citations
arXivHTMLPDF
DOI
10.1007/s10909-018-1992-2

Related papers

Optimizing Ti/TiN Multilayers for UV, Optical and Near-IR Microwave Kinetic Inductance Detectors

Gerhard Ulbricht, Mario de Lucia, Jack Piercy +4 more

Abstract Microwave Kinetic Inductance Detectors (MKIDs) combine significant advantages for photon detection like single photon counting, single pixel energy resolution, vanishing dark counts and µs time resolution with a simple design and the feasibility to scale up into the megapixel range. But high quality MKID fabrication remains challenging as established superconductors tend to either have intrinsic disadvantages, are challenging to deposit or require very low operating temperatures. As alternating stacks of thin Ti and TiN films have shown very impressive results for far-IR and sub-mm MKIDs, they promise significant improvements for UV, visible to near-IR MKIDs as well, especially as they are comparably easy to fabricate and control. In this paper, we present our ongoing project to adapt proximity coupled superconducting films for photon counting MKIDs. Some of the main advantages of Ti/TiN multilayers are their good control of critical temperature (Tc) and their great homogeneity of Tc even over large wafers, promising improved pixel yield especially for large arrays. We demonstrate the effect different temperatures during fabrication have on the detector performance and discuss excess phase noise observed caused by surface oxidization of exposed Si. Our first prototypes achieved photon energy resolving powers of up to 3.1 but turned out to be much too insensitive. As the work presented is still in progress, we also discuss further improvements planned for the near future.

Journal of Low Temperature Physics•May 15, 2024•1 citation

Observation of strong coupling between one atom and a monolithic microresonator

Takao Aoki, Barak Dayan, E. Wilcut +5 more

arXiv:quant-ph/0606033•Nature•Oct 1, 2006•776 citations

Experimental progress toward single phonon creation in a mechanical resonator

A. D. O’Connell, M. Ansmann, Radoslaw C. Bialczak +8 more

Bulletin of the American Physical Society•Mar 18, 2009•0 citations

Noise analysis and optical response of microwave kinetic inductance detectors with an optical stack

Paul Nicaise, Jie Hu, Christine Chaumont +4 more

Abstract We report on the experimental investigation of optical coupling for superconducting microresonators known as microwave kinetic inductance detectors (MKIDs) in the visible and near-infrared bands. MKIDs are photon-counting, time and energy-resolving detectors that still suffer from a poor quantum efficiency. To improve this efficiency, we propose to add a superconducting reflective layer below the absorbing part of the detector separated by a transparent Al2O3 layer with a quarter-wavelength thickness optimized around a single wavelength λ = 405 nm. We have first fabricated samples patterned from stoichiometric TiN ( T c ∼ 4 K), one with the full optical stack, one without for reference and one with a partial optical stack in order to characterize the noise influence of each layer individually. We observe that the full optical stack geometry has the most impact on the resonator’s noise and quality factors. A second design was fabricated to characterize the optical response to short pulses of the optical stack and we show from both the frequential noise and optical response that a strong signature of TLS is still present in the optical stack sample. We have finally obtained single-photon response with the optical stack using a more sensitive tri-layer TiN/Ti/TiN absorber ( T c ∼ 1.3 K) for which a maximum energy resolving power of R = E / Δ E ∼ 1.3 was achieved using 405 nm laser pulses at 225 mK. The quality factors of both the reference and optical stack samples are similar but the frequency noise is still a tenfold higher for the optical stack sample which degrades the energy-resolving power of the detector.

Superconductor Science and Technology•Jun 24, 2024•0 citations

Proximity-coupled Ti/TiN multilayers for use in kinetic inductance detectors

Michael R. Vissers, Jiansong Gao, Martin Sandberg +4 more

We apply the superconducting proximity effect in TiN/Ti multi-layer films to tune the critical temperature, TC, to within 10 mK with high uniformity (less than 15 mK spread) across a 75 mm wafer. Reproducible TC’s are obtained from 0.8 to 2.5 K. These films had high resistivities, >100μΩ cm, and internal quality factors for resonators in the GHz range, on the order of 100 k and higher. Trilayers of both TiN/Ti/TiN and thicker superlattice films were prepared, demonstrating a well controlled process for films over a wide thickness range. Detectors were fabricated and shown to have single photon resolution at 1550 nm. The high uniformity and controllability coupled with the high quality factor, kinetic inductance, and inertness of TiN make these films ideal for use in frequency multiplexed kinetic inductance detectors and potentially other applications such as nanowire detectors, transition edge sensors, and associated quantum information applications.

arXiv:1209.4853•Applied Physics Letters•Jun 10, 2013•78 citations

Unconventional Phonon Blockade in a Nanomechanical Resonator Coupled to Double Qubit System

Debabrata Ganthya, Arumay Parai, Paresh Chandra Jana

Brazilian Journal of Physics•May 14, 2025•0 citations
Abstract Microwave Kinetic Inductance Detectors (MKIDs) combine significant advantages for photon detection like single photon counting, single pixel energy resolution, vanishing dark counts and µs time resolution with a simple design and the feasibility to scale up into the megapixel range. But high quality MKID fabrication remains challenging as established superconductors tend to either have intrinsic disadvantages, are challenging to deposit or require very low operating temperatures. As alternating stacks of thin Ti and TiN films have shown very impressive results for far-IR and sub-mm MKIDs, they promise significant improvements for UV, visible to near-IR MKIDs as well, especially as they are comparably easy to fabricate and control. In this paper, we present our ongoing project to adapt proximity coupled superconducting films for photon counting MKIDs. Some of the main advantages of Ti/TiN multilayers are their good control of critical temperature (Tc) and their great homogeneity of Tc even over large wafers, promising improved pixel yield especially for large arrays. We demonstrate the effect different temperatures during fabrication have on the detector performance and discuss excess phase noise observed caused by surface oxidization of exposed Si. Our first prototypes achieved photon energy resolving powers of up to 3.1 but turned out to be much too insensitive. As the work presented is still in progress, we also discuss further improvements planned for the near future.
Abstract We report on the experimental investigation of optical coupling for superconducting microresonators known as microwave kinetic inductance detectors (MKIDs) in the visible and near-infrared bands. MKIDs are photon-counting, time and energy-resolving detectors that still suffer from a poor quantum efficiency. To improve this efficiency, we propose to add a superconducting reflective layer below the absorbing part of the detector separated by a transparent Al2O3 layer with a quarter-wavelength thickness optimized around a single wavelength λ = 405 nm. We have first fabricated samples patterned from stoichiometric TiN ( T c ∼ 4 K), one with the full optical stack, one without for reference and one with a partial optical stack in order to characterize the noise influence of each layer individually. We observe that the full optical stack geometry has the most impact on the resonator’s noise and quality factors. A second design was fabricated to characterize the optical response to short pulses of the optical stack and we show from both the frequential noise and optical response that a strong signature of TLS is still present in the optical stack sample. We have finally obtained single-photon response with the optical stack using a more sensitive tri-layer TiN/Ti/TiN absorber ( T c ∼ 1.3 K) for which a maximum energy resolving power of R = E / Δ E ∼ 1.3 was achieved using 405 nm laser pulses at 225 mK. The quality factors of both the reference and optical stack samples are similar but the frequency noise is still a tenfold higher for the optical stack sample which degrades the energy-resolving power of the detector.
We apply the superconducting proximity effect in TiN/Ti multi-layer films to tune the critical temperature, TC, to within 10 mK with high uniformity (less than 15 mK spread) across a 75 mm wafer. Reproducible TC’s are obtained from 0.8 to 2.5 K. These films had high resistivities, >100μΩ cm, and internal quality factors for resonators in the GHz range, on the order of 100 k and higher. Trilayers of both TiN/Ti/TiN and thicker superlattice films were prepared, demonstrating a well controlled process for films over a wide thickness range. Detectors were fabricated and shown to have single photon resolution at 1550 nm. The high uniformity and controllability coupled with the high quality factor, kinetic inductance, and inertness of TiN make these films ideal for use in frequency multiplexed kinetic inductance detectors and potentially other applications such as nanowire detectors, transition edge sensors, and associated quantum information applications.