Focal plane arrays consisting of low-noise, polarisation-sensitive detectors have made possible the pioneering advances in the study of the cosmic microwave background (CMB). To make further progress, the next generation of CMB experiments (e.g. CMB-S4) will require a substantial increase in the number of detectors compared to current instruments. Arrays of kinetic inductance detectors (KIDs) provide a possible path to realising such large-format arrays owing to their intrinsic multiplexing advantage and relative cryogenic simplicity. In this paper, we report on the design of a variant of the traditional KID design: the antenna-coupled lumped-element KID. A polarisation-sensitive twin-slot antenna placed behind an optimised hemispherical lens couples power onto a thin-film superconducting microstrip line. The power is then guided into the inductive section of an aluminium KID, where it is absorbed and modifies both the resonant frequency and quality factor of the KID. We present the various aspects of the design and preliminary results from the first set of seven-element prototype arrays and compare to the expected modelled performance.
Future ground-based cosmic microwave background (CMB) experiments will require more than
105 polarization sensitive pixels covering multiple atmospheric bands. The scientific potential for such an experiment is impressive; however, the technical challenges are daunting: such an instrument will require square meters of focal plane covered in background limited cryogenic detectors and a dramatic increase in readout capability. We are developing novel kinetic inductance detectors (KIDs) optimized for this purpose. These devices use a twin-slot microwave antenna, superconducting Nb transmission line, and a novel coupling scheme that deposits mm-wavelength power onto a high-resistivity meander deposited as the first layer on a bare Si wafer. This architecture allows us to independently adjust the detector and antenna properties and to pursue multi-band designs. We have fabricated superconducting resonators made from atomic layer deposited (ALD) titanium nitride (TiN), with thicknesses ranging from 3 to 40 nm. We find a strong dependence of transition temperature on thickness, from 0.6 to 4.2 K for our thinnest and thickest films, respectively. In dark measurements, we find internal quality factors that range from
104 to
7×105 depending on film thickness, and kinetic inductance as high as 8 nH/square. The very small volumes and high kinetic inductance make it possible to engineer extremely sensitive detectors with inductor volumes approaching a few cubic microns that operate at readout frequencies of tens to hundreds of MHz. By taking advantage of the large fractional bandwidth available at low frequencies, we expect to achieve multiplexing densities that exceed that of state of the art TES arrays even without further improvements in film quality factor. We will present the characterization of film properties and dark devices, as well as well as initial optical results for antenna coupled single-band and single-pol devices. We will also discuss designs and sensitivity projections for future dual-pol and multi-band arrays ready for deployment in near-future CMB instruments.