Level repulsion---the opening of a gap between two degenerate modes due to coupling---is ubiquitous anywhere from solid-state theory to quantum chemistry. In contrast, if one mode has negative energy, the mode frequencies attract instead. They converge and develop imaginary components, leading to an instability; an exceptional point marks the transition. This only occurs if the dissipation rates of the two modes are comparable. Here we expose a theoretical framework for the general phenomenon and realize it experimentally through engineered dissipation in a multimode superconducting microwave optomechanical circuit. Level attraction is observed for a mechanical oscillator and a superconducting microwave cavity, while an auxiliary cavity is used for sideband cooling. Two exceptional points are demonstrated that could be exploited for their topological properties.
Level repulsion---the opening of a gap between two degenerate modes due to coupling---is ubiquitous anywhere from solid-state theory to quantum chemistry. In contrast, if one mode has negative energy, the mode frequencies attract instead. They converge and develop imaginary components, leading to an instability; an exceptional point marks the transition. This only occurs if the dissipation rates of the two modes are comparable. Here we expose a theoretical framework for the general phenomenon and realize it experimentally through engineered dissipation in a multimode superconducting microwave optomechanical circuit. Level attraction is observed for a mechanical oscillator and a superconducting microwave cavity, while an auxiliary cavity is used for sideband cooling. Two exceptional points are demonstrated that could be exploited for their topological properties.
Harmonic oscillators might be one of the most fundamental entities described by physics. Yet they stay relevant in recent research. The topological properties associated with exceptional points that can occur when two modes interact have generated much interest in recent years. Harmonic oscillators are also at the heart of new quantum technological applications: the long lifetime of high-Q resonators make them advantageous as quantum memories, and they are employed for narrowband processing of quantum signals, as in Josephson parametric amplifiers. The goal of this thesis is to explore different fundamental regimes of two coupled harmonic oscillators using cavity optomechanics as the experimen- tal platform. With consistent progress in attaining ever increasing Q factors, mechanical and electromagnetic resonators realize near-ideal harmonic oscillators. By parametrically modulating the nonlinear optomechanical interaction between them, an effective linear coupling is achieved, which is tunable in strength and in the relative frequencies of the two modes. Thus cavity optomechanics provides a framework with excellent control over system parameters for the study of two coupled harmonic modes. The specific optomechanical implementation employed are superconducting circuits with the vibrating top plate of a capacitor as the mechanical element. Multimode optomechanical circuits are realized, with two microwave modes interacting with one or two mechanical oscillators. The supplementary modes serve either as intermediaries in the relation of the two modes of interest, or as auxiliaries used to control a parameter of the system. Three main experimental results are achieved. First, an auxiliary microwave mode allows the engineering of the effective dissipation rate of a mechanical oscillator. The latter then acts as a reservoir for the main microwave mode with which it interacts. The microwave mode susceptibility can be tuned, resulting in an instability akin to that of a maser and in resonant amplification of incoming microwave signals with an added noise close to the quantum minimum. Second, we study the conditions for a nonreciprocal interaction between two microwave modes, when the information flows in one direction but not in the other. The two modes interact through two mechanical oscillators, leading to frequency conversion between the two cavities. Dissipation in the mechanical modes is essential to the scheme in two ways: it provides a reciprocal phase necessary for the interference and eliminates the unwanted signals. Third, level attraction between a microwave and a mechanical mode is demonstrated, where the eigenfrequencies of the system are drawn closer as the result of interaction, rather distancing themselves as in the more usual case of level repulsion. The phenomenon is theoretically connected to exceptional points, and a general classification of the possible regimes of interaction between two harmonic modes is exposed, including level repulsion and attraction as special cases.
Isolation of a system from its environment is often desirable; however, dissipation can also be a useful resource. Remarkably, engineered dissipation enables the preparation and stabilization of quantum states of atoms, ions or superconducting qubits. This is achieved by a suitably engineered coupling to a dissipative cold reservoir formed by electromagnetic modes. Similarly, in the field of cavity electro- and optomechanics the control over mechanical oscillators utilizes the inherently cold dissipative nature of the electromagnetic degree of freedom. Breaking from this paradigm, recent theoretical work has considered the opposite regime in which the dissipation of the mechanical oscillator dominates and provides a cold dissipative reservoir to the electromagnetic mode. Here we report the experimental realization of this reversed dissipation regime in a microwave cavity optomechanical system and realize a quasi-instantaneous, cold reservoir for microwave light. We evidence this regime by decreasing or increasing the damping rate of the cavity on demand, that corresponds to amplification and de-amplification of the microwave field. Additionally, we observe the onset of parametric instability, i.e. the stimulated emission of microwaves (masing). Moreover, we employ the engineered cold reservoir to implement a low-noise, large-gain phase-preserving amplifier. Beyond offering the manipulation of microwave fields, such a dissipative reservoir for microwave light, when coupled to multiple cavity modes, forms the basis of microwave entanglement schemes, electromechanical amplifiers with unlimited gain-bandwidth product and dissipative quantum phase transitions. Equally important, combining such reservoir-mediated interaction with coherent dynamics allows for the realization of non-reciprocal devices, which would extend the available toolbox of quantum-limited microwave manipulation techniques.
A primary challenge in quantum science and technology is to isolate the fragile quantum states from their environment in order to prevent the irreversible leakage of energy and information which causes decoherence. In the late 1990s, however, a new paradigm emerged, in which the environment itself, as well as the coupling to this environment of the quantum state, are engineered in ways which, counterintuitively, facilitate the creation and stabilization of desired quantum properties. This paradigm, coined reservoir engineering, has been pursued experimentally in various implementations, in which the states of trapped ions, atomic clouds or artificial atoms based on superconducting circuits were driven into a desired target state using a dissipative reservoir. In all these cases, the cold electromagnetic environment served as the engineered reservoir, capitalizing on the tremendous progress in the ability to shape the modes of the electromagnetic field using masers and lasers. In optomechanics, which is the study of the coupling between light and mechanical motion, a similar scenario has been prevalent. Light is used to read out and control the mechanical motion, and in the past few years, various optomechanical architectures both in the optical and microwave domain have enabled to push mechanical systems into the quantum regime. These results can be interpreted in the context of reservoir engineering: cooling and many other optomechanical phenomena exploit the cold, dissipative nature of light. This thesis reports on the development of a multimode superconducting circuit with a mechanically compliant element - fitting into the field of circuit cavity electromechanics -, with which we pursue two themes. In the first set of experiments, reversing the roles of dissipation described above, we engineer the mechanical oscillator into a cold, dissipative environment for microwave light. The mechanical element is the fundamental mode of a free-standing top electrode of a capacitor, 100 nm thick and 32 micron in diameter made of aluminum with an effective mass of around 170 pg, vibrating at a resonance frequency of 5.5 MHz. The dissipative mechanical reservoir is prepared using an auxiliary microwave mode with engineered parameters.We utilize it to control the properties - in particular, the susceptibility - of the electromagnetic field and to perform low-noise amplification close to the quantum limit. The noise analysis reveals that the reservoir is close to its quantum ground state with a mean thermal occupation number well below 1, demonstrating its utility as a resource in the quantum regime. We also show that the system can be driven to the parametric instability threshold, above which self-sustained oscillations of the microwave field (masing) is observed. Finally, we demonstrate injection locking of the maser using an external seed pump. In a second set of experiments, a similar electromechanical circuit is used to implement a microwave isolator based on optomechanical interactions. The overarching theme is that dissipation of the mechanical oscillator, albeit intrinsic and not engineered via an auxiliary mode s a key ingredient for the device to function as a nonreciprocal frequency converter and isolator. In these experiments, an additional mechanical mode is used, such that a 4-mode optomechanical plaquette is realized.
Harmonic oscillators belong to the most fundamental concepts in physics and are central to many current research fields such as circuit QED, cavity optomechanics, and photon pressure systems. Here, we engineer a microwave mode in a superconducting LC circuit that mimics the dynamics of a negative mass oscillator, and couple it via photon pressure to a second low-frequency circuit. We demonstrate that the effective negative mass dynamics lead to an inversion of dynamical backaction and to sideband cooling of the low-frequency circuit by a blue-detuned pump field, which can be intuitively understood by the inverted energy ladder of a negative mass oscillator.
Nonlinear Josephson circuits play a crucial role in the growing landscape of quantum information and technologies. The typical circuits studied in this field consist of qubits, whose anharmonicity is much larger than their linewidth, and also of parametric amplifiers, which are engineered with linewidths of tens of MHz or more. The regime of small anharmonicity but also narrow linewidth, corresponding to the dynamics of a high-Q Duffing oscillator, has not been extensively explored using Josephson cavities. Here, we use two-tone spectroscopy to study the susceptibility of a strongly driven high-Q Josephson microwave cavity. Under blue-detuned driving, we observe a shift of the cavity susceptibility, analogous to the AC Stark effect in atomic physics. When applying a strong red-detuned drive, we observe the appearance of an additional idler mode above the bifurcation threshold with net external gain. Strong driving of the circuit leads to the appearance of two exceptional points and a level attraction between the quasi-modes of the driven cavity. Our results provide insights on the physics of driven nonlinear Josephson resonators and form a starting point for exploring topological physics in strongly-driven Kerr oscillators.
Cavity optomechanics enables controlling mechanical motion via radiation pressure interaction, and has contributed to the quantum control of engineered mechanical systems ranging from kg scale LIGO mirrors to nano-mechanical systems, enabling entanglement, squeezing of mechanical objects, to position measurements at the standard quantum limit, and quantum transduction. Yet, nearly all prior schemes have employed single- or few-mode optomechanical systems. In contrast, novel dynamics and applications are expected when utilizing optomechanical arrays and lattices, which enable to synthesize non-trivial band structures, and have been actively studied in the field of circuit QED. Superconducting microwave optomechanical circuits are a promising platform to implement such lattices, but have been compounded by strict scaling limitations. Here we overcome this challenge and realize superconducting circuit optomechanical lattices. We demonstrate non-trivial topological microwave modes in 1-D optomechanical chains as well as 2-D honeycomb lattices, realizing the canonical Su-Schrieffer-Heeger (SSH) model. Exploiting the embedded optomechanical interaction, we show that it is possible to directly measure the mode shapes, without using any local probe or inducing perturbation. This enables us to reconstruct the full underlying lattice Hamiltonian beyond tight-binding approximations, and directly measure the existing residual disorder. The latter is found to be sufficiently small to observe fully hybridized topological edge modes. Such optomechanical lattices, accompanied by the measurement techniques introduced, offers an avenue to explore out of equilibrium physics in optomechanical lattices such as quantum and quench dynamics, topological properties and more broadly, emergent nonlinear dynamics in complex optomechanical systems with a large number of degrees of freedoms.