Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1709.00990 · Physical Review A

Repetition code of 15 qubits

James R. Wootton, Daniel Loss

Published May 10, 2018• 61 citations
arXivHTMLPDF

Abstract

The repetition code is an important primitive for the techniques of quantum error correction. Here we implement repetition codes of at most 15 qubits on the 16 qubit ibmqx3 device. Each experiment is run for a single round of syndrome measurements, achieved using the standard quantum technique of using ancilla qubits and controlled operations. The size of the final syndrome is small enough to allow for lookup table decoding using experimentally obtained data. The results show strong evidence that the logical error rate decays exponentially with code distance, as is expected and required for the development of fault-tolerant quantum computers. The results also give insight into the nature of noise in the device.

DOI
10.1103/physreva.97.052313

Related papers

Fault-Tolerant Quantum Error Correction: Implementing Hamming-Based Codes with Advanced Syndrome Extraction Techniques

Soham Bhadra, Diyansha Singh, Angana Chowdhury

Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane $[\![7,1,3]\!]$ code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors - a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we're trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor's cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane's encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM's Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4$\times$ compared to standard approaches. Our implementations achieve logical error rates as low as $5.1 \times 10^{-5}$ under realistic noise conditions with physical error rates of $10^{-3}$, while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.

quant-pharXiv:2601.07860•Jan 13, 2026•0 citations

Syndrome-Derived Error Rates as a Benchmark of Quantum Hardware

James R. Wootton

Quantum error correcting codes are designed to pinpoint exactly when and where errors occur in quantum circuits. This feature is the foundation of their primary task: to support fault-tolerant quantum computation. However, this feature could used as the basis of benchmarking: By analyzing the outputs of even small-scale quantum error correction circuits, a detailed picture can be constructed of error processes across a quantum device. Here we perform an example of such an analysis, using the results of small repetition codes to determine the error rate of each qubit while idle during a syndrome measurement. This provides an idea of the errors experienced by the qubits across a device while they are part of the kind of circuit that we expect to be typical in fault-tolerant quantum computers.

arXiv:2207.00553•Jul 1, 2022•3 citations

Fault-Tolerant Quantum Error Correction: Implementing Hamming-Based Codes with Advanced Syndrome Extraction Techniques

Soham Bhadra, Diyansha Singh, Angana Chowdhury

Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [[7,1,3]] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors—a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we’re trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor’s cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane’s encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM’s Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4×compared to standard approaches. Our implementations achieve logical error rates as low as 5.1 ×10^−5 under realistic noise conditions with physical error rates of 10^−3, while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.

•Dec 31, 2025•0 citations

Fault-Tolerant Quantum Error Correction: Implementing Hamming-Based Codes with Advanced Syndrome Extraction Techniques

Soham Bhadra, Diyansha Singh, Angana Chowdhury

Abstract Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [7,1,3] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors—a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we're trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor's cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane's encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM's Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4x compared to standard approaches. Our implementations achieve logical error rates as low as 5.1 x 10 -5 under realistic noise conditions with physical error rates of 10 -3 , while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.

•Jan 6, 2026•0 citations

Soft information decoding with superconducting qubits

Maurice Hanisch, Bence Hetényi, James R. Wootton

Quantum error correction promises a viable path to fault-tolerant computations, enabling exponential error suppression when the device's error rates remain below the protocol's threshold. However, this threshold strongly depends on the classical method used to decode the measurements of the syndrome. These classical algorithms traditionally only interpret binary data, ignoring valuable information contained in complete analog measurement data. We present the first large-scale experimental verification of soft decoding by implementing repetition codes up to distance 51 on superconducting hardware. Unlike previous demonstrations limited to small code distances, this extensive range allows us to confirm a fundamental improvement in the exponential scaling of error suppression rather than a mere constant-factor reduction in error rates. We observe a 25% increase in the threshold, which yields logical error rates up to 30 times lower than standard hard decoding. Analyzing the trade-off between information volume and decoding performance, we show that a single byte of information per measurement suffices to reach optimal decoding. This underscores the effectiveness and practicality of soft decoding on hardware, including in time-sensitive contexts such as real-time decoding.

arXiv:2411.16228•APS Open Science•Apr 30, 2026•0 citations

Exponential suppression of bit or phase flip errors with repetitive quantum error correction

Zijun Chen, Kevin J. Satzinger, Juan Atalaya +88 more

Realizing the potential of quantum computing will require achieving sufficiently low logical error rates. Many applications call for error rates in the $10^{-15}$ regime, but state-of-the-art quantum platforms typically have physical error rates near $10^{-3}$. Quantum error correction (QEC) promises to bridge this divide by distributing quantum logical information across many physical qubits so that errors can be detected and corrected. Logical errors are then exponentially suppressed as the number of physical qubits grows, provided that the physical error rates are below a certain threshold. QEC also requires that the errors are local and that performance is maintained over many rounds of error correction, two major outstanding experimental challenges. Here, we implement 1D repetition codes embedded in a 2D grid of superconducting qubits which demonstrate exponential suppression of bit or phase-flip errors, reducing logical error per round by more than $100\times$ when increasing the number of qubits from 5 to 21. Crucially, this error suppression is stable over 50 rounds of error correction. We also introduce a method for analyzing error correlations with high precision, and characterize the locality of errors in a device performing QEC for the first time. Finally, we perform error detection using a small 2D surface code logical qubit on the same device, and show that the results from both 1D and 2D codes agree with numerical simulations using a simple depolarizing error model. These findings demonstrate that superconducting qubits are on a viable path towards fault tolerant quantum computing.

•Feb 11, 2021•8 citations
The repetition code is an important primitive for the techniques of quantum error correction. Here we implement repetition codes of at most 15 qubits on the 16 qubit ibmqx3 device. Each experiment is run for a single round of syndrome measurements, achieved using the standard quantum technique of using ancilla qubits and controlled operations. The size of the final syndrome is small enough to allow for lookup table decoding using experimentally obtained data. The results show strong evidence that the logical error rate decays exponentially with code distance, as is expected and required for the development of fault-tolerant quantum computers. The results also give insight into the nature of noise in the device.
Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [ ⁣[7,1,3] ⁣][\![7,1,3]\!][[7,1,3]] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors - a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we're trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor's cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane's encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM's Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4×\times× compared to standard approaches. Our implementations achieve logical error rates as low as 5.1×10−55.1 \times 10^{-5}5.1×10−5 under realistic noise conditions with physical error rates of 10−310^{-3}10−3, while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.
Quantum error correcting codes are designed to pinpoint exactly when and where errors occur in quantum circuits. This feature is the foundation of their primary task: to support fault-tolerant quantum computation. However, this feature could used as the basis of benchmarking: By analyzing the outputs of even small-scale quantum error correction circuits, a detailed picture can be constructed of error processes across a quantum device. Here we perform an example of such an analysis, using the results of small repetition codes to determine the error rate of each qubit while idle during a syndrome measurement. This provides an idea of the errors experienced by the qubits across a device while they are part of the kind of circuit that we expect to be typical in fault-tolerant quantum computers.
Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [[7,1,3]] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors—a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we’re trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor’s cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane’s encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM’s Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4×compared to standard approaches. Our implementations achieve logical error rates as low as 5.1 ×10^−5 under realistic noise conditions with physical error rates of 10^−3, while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.
Abstract Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [7,1,3] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors—a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we're trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor's cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane's encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM's Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4x compared to standard approaches. Our implementations achieve logical error rates as low as 5.1 x 10 -5 under realistic noise conditions with physical error rates of 10 -3 , while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.
Quantum error correction promises a viable path to fault-tolerant computations, enabling exponential error suppression when the device's error rates remain below the protocol's threshold. However, this threshold strongly depends on the classical method used to decode the measurements of the syndrome. These classical algorithms traditionally only interpret binary data, ignoring valuable information contained in complete analog measurement data. We present the first large-scale experimental verification of soft decoding by implementing repetition codes up to distance 51 on superconducting hardware. Unlike previous demonstrations limited to small code distances, this extensive range allows us to confirm a fundamental improvement in the exponential scaling of error suppression rather than a mere constant-factor reduction in error rates. We observe a 25% increase in the threshold, which yields logical error rates up to 30 times lower than standard hard decoding. Analyzing the trade-off between information volume and decoding performance, we show that a single byte of information per measurement suffices to reach optimal decoding. This underscores the effectiveness and practicality of soft decoding on hardware, including in time-sensitive contexts such as real-time decoding.
Realizing the potential of quantum computing will require achieving sufficiently low logical error rates. Many applications call for error rates in the 10−1510^{-15}10−15 regime, but state-of-the-art quantum platforms typically have physical error rates near 10−310^{-3}10−3. Quantum error correction (QEC) promises to bridge this divide by distributing quantum logical information across many physical qubits so that errors can be detected and corrected. Logical errors are then exponentially suppressed as the number of physical qubits grows, provided that the physical error rates are below a certain threshold. QEC also requires that the errors are local and that performance is maintained over many rounds of error correction, two major outstanding experimental challenges. Here, we implement 1D repetition codes embedded in a 2D grid of superconducting qubits which demonstrate exponential suppression of bit or phase-flip errors, reducing logical error per round by more than 100×100\times100× when increasing the number of qubits from 5 to 21. Crucially, this error suppression is stable over 50 rounds of error correction. We also introduce a method for analyzing error correlations with high precision, and characterize the locality of errors in a device performing QEC for the first time. Finally, we perform error detection using a small 2D surface code logical qubit on the same device, and show that the results from both 1D and 2D codes agree with numerical simulations using a simple depolarizing error model. These findings demonstrate that superconducting qubits are on a viable path towards fault tolerant quantum computing.