Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1708.00749 · Quantum

Precision and Work Fluctuations in Gaussian Battery Charging

Nicolai Friis, Marcus Huber

Published Apr 23, 2018• 143 citations
arXivHTMLPDF

Abstract

One of the most fundamental tasks in quantum thermodynamics is extracting energy from one system and subsequently storing this energy in an appropriate battery. Both of these steps, work extraction and charging, can be viewed as cyclic Hamiltonian processes acting on individual quantum systems. Interestingly, so-called passive states exist, whose energy cannot be lowered by unitary operations, but it is safe to assume that the energy of any not fully charged battery may be increased unitarily. However, unitaries raising the average energy by the same amount may differ in qualities such as their precision, fluctuations, and charging power. Moreover, some unitaries may be extremely difficult to realize in practice. It is hence of crucial importance to understand the qualities that can be expected from practically implementable transformations. Here, we consider the limitations on charging batteries when restricting to the feasibly realizable family of Gaussian unitaries. We derive optimal protocols for general unitary operations as well as for the restriction to easier implementable Gaussian unitaries. We find that practical Gaussian battery charging, while performing significantly less well than is possible in principle, still offers asymptotically vanishing relative charge variances and fluctuations.

DOI
10.22331/q-2018-04-23-61

Related papers

Trade-offs between precision and fluctuations in charging finite-dimensional quantum batteries

Pharnam Bakhshinezhad, Beniamin R. Jablonski, Felix C. Binder +1 more

Within quantum thermodynamics, many tasks are modeled by processes that require work sources represented by out-of-equilibrium quantum systems, often dubbed quantum batteries, in which work can be deposited or from which work can be extracted. Here we consider quantum batteries modeled as finite-dimensional quantum systems initially in thermal equilibrium that are charged via cyclic Hamiltonian processes. We present optimal or near-optimal protocols for N identical two-level systems and individual d-level systems with equally spaced energy gaps in terms of the charging precision and work fluctuations during the charging process. We analyze the trade-off between these figures of merit as well as the performance of local and global operations.

arXiv:2303.16676•Physical review. E•Jan 22, 2024•18 citations

Passivity and practical work extraction using Gaussian operations

Eric G Brown, Nicolai Friis, Marcus Huber

Quantum states that can yield work in a cyclical Hamiltonian process form one of the primary resources in the context of quantum thermodynamics. Conversely, states whose average energy cannot be lowered by unitary transformations are called passive. However, while work may be extracted from non-passive states using arbitrary unitaries, the latter may be hard to realize in practice. It is therefore pertinent to consider the passivity of states under restricted classes of operations that can be feasibly implemented. Here, we ask how restrictive the class of Gaussian unitaries is for the task of work extraction. We investigate the notion of Gaussian passivity, that is, we present necessary and sufficient criteria identifying all states whose energy cannot be lowered by Gaussian unitaries. For all other states we give a prescription for the Gaussian operations that extract the maximal amount of energy. Finally, we show that the gap between passivity and Gaussian passivity is maximal, i.e., Gaussian-passive states may still have a maximal amount of energy that is extractable by arbitrary unitaries, even under entropy constraints.

arXiv:1608.04977•New Journal of Physics•Nov 16, 2016•69 citations

Reliable quantum advantage in quantum battery charging

Davide Rinaldi, Radim Filip, Dario Gerace +1 more

Quantum batteries represent one of the most promising applications of quantum thermodynamics, whose goal is not only to store energy inside small quantum systems but also to potentially leverage genuine quantum effects to outperform classical counterparts. In this context, however, energy fluctuations become extremely relevant and have a significant impact on the charging efficiency. In our work, we consider a simple yet paradigmatic model in which a flying qubit (the battery) coherently interacts with a single mode optical cavity (the charger) through a number conserving Jaynes-Cummings interaction. By making use of full-counting statistics techniques, we fully characterize the average charging power, its fluctuations and the associated charging efficiency for several different choices of initial states of the optical cavity, demonstrating that preparing the latter in a genuinely quantum non-Gaussian Fock state (rather than a classical or even non-classical Gaussian state) leads to a definite and (in principle) measurable advantage in all these figures of merit.

arXiv:2412.15339•Physical Review A•Jun 9, 2025•19 citations

Bounds on charging power of open quantum batteries

Shadab Zakavati, F. T. Tabesh, S. Salimi

In general, quantum systems most likely undergo open-system dynamics due to their smallness and sensitivity. Energy storage devices, so-called quantum batteries, are not excluded from this phenomenon. Here, we study fundamental bounds on the power of open quantum batteries from the geometric point of view. By defining an activity operator, a tight upper bound on the charging power is derived for the open quantum batteries in terms of the fluctuations of the activity operator and the quantum Fisher information. The variance of the activity operator may be interpreted as a generalized thermodynamic force, while the quantum Fisher information describes the speed of evolution in the state space of the battery. The thermodynamic interpretation of the upper bound is discussed in detail. As an example, a model for the battery, taking into account the environmental effects, is proposed, and the effect of dissipation and decoherence during the charging process on both the stored work and the charging power is investigated. Our results show that the upper bound is saturated in some time intervals. Also, the maximum value of both the stored work and the corresponding power is achieved in the non-Markovian underdamped regime.

arXiv:2003.09814•Physical review. E•Nov 17, 2021•76 citations

Fluctuation in energy extraction from quantum batteries: How open should the system be to control it?

Sarkar, Anindita, Paranjoy Chaki, Priya Ghosh +1 more

We ask whether there exists a relation between controllability of the fluctuations in extractable energy of a quantum battery and (a) how open an arbitrary but fixed battery system is and (b) how large the battery is. We examine three classes of quantum processes for the energy extraction: unitary operations, completely positive trace-preserving (CPTP) maps, and arbitrary quantum maps, including physically realizable non-CPTP maps. We show that all three process classes yield the same average extractable energy from a fixed quantum battery. Moreover, open systems are better at controlling fluctuations in fixed quantum batteries: while random unitary operations result in nonzero fluctuation in the extractable energy, the remaining two classes lead to vanishing fluctuations in extractable energy. Furthermore, when the auxiliary system used to implement the non-unitary physically realizable maps is restricted up to a dimension $n$, fluctuation in extractable energy scales as $1/n$ for CPTP maps, outperforming the $\ln{n}/n$ scaling observed for general quantum maps. Even within open dynamics, therefore, energy extraction via random CPTP maps exhibits greater resilience to fluctuation compared to processes based on arbitrary quantum maps. We subsequently obtain that fluctuations in extractable energy scale as the inverse of the battery's dimension for all three process classes. Unitary maps, therefore, perform - in the sense of as low fluctuation as possible - equally well as more resource-intensive open maps, provided we have access to large quantum batteries. The results underscore a fundamental trade-off between performance of a battery and the resource cost of implementing the extraction processes.

arXiv:2505.16851•May 22, 2025•0 citations

Fluctuations in measurement-based quantum engines and quantum batteries derived from the Kirkwood-Dirac quasiprobability distribution

Abdelkader El Makouri, Abdallah Slaoui, Rachid Ahl Laamara

In this paper, we consider fluctuations in a three-stroke cycle based on quantum measurement. In the first stroke, the engine is fueled by a nonselective quantum measurement; in the second stroke, an appropriate unitary operation is applied to extract work; and finally, the working medium is thermalized to complete the cycle. This protocol is analogous to charging, then discharging, and finally thermalizing a quantum battery. Using the Kirkwood-Dirac quasiprobability, we derive equations that provide insights into the fluctuations of heat and work, and thus into the charging and discharging processes. We then propose a quantum circuit to measure the cumulants of work and heat using a qubit ancilla. Afterward, we derive important upper and lower bounds on fluctuations in heat; this is thanks to the way we decompose heat fluctuations and the Kadison-Schwarz inequality. We also show, for the first time, that the imaginary part of the second cumulant of work equals the linear response of an average work (to be defined in the main text) or the quantum cross entropy. We further introduce an operator whose average defines the battery capacity and whose variance quantifies the corresponding fluctuations of the battery capacity. Our analytical results are illustrated and discussed through representative examples. We believe that our study will, on the one hand, be useful for understanding fluctuations in energy extracted from and injected into quantum batteries based on quantum measurements and, on the other hand, contribute to the foundations of quantum thermodynamics. More generally, our results can be applied beyond the three-stroke cycle considered here, especially to quantum batteries subject to environmental noise and decoherence.

APS Open Science•Apr 30, 2026•0 citations
One of the most fundamental tasks in quantum thermodynamics is extracting energy from one system and subsequently storing this energy in an appropriate battery. Both of these steps, work extraction and charging, can be viewed as cyclic Hamiltonian processes acting on individual quantum systems. Interestingly, so-called passive states exist, whose energy cannot be lowered by unitary operations, but it is safe to assume that the energy of any not fully charged battery may be increased unitarily. However, unitaries raising the average energy by the same amount may differ in qualities such as their precision, fluctuations, and charging power. Moreover, some unitaries may be extremely difficult to realize in practice. It is hence of crucial importance to understand the qualities that can be expected from practically implementable transformations. Here, we consider the limitations on charging batteries when restricting to the feasibly realizable family of Gaussian unitaries. We derive optimal protocols for general unitary operations as well as for the restriction to easier implementable Gaussian unitaries. We find that practical Gaussian battery charging, while performing significantly less well than is possible in principle, still offers asymptotically vanishing relative charge variances and fluctuations.
Within quantum thermodynamics, many tasks are modeled by processes that require work sources represented by out-of-equilibrium quantum systems, often dubbed quantum batteries, in which work can be deposited or from which work can be extracted. Here we consider quantum batteries modeled as finite-dimensional quantum systems initially in thermal equilibrium that are charged via cyclic Hamiltonian processes. We present optimal or near-optimal protocols for N identical two-level systems and individual d-level systems with equally spaced energy gaps in terms of the charging precision and work fluctuations during the charging process. We analyze the trade-off between these figures of merit as well as the performance of local and global operations.
Quantum states that can yield work in a cyclical Hamiltonian process form one of the primary resources in the context of quantum thermodynamics. Conversely, states whose average energy cannot be lowered by unitary transformations are called passive. However, while work may be extracted from non-passive states using arbitrary unitaries, the latter may be hard to realize in practice. It is therefore pertinent to consider the passivity of states under restricted classes of operations that can be feasibly implemented. Here, we ask how restrictive the class of Gaussian unitaries is for the task of work extraction. We investigate the notion of Gaussian passivity, that is, we present necessary and sufficient criteria identifying all states whose energy cannot be lowered by Gaussian unitaries. For all other states we give a prescription for the Gaussian operations that extract the maximal amount of energy. Finally, we show that the gap between passivity and Gaussian passivity is maximal, i.e., Gaussian-passive states may still have a maximal amount of energy that is extractable by arbitrary unitaries, even under entropy constraints.
Quantum batteries represent one of the most promising applications of quantum thermodynamics, whose goal is not only to store energy inside small quantum systems but also to potentially leverage genuine quantum effects to outperform classical counterparts. In this context, however, energy fluctuations become extremely relevant and have a significant impact on the charging efficiency. In our work, we consider a simple yet paradigmatic model in which a flying qubit (the battery) coherently interacts with a single mode optical cavity (the charger) through a number conserving Jaynes-Cummings interaction. By making use of full-counting statistics techniques, we fully characterize the average charging power, its fluctuations and the associated charging efficiency for several different choices of initial states of the optical cavity, demonstrating that preparing the latter in a genuinely quantum non-Gaussian Fock state (rather than a classical or even non-classical Gaussian state) leads to a definite and (in principle) measurable advantage in all these figures of merit.
In general, quantum systems most likely undergo open-system dynamics due to their smallness and sensitivity. Energy storage devices, so-called quantum batteries, are not excluded from this phenomenon. Here, we study fundamental bounds on the power of open quantum batteries from the geometric point of view. By defining an activity operator, a tight upper bound on the charging power is derived for the open quantum batteries in terms of the fluctuations of the activity operator and the quantum Fisher information. The variance of the activity operator may be interpreted as a generalized thermodynamic force, while the quantum Fisher information describes the speed of evolution in the state space of the battery. The thermodynamic interpretation of the upper bound is discussed in detail. As an example, a model for the battery, taking into account the environmental effects, is proposed, and the effect of dissipation and decoherence during the charging process on both the stored work and the charging power is investigated. Our results show that the upper bound is saturated in some time intervals. Also, the maximum value of both the stored work and the corresponding power is achieved in the non-Markovian underdamped regime.
We ask whether there exists a relation between controllability of the fluctuations in extractable energy of a quantum battery and (a) how open an arbitrary but fixed battery system is and (b) how large the battery is. We examine three classes of quantum processes for the energy extraction: unitary operations, completely positive trace-preserving (CPTP) maps, and arbitrary quantum maps, including physically realizable non-CPTP maps. We show that all three process classes yield the same average extractable energy from a fixed quantum battery. Moreover, open systems are better at controlling fluctuations in fixed quantum batteries: while random unitary operations result in nonzero fluctuation in the extractable energy, the remaining two classes lead to vanishing fluctuations in extractable energy. Furthermore, when the auxiliary system used to implement the non-unitary physically realizable maps is restricted up to a dimension nnn, fluctuation in extractable energy scales as 1/n1/n1/n for CPTP maps, outperforming the ln⁡n/n\ln{n}/nlnn/n scaling observed for general quantum maps. Even within open dynamics, therefore, energy extraction via random CPTP maps exhibits greater resilience to fluctuation compared to processes based on arbitrary quantum maps. We subsequently obtain that fluctuations in extractable energy scale as the inverse of the battery's dimension for all three process classes. Unitary maps, therefore, perform - in the sense of as low fluctuation as possible - equally well as more resource-intensive open maps, provided we have access to large quantum batteries. The results underscore a fundamental trade-off between performance of a battery and the resource cost of implementing the extraction processes.
In this paper, we consider fluctuations in a three-stroke cycle based on quantum measurement. In the first stroke, the engine is fueled by a nonselective quantum measurement; in the second stroke, an appropriate unitary operation is applied to extract work; and finally, the working medium is thermalized to complete the cycle. This protocol is analogous to charging, then discharging, and finally thermalizing a quantum battery. Using the Kirkwood-Dirac quasiprobability, we derive equations that provide insights into the fluctuations of heat and work, and thus into the charging and discharging processes. We then propose a quantum circuit to measure the cumulants of work and heat using a qubit ancilla. Afterward, we derive important upper and lower bounds on fluctuations in heat; this is thanks to the way we decompose heat fluctuations and the Kadison-Schwarz inequality. We also show, for the first time, that the imaginary part of the second cumulant of work equals the linear response of an average work (to be defined in the main text) or the quantum cross entropy. We further introduce an operator whose average defines the battery capacity and whose variance quantifies the corresponding fluctuations of the battery capacity. Our analytical results are illustrated and discussed through representative examples. We believe that our study will, on the one hand, be useful for understanding fluctuations in energy extracted from and injected into quantum batteries based on quantum measurements and, on the other hand, contribute to the foundations of quantum thermodynamics. More generally, our results can be applied beyond the three-stroke cycle considered here, especially to quantum batteries subject to environmental noise and decoherence.