In this letter, we investigate the secure energy efficiency (SEE) in a cooperative scenario where all nodes are equipped with multiple antennas. Moreover, we employ secrecy rate and power allocation at Alice and at the relay in order to maximize the SEE, subjected to a constraint in terms of a minimal required secrecy outage probability. Only the channel state information (CSI) with respect to the legitimate nodes is available. Then, we compare the artificial-noise (AN) scheme with CSI-aided decode-and-forward (CSI-DF), which exploits the CSI to choose the best communication path (direct or cooperative). Our results show that CSI-DF outperforms AN in terms of SEE in most scenarios, except when eavesdropper (Eve) is closer to the relay or with the increase of antennas at Eve. Additionally, we also show that the maximization of SEE implies in an optimal number of antennas to be used at each node, which is due to the tradeoff between secure throughput and power consumption.
In this letter, we investigate the secure energy efficiency (SEE) in a cooperative scenario where all nodes are equipped with multiple antennas. Moreover, we employ secrecy rate and power allocation at Alice and at the relay in order to maximize the SEE, subjected to a constraint in terms of a minimal required secrecy outage probability. Only the channel state information (CSI) with respect to the legitimate nodes is available. Then, we compare the artificial-noise (AN) scheme with CSI-aided decode-and-forward (CSI-DF), which exploits the CSI to choose the best communication path (direct or cooperative). Our results show that CSI-DF outperforms AN in terms of SEE in most scenarios, except when eavesdropper (Eve) is closer to the relay or with the increase of antennas at Eve. Additionally, we also show that the maximization of SEE implies in an optimal number of antennas to be used at each node, which is due to the tradeoff between secure throughput and power consumption.
The growing demand for wireless communications systems makes security an important and difficult design task. Therefore, in this thesis we approached different studies at physical layer security considering different scenarios of partial secrecy requirements, multiple antennas and finite blocklenghts. With respect to the partial secrecy regime, we evaluate the secure energy efficiency (SEE) of a cooperative network subject to partial secrecy requirements, implemented through a fractional equivocation parameter θ ϵ (0, 1] that allows partial secrecy when θ < 1. We assume that only the channel state information (CSI) of the legitimate channel is available, while the CSI with respect to the eavesdropper is unknown. Then, we propose a CSI-Aided Decode-and-Forward (DF) scheme, in which the transmitter uses the available CSI in order to choose between direct and cooperative paths. Moreover, the relay employs either Repetition Coding (CSI-RC), i.e., source and relay use the same codebook, or Parallel Coding (CSI-PC), when different codebooks are used. By resorting to the Dinkelbach algorithm, we propose a joint power allocation scheme, which also optimizes θ to maximize the SEE. Our schemes are compared with the traditional DF, Amplify-and-Forward (AF), and Cooperative Jamming (CJ). Extending the previous analysis, we also study the SEE in a cooperative scenario where all nodes are equipped with multiple antennas. Moreover, we employ secrecy rate and power allocation at Alice and at the relay in order to maximize the SEE, subjected to a constraint in terms of a minimal required secrecy outage probability. Considering this MIMO scenario in which only the CSI with respect to the legitimate nodes is available at Alice, we compare the Artificial-Noise (AN) scheme with CSI-Aided Decode-and-Forward (CSI-DF). Lastly, considering a more restrictive scenario with respect to the CSI, but more realistic, in which the legitimate transmitter has no knowledge of the instantaneous channel state information with respect to neither the legitimate receiver nor the eavesdropper, we investigate the secure throughput in a delay-critical scenario, such as in some applications of machine-to-machine communications, so that users communicate with a finite blocklength. In this approach, the performance of direct and selective decode-and-forward cooperative communication strategies are compared.
We investigate the secure energy efficiency of a cooperative network where two legitimate users (Alice and Bob) communicate with the help of a relay node, in the presence of a passive eavesdropper (Eve). Power is adequately allocated between Alice and the relay using a Dinkelbach-based iterative power allocation algorithm. We assume channel state information of the legitimate channel only and compare the secure energy efficiency of several cooperative schemes, namely, selective decode-and-forward (SDF), fixed decode-and-forward (DF), amplify-and-forward (AF) and cooperative jamming (CJ). Our results show that, in terms of secure energy efficiency, SDF outperforms the other cooperative schemes in many scenarios. However, when the transmit rate increases or when Eve is close to the legitimate nodes, CJ stands out as the most advantageous scheme.
This paper investigates cooperative security in wireless networks, where a source (Alice) intends to transmit a confidential message to a legitimate destination (Bob), with the help of a cooperative jammer (Charlie), coexisting with multiple passive eavesdroppers (Eves). In particular, by assuming knowledge of Bob's perfect channel state information (CSI) but only Eves’ statistical CSIs, secrecy beamforming with artificial noise (AN) is utilized for secure transmission, and cooperative jamming (CJ) is explored to further enhance secrecy. We first derive an accurate closed-form expression for the secrecy outage probability (SOP), and establish the condition under which positive secrecy rate is achievable. Then, we provide a secure transmit design for maximizing the SOP constrained secrecy rate. Moreover, based on a strict mathematical analysis, we characterize the impact of the main channel quality and the number of Eves on transmit design and secrecy performance. Specifically, optimal power allocation ratio between the information-bearing signal and the AN signal increases as the main channel quality improves, and decreases with the number of Eves. Numerical results confirm that our design achieves performance improvement in terms of both secrecy rate and secure energy efficiency, as compared to the approach without CJ.
This paper evaluates the secure energy efficiency (SEE) of a cooperative network subject to partial secrecy requirements, implemented through a fractional equivocation parameter θ ∈ (0, 1] that allows partial secrecy when θ <; 1. We assume that only the channel state information (CSI) of the legitimate channel is available, while the CSI with respect to the eavesdropper is unknown. Then, we propose a CSI-aided decode-and-forward (DF) scheme, in which the transmitter uses the available CSI in order to choose between direct and cooperative paths. Moreover, the relay employs either repetition coding (CSI-RC), i.e., source and relay use the same codebook, or parallel coding (CSI-PC), when different codebooks are used. By resorting to the Dinkelbach algorithm, we propose a joint power allocation scheme, which also optimizes θ to maximize the SEE. Our schemes are compared with the traditional DF, amplify- and-forward, and cooperative jamming (CJ). In most scenarios, CSI-RC performs best in terms of SEE. Nevertheless, we observe that CSI-PC achieves the highest SEE when θ → 1 and if the relay is close to either the transmitter or the receiver. Moreover, CJ also stands out to maximize the SEE if the relay is placed closer to the eavesdropper. In addition, the influence of θ in the system performance is evaluated, showing that a joint θ and power optimization considerably improves the SEE.
In this paper, we investigate the secure transmission in wireless sensor networks (WSNs) consisting of one multiple-antenna base station (BS), multiple single-antenna legitimate users, one single-antenna eavesdropper and one multiple-antenna cooperative jammer. In an effort to reduce the scheduling complexity and extend the battery lifetime of the sensor nodes, the switch-and-stay combining (SSC) scheduling scheme is exploited over the sensor nodes. Meanwhile, transmit antenna selection (TAS) is employed at the BS and cooperative jamming (CJ) is adopted at the jammer node, aiming at achieving a satisfactory secrecy performance. Moreover, depending on whether the jammer node has the global channel state information (CSI) of both the legitimate channel and the eavesdropper's channel, it explores a zero-forcing beamforming (ZFB) scheme or a null-space artificial noise (NAN) scheme to confound the eavesdropper while avoiding the interference to the legitimate user. Building on this, we propose two novel hybrid secure transmission schemes, termed TAS-SSC-ZFB and TAS-SSC-NAN, for WSNs. We then derive the exact closed-form expressions for the secrecy outage probability and the effective secrecy throughput of both schemes to characterize the secrecy performance. Using these closed-form expressions, we further determine the optimal switching threshold and obtain the optimal power allocation factor between the BS and jammer node for both schemes to minimize the secrecy outage probability, while the optimal secrecy rate is decided to maximize the effective secrecy throughput for both schemes. Numerical results are provided to verify the theoretical analysis and illustrate the impact of key system parameters on the secrecy performance.
In this paper, we consider physical layer security in wireless communication networks in which a source (Alice) intends to send a confidential message to a legitimate destination (Bob) with the help of a cooperative jammer (CJ), in the presence of a passive eavesdropper (Eve). Assuming that only statistical channel state information (CSI) of Eve is available, artificial-noise (AN) assisted beamforming and cooperative jamming are designed. The goal is to maximize the secrecy rate, subject to a constraint on secrecy outage probability. Numerical results validate the effectiveness of our scheme. Moreover, a higher secure energy efficiency (EE) can be achieved as compared with other schemes without a cooperative jammer.