Sensors based on single spins can enable magnetic-field detection with very high sensitivity and spatial resolution. Previous work has concentrated on sensing of a constant magnetic field or a periodic signal. Here, we instead investigate the problem of estimating a field with nonperiodic variation described by a Wiener process. We propose and study, by numerical simulations, an adaptive tracking protocol based on Bayesian estimation. The tracking protocol updates the probability distribution for the magnetic field based on measurement outcomes and adapts the choice of sensing time and phase in real time. By taking the statistical properties of the signal into account, our protocol strongly reduces the required measurement time. This leads to a reduction of the error in the estimation of a time-varying signal by up to a factor of four compare with protocols that do not take this information into account.
Sensors based on single spins can enable magnetic-field detection with very high sensitivity and spatial resolution. Previous work has concentrated on sensing of a constant magnetic field or a periodic signal. Here, we instead investigate the problem of estimating a field with nonperiodic variation described by a Wiener process. We propose and study, by numerical simulations, an adaptive tracking protocol based on Bayesian estimation. The tracking protocol updates the probability distribution for the magnetic field based on measurement outcomes and adapts the choice of sensing time and phase in real time. By taking the statistical properties of the signal into account, our protocol strongly reduces the required measurement time. This leads to a reduction of the error in the estimation of a time-varying signal by up to a factor of four compare with protocols that do not take this information into account.
Single-spin quantum sensors, for example based on nitrogen-vacancy centres in diamond, provide nanoscale mapping of magnetic fields. In applications where the magnetic field may be changing rapidly, total sensing time is crucial and must be minimised. Bayesian estimation and adaptive experiment optimisation can speed up the sensing process by reducing the number of measurements required. These protocols consist of computing and updating the probability distribution of the magnetic field based on measurement outcomes and of determining optimized acquisition settings for the next measurement. However, the computational steps feeding into the measurement settings of the next iteration must be performed quickly enough to allow real-time updates. This article addresses the issue of computational speed by implementing an approximate Bayesian estimation technique, where probability distributions are approximated by a finite sum of Gaussian functions. Given that only three parameters are required to fully describe a Gaussian density, we find that in many cases, the magnetic field probability distribution can be described by fewer than ten parameters, achieving a reduction in computation time by factor 10 compared to existing approaches. ForT2*=1μs, only a small decrease in computation time is achieved. However, in these regimes, the proposed Gaussian protocol outperforms the existing one in tracking accuracy.
The extraction of weak signals plays a crucial role in quantum precision measurement, where the estimation results are often limited by low signal-to-noise ratios. Here, we demonstrate a parameter-estimation framework based on the adaptive extended Kalman filter for dynamic magnetic-field estimation in quantum systems using spin-noise measurements -- a challenging regime characterized by weak signals. By modeling the magnetic field as an unknown parameter, the proposed approach alleviates model dependence in state estimation. Furthermore, by introducing an adaptive algorithm with real-time noise estimation, our method overcomes the measurement noise intensity constraints of conventional extended Kalman filtering and enhances its practical applicability. Numerical simulations covering three representative magnetic-field dynamics validate the capability of the proposed framework, while experimental results demonstrate successful tracking of a seismo-magnetic-like signal beyond the intrinsic sensitivity of conventional spin-noise spectroscopy.
Quantum information protocols, such as quantum error correction and quantum phase estimation, have been widely used to enhance the performance of quantum sensors. While these protocols have relied on single-shot detection, in most practical applications only an averaged readout is available, as in the case of room-temperature sensing with the electron spin associated with a nitrogen-vacancy center in diamond. Here, we theoretically investigate the application of the quantum phase estimation algorithm for high dynamic-range magnetometry, when single-shot readout is not available. We show that, even in this case, Bayesian estimation provides a natural way to efficiently use the available information. We apply Bayesian analysis to achieve an optimized sensing protocol for estimating a time-independent magnetic field with a single electron spin associated to a nitrogen-vacancy center at room temperature and show that this protocol improves the sensitivity over previous protocols by more than a factor of 3. Moreover, we show that an extra enhancement can be achieved by considering the timing information in the detector clicks.
Quantum sensing harnesses the unique properties of quantum systems to enable precision measurements of physical quantities such as time, magnetic and electric fields, acceleration, and gravitational gradients well beyond the limits of classical sensors. However, identifying suitable sensing probes and measurement schemes can be a classically intractable task, as it requires optimizing over Hilbert spaces of high dimension. In variational quantum sensing, a probe quantum system is generated via a parameterized quantum circuit (PQC), exposed to an unknown physical parameter through a quantum channel, and measured to collect classical data. PQCs and measurements are typically optimized using offline strategies based on frequentist learning criteria. This paper introduces an adaptive protocol that uses Bayesian inference to optimize the sensing policy via the maximization of the active information gain. The proposed variational methodology is tailored for non-asymptotic regimes where a single probe can be deployed in each time step, and is extended to support the fusion of estimates from multiple quantum sensing agents.
Localized spins in the solid state are attracting widespread attention as highly sensitive quantum sensors with nanoscale spatial resolution and fascinating applications. Recently, adaptive measurements were used to improve the dynamic range for spin-based sensing of deterministic Hamiltonian parameters. Here we explore a very different direction—spin-based adaptive sensing of random noises. First, we identify distinguishing features for the sensing of magnetic noises compared with the estimation of deterministic magnetic fields, such as the different dependences on the spin decoherence, the different optimal measurement schemes, the absence of the modulo-2 π phase ambiguity, and the crucial role of adaptive measurement. Second, we perform numerical simulations that demonstrate significant speed up of the characterization of the spin decoherence time via adaptive measurements. This paves the way towards adaptive noise sensing and coherence protection.
A measurement of a single-qubit quantum sensor reveals at most 1 bit of information about the signal that was sensed. To perform a classification task on the signal, the conventional approach is to repeat a sensing protocol many times, averaging the measurement results to obtain a high-precision estimate of the sensed signal, and then to apply classical postprocessing. Quantum computational sensing (QCS) is an alternative approach that breaks with the paradigm of first obtaining a classical estimate of the signal and then computing a function of the estimated signal in postprocessing. QCS instead combines quantum sensing with quantum computing to concentrate information about the signal relevant to the task into the solitary bit revealed by each measurement. Here, we report on the experimental demonstration of QCS where sensing and computing were both performed by the same single superconducting transmon qubit. We consider various binary classification tasks based on static and oscillating magnetic fields induced by current through a flux line. The fields were sensed through a double-junction superconducting quantum interference device (SQUID) loop that was part of the qubit. We used a protocol based on quantum signal processing to preprocess the sensed signals in the quantum domain prior to measurement. For tasks on static magnetic fields, our protocol outperformed the conventional baseline of Ramsey-based phase estimation by as much as 15 percentage points. For tasks on oscillating magnetic fields, we classified signal amplitude and frequency with up to 20 and 15 percentage points higher accuracy, respectively, compared to the conventional baseline of optimized dynamical-decoupling protocols. Our results illustrate how quantum computing can enhance quantum sensing even with a minimally sized quantum system subject to the practical limitations of decoherence and error-prone operations.