A measurement of a single-qubit quantum sensor reveals at most 1 bit of information about the signal that was sensed. To perform a classification task on the signal, the conventional approach is to repeat a sensing protocol many times, averaging the measurement results to obtain a high-precision estimate of the sensed signal, and then to apply classical postprocessing. Quantum computational sensing (QCS) is an alternative approach that breaks with the paradigm of first obtaining a classical estimate of the signal and then computing a function of the estimated signal in postprocessing. QCS instead combines quantum sensing with quantum computing to concentrate information about the signal relevant to the task into the solitary bit revealed by each measurement. Here, we report on the experimental demonstration of QCS where sensing and computing were both performed by the same single superconducting transmon qubit. We consider various binary classification tasks based on static and oscillating magnetic fields induced by current through a flux line. The fields were sensed through a double-junction superconducting quantum interference device (SQUID) loop that was part of the qubit. We used a protocol based on quantum signal processing to preprocess the sensed signals in the quantum domain prior to measurement. For tasks on static magnetic fields, our protocol outperformed the conventional baseline of Ramsey-based phase estimation by as much as 15 percentage points. For tasks on oscillating magnetic fields, we classified signal amplitude and frequency with up to 20 and 15 percentage points higher accuracy, respectively, compared to the conventional baseline of optimized dynamical-decoupling protocols. Our results illustrate how quantum computing can enhance quantum sensing even with a minimally sized quantum system subject to the practical limitations of decoherence and error-prone operations.
A measurement of a single-qubit quantum sensor reveals at most 1 bit of information about the signal that was sensed. To perform a classification task on the signal, the conventional approach is to repeat a sensing protocol many times, averaging the measurement results to obtain a high-precision estimate of the sensed signal, and then to apply classical postprocessing. Quantum computational sensing (QCS) is an alternative approach that breaks with the paradigm of first obtaining a classical estimate of the signal and then computing a function of the estimated signal in postprocessing. QCS instead combines quantum sensing with quantum computing to concentrate information about the signal relevant to the task into the solitary bit revealed by each measurement. Here, we report on the experimental demonstration of QCS where sensing and computing were both performed by the same single superconducting transmon qubit. We consider various binary classification tasks based on static and oscillating magnetic fields induced by current through a flux line. The fields were sensed through a double-junction superconducting quantum interference device (SQUID) loop that was part of the qubit. We used a protocol based on quantum signal processing to preprocess the sensed signals in the quantum domain prior to measurement. For tasks on static magnetic fields, our protocol outperformed the conventional baseline of Ramsey-based phase estimation by as much as 15 percentage points. For tasks on oscillating magnetic fields, we classified signal amplitude and frequency with up to 20 and 15 percentage points higher accuracy, respectively, compared to the conventional baseline of optimized dynamical-decoupling protocols. Our results illustrate how quantum computing can enhance quantum sensing even with a minimally sized quantum system subject to the practical limitations of decoherence and error-prone operations.
Quantum computational sensing (QCS) combines quantum sensing with quantum computing to extract task-relevant information from the physical world. QCS can in principle achieve an accuracy advantage for specific tasks versus the alternative of raw-signal estimation using conventional quantum sensing followed by task-specific classical postprocessing. Here we report the experimental demonstration of quantum computational displacement sensing (QCDS) with a superconducting circuit comprising a qubit coupled to an oscillator. We consider binary classification sensing tasks, where the goal is to predict the class label of a single complex-valued displacement sensed once by the oscillator. Rather than estimating the displacement, our computational-sensing protocol -- using parameterized quantum circuits before and after sensing -- attempts to determine the binary class label using quantum processing and map it onto the ground or excited state of the qubit. A single measurement of the qubit directly outputs the prediction. We implemented circuits with up to 24 entangling gates and 38 free parameters, which were trained in silico. We show that increasing the circuit depth systematically improves expressivity and classification accuracy. We experimentally obtained an accuracy advantage over a suite of protocols that first use conventional quantum sensing to estimate the displacement before using classical postprocessing to perform prediction. For certain tasks, our protocol achieves a 15-percentage-points higher classification accuracy than most conventional approaches considered. Our results establish the feasibility of quantum computational sensing with noisy superconducting hardware and illustrate how integrating quantum computation with quantum sensing can enhance performance when the goal is to estimate a property or function of a signal rather than to estimate the signal.
Abstract Combining quantum sensing with quantum computing can lead to quantum computational sensing (QCS) protocols that are able to more efficiently extract task-specific information from physical signals than is possible otherwise. In this paper, we present, in theory and numerical simulations, the application of two quantum algorithms—quantum signal processing and quantum neural networks—to various binary and multiclass machine-learning classification tasks in sensing. Here, sensing operations are interleaved with computing operations, giving rise to nonlinear functions of the sensed signals. Our approach to optimizing QCS protocols takes into account quantum sampling noise and allows us to engineer protocols that can yield accurate results with as few as just a single measurement shot. In all cases, we have been able to show a regime of operation where a quantum computational sensor can achieve higher accuracy than a conventional quantum sensor for a given budget of sensing time, with a simulated accuracy advantage of >20 percentage points for some tasks. We also present protocols for performing nonlinear tasks using Hamiltonian-engineered bosonic systems and quantum signal processing with hybrid qubit-bosonic systems, and empirically show an advantage when the received signal has a limited mean photon number.
The combination of quantum sensing with quantum computing to provide an enhancement over conventional quantum sensing has recently emerged as a promising potential application of quantum computing that could give advantages without needing large-scale or fault-tolerant hardware. In this work, we report an experimental demonstration of a recent theoretical proposal to repurpose Grover's search algorithm to improve the ability to detect signals with unknown frequency within a large detection bandwidth. Our experiments were based on a system comprising a single superconducting qubit coupled to a single superconducting cavity, highlighting the modest hardware requirements for realizing the protocol. We found that Grover-based sensing was able to outperform the natural non-Grover baseline for our experimental platform for detection bandwidths $>10MHz,withanadvantagethatempiricallygrewsuperlinearlywiththebandwidthbeyondthatbreak−evenpoint.TheuseoftheGrover−basedprotocolreducedtheamountofsignalthatneededtobesensedtomakeanaccuratedetectiondecisionbymorethan10\times$ for choices of larger detection bandwidth and higher desired detection accuracy. Our results provide a proof-of-principle validation that Grover-based quantum computational sensing can be realized in near-term hardware and provide a metrological advantage well beyond break-even in spite of the additional protocol complexity.
Quantum metrology based on superconducting qubits offers unprecedented precision in measuring fundamental physical quantities, particularly magnetic fields. In this study, we develop a modified quantum phase estimation algorithm utilizing superconducting qubits, enhanced by optimized initial state preparation, significantly improving measurement sensitivity and reducing estimation times compared to conventional techniques. To ensure practical applicability and robustness, we incorporate advanced noise modeling, including intrinsic decoherence effects such as flux-induced noise and Purcell losses. Through detailed analytical modeling and numerical simulations, we systematically evaluate sensitivity and practical implementation constraints across various superconducting qubit architectures—transmon, fluxonium, conventional flux, and C-shunt flux qubits. Our approach quantifies the critical trade-offs between coherence, measurement dynamics, and sensitivity, identifying optimal operational regimes for high-performance quantum sensing. We introduce custom circuit simulation methods enabling the analysis and optimization of arbitrary superconducting quantum devices. Our findings provide a framework for advancing quantum-enhanced magnetometry and promise to facilitate next-generation quantum sensors for fundamental physics research, gravitational field measurements, and quantum-assisted searches for dark matter candidates.
Abstract Sensing and metrology are crucial in both fundamental science and practical applications. They meet the constant demand for precise data, enabling more dependable assessments of theoretical models’ validity. Sensors, now a common feature in many fields, play a vital role in applications like gravity imaging, geology, navigation, security, timekeeping, spectroscopy, chemistry, magnetometry, healthcare, and medicine. The advancements in quantum technologies have sparked interest in employing quantum systems as sensors, offering enhanced capabilities and new possibilities. This article describes the optimization of the quantum-enhanced sensing of magnetic fluxes with a Kitaev phase estimation algorithm based on frequency tunable transmon qubits. It provides the optimal flux biasing point for sensors with different qubit transition frequencies and gives an estimation of decoherence rates and achievable sensitivity. The use of 2- and 3-qubit entangled states are compared in simulation with the single-qubit case. The flux sensing accuracy reaches 10 − 8 ⋅ Φ 0 and scales inversely with time, which proves the speed-up of sensing with high ultimate accuracy.
Quantum algorithms offer computational advantages, yet incorporating them into quantum sensing and converting these advantages into enhanced information acquisition remains challenging. Here, we realize quantum-computing-enhanced sensing in a spin-oscillator architecture, where a microwave cavity provides a high-dimensional quantum register and a coupled superconducting qubit serves as the sensor. The unknown signal directly generates the phase oracle operation, establishing a natural physical interface between quantum computation and sensing. We experimentally demonstrate the first Grover search in a bosonic mode and observe quantum amplitude amplification in a Hilbert space spanning more than 128 photons. For the same number of sensing iterations, our protocol extracts more information and resolves more frequency candidates than classical sequential search. Our results establish signal-driven oracles as a route for harnessing oracle-based quantum algorithms and realizing quantum-computing-enhanced sensing.