Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1703.03672 · Quantum Science and Technology

Coherent control in quantum transport: amplification, filtering and switching at finite bias

Rajpal Thethi, Clive Emary

Published May 12, 2017• 1 citation
arXivHTMLPDF

Abstract

Abstract We consider coherent feedback control of quantum transport and focus on the application of simple controllers and the effects of a finite bias voltage. We show that simple single-parameter controllers can give rise to a range of useful effects such as amplification of changes in plant transmission, increased resolution of energy filtration, and the detection of differences between otherwise indistinguishable plants. We explore how these effects are impacted by the phase-averaging effects associated with finite bias and identify important voltage scales for the maintenance of the functionalities achieved through feedback control.

DOI
10.1088/2058-9565/aa72c8

Related papers

Coherent feedback control of quantum transport at finite bias

Rajpal Thethi

Feedback is a fundamental and well-understood method of control used since ancient times; this thesis investigates coherent feedback control in a quantum Hall regime. Quantum Feedback requires a level of isolation from measurement in order to maintain the coherence of the electron wavefunction, unlike the classical variant of feedback where measurement is commonplace as information is easily duplicated. Here we build upon a Landauer Büttiker model for electrons as flying qubits in a closed feedback arrangement which uses scattering matrices to represent and connect the elements of the feedback device to better analyse the qualities that modify feedback effects in a variety of systems. Here we will also investigate the effects of finite bias at each stage of the thesis, with a focus on what effect it has on the function of the feedback system and the extent of the effect depending on how feedback is employed.

•Jan 1, 2019•0 citations

Delayed feedback control in quantum transport

Clive Emary

Feedback control in quantum transport has been predicted to give rise to several interesting effects, among them quantum state stabilization and the realization of a mesoscopic Maxwell's daemon. These results were derived under the assumption that control operations on the system are affected instantaneously after the measurement of electronic jumps through it. In this contribution, I describe how to include a delay between detection and control operation in the master equation theory of feedback-controlled quantum transport. I investigate the consequences of delay for the state stabilization and Maxwell's daemon schemes. Furthermore, I describe how delay can be used as a tool to probe coherent oscillations of electrons within a transport system and how this formalism can be used to model finite detector bandwidth.

arXiv:1207.2910•Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences•Aug 20, 2013•17 citations

Feedback control of quantum systems : modelling, stabilisation and estimation

Zibo Miao

Quantum engineering has seen rapid growth in the past two decades. Physicists, mathematicians and engineers have been working in unison to control a number of diverse systems in the quantum regime. Quantum control involving feedback has become particularly topical, as using information gained from a system can lead to more stable operation of a control protocol. Quantum feedback can be split into two paradigms: measurement based feedback and coherent feedback. Although it is increasingly evident that retaining the coherence of the feedback signal provides an intrinsic advantage over measurement-based feedback, coherent feedback is still a new paradigm. In particular, there are a limited number of options for coherently estimating a state within a feedback loop. As a step towards better understanding and implementation of quantum feedback, this thesis reports on modelling, estimation and control of quantum systems. The first topic is physical realisability of a variety of quantum systems, especially finite level systems and their outgrowths. Bilinear quantum stochastic differential equations (QSDEs) have to be employed to characterise these systems, which is a significant complement to the previous work on linear QSDEs. In light of the fact that direct and indirect couplings play a vital role in quantum network and control, we also provide state-space models for different classes of coupled open quantum systems incorporating both bidirectional and directional interactions. The second topic is coherent observers and optimal filtering. It is well established that classically estimation using the Kalman filter can provide improved performance over direct feedback schemes, and similar demonstrations have been performed for measurement-based quantum feedback. In this thesis I present coherent observers, including least mean squares estimators, which are driven by the coherent output of a specified quantum plant and designed such that some subset of the observer and plant's expectation values converge in the asymptotic limit. Not only can estimators "observe" mean quantities of quantum plant, but also they can "estimate" quantum correlations such as entanglement. This is of much importance to coherent feedback design in the absence of measurement steps without loss of fidelity. Last but not least, several topics regarding stabilisation and control design of quantum systems are discussed in my thesis. To be specific, tools for quantum stability analysis (e.g. Lyapunov conditions) are provided. Both measurement-based feedback and coherent feedback control design are taken into account. A measurement-based optimal controller for opto-mechanical systems aimed at synchronising different mechanical modes is presented, which is application-oriented. Moreover, A general observer-based coherent feedback control framework is studied, and I demonstrate a pole-placement approach via coherent observers that can be applied to various scenarios.

•Jan 1, 2015•0 citations

Coherent quantum filtering for physically realizable linear quantum plants

Igor G. Vladimirov, Ian R. Petersen

The paper is concerned with a problem of coherent (measurement-free) filtering for physically realizable (PR) linear quantum plants. The state variables of such systems satisfy canonical commutation relations and are governed by linear quantum stochastic differential equations, dynamically equivalent to those of an open quantum harmonic oscillator. The problem is to design another PR quantum system, connected unilaterally to the output of the plant and playing the role of a quantum filter, so as to minimize a mean square discrepancy between the dynamic variables of the plant and the output of the filter. This coherent quantum filtering (CQF) formulation is a simplified feedback-free version of the coherent quantum LQG control problem which remains open despite recent studies. The CQF problem is transformed into a constrained covariance control problem which is treated by using the Frechet differentiation of an appropriate Lagrange function with respect to the matrices of the filter.

arXiv:1301.3154•European Control Conference (ECC)•Jul 1, 2013•27 citations

Coherent feedback control in quantum transport

Clive Emary, John Edward Gough

This paper adapts control theory to the study of quantum transport in mesoscopic systems. In particular the authors study coherent control where the system as well as the controller are quantum coherent.

arXiv:1407.1306•Physical Review B•Nov 26, 2014•17 citations

Normal-mode splitting in an optomechanical system enhanced by an optical parametric amplifier and coherent feedback

Yue Li, Yijian Wang, Hengxin Sun +2 more

Abstract Normal-mode splitting (NMS) is an evident signature of strong coupling interactions for observing quantum phenomena, such as optomechanical squeezing and entanglement. In the previous literature, optical parametric amplifier (OPA) and coherent feedback are independently proposed to enhance the NMS. Here, we combine OPA and coherent feedback into a single optomechanical system to enhance the NMS. Controllable parameters, such as input optical power, OPA gain and phase, coherent feedback strength, are varied to observe NMS variations. In particular, we consider positive and negative feedback in terms of the amplitude reflectivity of the beam splitter for coherent feedback. The NMS appears mostly with the positive coherent feedback rather than the negative. Furthermore, the largest mode separation occurs at an OPA phase of approximately − π / 4 rather than zero because the effective cavity detuning changes the effective intracavity round-trip phase, and therefore changes the OPA amplification/deamplification condition. The results indicate that the interplay between OPA and coherent feedback can enhance the NMS with more controllable parameter freedoms. This scheme provides a promising way to increase the optomechanical coupling strength, thereby having potential applications in the ground state cooling of a mechanical oscillator, the preparation of optomechanical quantum states, and the sensitive detection of a weak force.

Journal of Optics•May 3, 2023•7 citations
Abstract We consider coherent feedback control of quantum transport and focus on the application of simple controllers and the effects of a finite bias voltage. We show that simple single-parameter controllers can give rise to a range of useful effects such as amplification of changes in plant transmission, increased resolution of energy filtration, and the detection of differences between otherwise indistinguishable plants. We explore how these effects are impacted by the phase-averaging effects associated with finite bias and identify important voltage scales for the maintenance of the functionalities achieved through feedback control.
Feedback is a fundamental and well-understood method of control used since ancient times; this thesis investigates coherent feedback control in a quantum Hall regime. Quantum Feedback requires a level of isolation from measurement in order to maintain the coherence of the electron wavefunction, unlike the classical variant of feedback where measurement is commonplace as information is easily duplicated. Here we build upon a Landauer Büttiker model for electrons as flying qubits in a closed feedback arrangement which uses scattering matrices to represent and connect the elements of the feedback device to better analyse the qualities that modify feedback effects in a variety of systems. Here we will also investigate the effects of finite bias at each stage of the thesis, with a focus on what effect it has on the function of the feedback system and the extent of the effect depending on how feedback is employed.
Feedback control in quantum transport has been predicted to give rise to several interesting effects, among them quantum state stabilization and the realization of a mesoscopic Maxwell's daemon. These results were derived under the assumption that control operations on the system are affected instantaneously after the measurement of electronic jumps through it. In this contribution, I describe how to include a delay between detection and control operation in the master equation theory of feedback-controlled quantum transport. I investigate the consequences of delay for the state stabilization and Maxwell's daemon schemes. Furthermore, I describe how delay can be used as a tool to probe coherent oscillations of electrons within a transport system and how this formalism can be used to model finite detector bandwidth.
Quantum engineering has seen rapid growth in the past two decades. Physicists, mathematicians and engineers have been working in unison to control a number of diverse systems in the quantum regime. Quantum control involving feedback has become particularly topical, as using information gained from a system can lead to more stable operation of a control protocol. Quantum feedback can be split into two paradigms: measurement based feedback and coherent feedback. Although it is increasingly evident that retaining the coherence of the feedback signal provides an intrinsic advantage over measurement-based feedback, coherent feedback is still a new paradigm. In particular, there are a limited number of options for coherently estimating a state within a feedback loop. As a step towards better understanding and implementation of quantum feedback, this thesis reports on modelling, estimation and control of quantum systems. The first topic is physical realisability of a variety of quantum systems, especially finite level systems and their outgrowths. Bilinear quantum stochastic differential equations (QSDEs) have to be employed to characterise these systems, which is a significant complement to the previous work on linear QSDEs. In light of the fact that direct and indirect couplings play a vital role in quantum network and control, we also provide state-space models for different classes of coupled open quantum systems incorporating both bidirectional and directional interactions. The second topic is coherent observers and optimal filtering. It is well established that classically estimation using the Kalman filter can provide improved performance over direct feedback schemes, and similar demonstrations have been performed for measurement-based quantum feedback. In this thesis I present coherent observers, including least mean squares estimators, which are driven by the coherent output of a specified quantum plant and designed such that some subset of the observer and plant's expectation values converge in the asymptotic limit. Not only can estimators "observe" mean quantities of quantum plant, but also they can "estimate" quantum correlations such as entanglement. This is of much importance to coherent feedback design in the absence of measurement steps without loss of fidelity. Last but not least, several topics regarding stabilisation and control design of quantum systems are discussed in my thesis. To be specific, tools for quantum stability analysis (e.g. Lyapunov conditions) are provided. Both measurement-based feedback and coherent feedback control design are taken into account. A measurement-based optimal controller for opto-mechanical systems aimed at synchronising different mechanical modes is presented, which is application-oriented. Moreover, A general observer-based coherent feedback control framework is studied, and I demonstrate a pole-placement approach via coherent observers that can be applied to various scenarios.
The paper is concerned with a problem of coherent (measurement-free) filtering for physically realizable (PR) linear quantum plants. The state variables of such systems satisfy canonical commutation relations and are governed by linear quantum stochastic differential equations, dynamically equivalent to those of an open quantum harmonic oscillator. The problem is to design another PR quantum system, connected unilaterally to the output of the plant and playing the role of a quantum filter, so as to minimize a mean square discrepancy between the dynamic variables of the plant and the output of the filter. This coherent quantum filtering (CQF) formulation is a simplified feedback-free version of the coherent quantum LQG control problem which remains open despite recent studies. The CQF problem is transformed into a constrained covariance control problem which is treated by using the Frechet differentiation of an appropriate Lagrange function with respect to the matrices of the filter.
Abstract Normal-mode splitting (NMS) is an evident signature of strong coupling interactions for observing quantum phenomena, such as optomechanical squeezing and entanglement. In the previous literature, optical parametric amplifier (OPA) and coherent feedback are independently proposed to enhance the NMS. Here, we combine OPA and coherent feedback into a single optomechanical system to enhance the NMS. Controllable parameters, such as input optical power, OPA gain and phase, coherent feedback strength, are varied to observe NMS variations. In particular, we consider positive and negative feedback in terms of the amplitude reflectivity of the beam splitter for coherent feedback. The NMS appears mostly with the positive coherent feedback rather than the negative. Furthermore, the largest mode separation occurs at an OPA phase of approximately − π / 4 rather than zero because the effective cavity detuning changes the effective intracavity round-trip phase, and therefore changes the OPA amplification/deamplification condition. The results indicate that the interplay between OPA and coherent feedback can enhance the NMS with more controllable parameter freedoms. This scheme provides a promising way to increase the optomechanical coupling strength, thereby having potential applications in the ground state cooling of a mechanical oscillator, the preparation of optomechanical quantum states, and the sensitive detection of a weak force.