Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1611.03937 · APL Photonics

All-optical switching via four-wave mixing Bragg scattering in a silicon platform

Yun Zhao, David Lombardo, Jay Mathews, Imad H. Agha

Published Jan 10, 2017• 26 citations
arXivHTMLPDF

Abstract

We employ the process of non-degenerate four-wave mixing Bragg scattering to demonstrate all-optical control in a silicon platform. In our configuration, a strong, non-information-carrying pump is mixed with a weak control pump and an input signal in a silicon-on-insulator waveguide. Through the optical nonlinearity of this highly confining waveguide, the weak pump controls the wavelength conversion process from the signal to an idler, leading to a controlled depletion of the signal. The strong pump, on the other hand, plays the role of a constant bias. In this work, we show experimentally that it is possible to implement this low-power switching technique as a first step towards universal optical logic gates, and test the performance with random binary data. Even at very low powers, where the signal and control pump levels are almost equal, the eye-diagrams remain open, indicating a successful operation of the logic gates.

DOI
10.1063/1.4973771

Related papers

Low switching-power low-noise wavelength conversion in silicon waveguides

Yun Zhao, David Lombardo, Andrew M. Sarangan +1 more

We demonstrate low-noise low-power four-wave mixing Bragg scattering in a silicon-on-insulator platform as a possible controlled all-optical switch. Efficiency and quantum noise measurements are performed to verify the viability of the device.

OSA Advanced Photonics Congress•Jan 1, 2016•0 citations

All-optical power-controlled switching in four-wave mixing

Yang Zhao

The use of four-wave mixing as an all-optical switching device is described. The switching process involves strong pump depletion and results from large-signal interactions. Interesting relationships among the input, the optical control, and the output signals and the parameters of the nonlinear medium are identified.

Optics Letters•Oct 1, 1989•2 citations

Towards quantum frequency conversion via non-degenerate four-wave mixing in nanophotonic waveguides

Marcelo Davanço, Bryce Thurston, Kartik A. Srinivasan

Low-noise wavelength conversion through non-degenerate four-wave-mixing Bragg scattering in SiNx waveguides is demonstrated. Two 1550 nm pumps are used to achieve tunable conversion of a 980 nm signal over a range of 10 nm.

Conference on Lasers and Electro-Optics•Jan 1, 2012•0 citations

Low-noise chip-based frequency conversion by four-wave-mixing Bragg scattering in SiN_x waveguides

Imad H. Agha, Marcelo Davanço, Bryce Thurston +1 more

Low-noise, tunable wavelength-conversion through nondegenerate four-wave mixing Bragg scattering in SiN(x) waveguides is experimentally demonstrated. Finite element method simulations of waveguide dispersion are used with the split-step Fourier method to predict device performance. Two 1550 nm wavelength band pulsed pumps are used to achieve tunable conversion of a 980 nm signal over a range of 5 nm with a peak conversion efficiency of ≈5%. The demonstrated Bragg scattering process is suitable for frequency conversion of quantum states of light.

arXiv:1203.6558•Optics Letters•Jul 13, 2012•70 citations

Non-resonant Bragg scattering four-wave mixing at near-visible wavelengths in low-confinement silicon nitride waveguides

Nicholas Jaber, Scott E. Madaras, Andrew Starbuck +5 more

Quantum state coherent frequency conversion processes—such as Bragg-scattering four-wave mixing (BSFWM)—hold promise as a flexible technique for networking heterogeneous and distant quantum systems. In this Letter, we demonstrate BSFWM within an extended (1.2-m) low-confinement silicon nitride waveguide and show that this system has the potential for near-unity frequency conversion in visible and near-visible wavelength ranges. Using sensitive classical heterodyne laser spectroscopy at low optical powers, we characterize the Kerr coefficient (∼1.55 W−1m−1) and linear propagation loss (∼0.0175 dB/cm) of this non-resonant waveguide system, revealing a record-high nonlinear figure of merit (NFM = γ/α ≈ 3.85 W−1) for BSFWM of near-visible light in non-resonant silicon nitride waveguides. We predict how, at high yet achievable on-chip optical powers, this NFM would yield a comparatively large frequency conversion efficiency, opening the door to near-unity flexible frequency conversion without cavity enhancement and resulting bandwidth constraints.

arXiv:2401.07185•Optics Letters•Apr 11, 2024•4 citations

Broad wavelength generation and conversion with multi modal Four Wave Mixing in silicon waveguides

Stefano Signorini, Mattia Mancinelli, Martino Bernard +3 more

The possibility to perform broad wavelength generation and conversion is of great interest in classical and quantum optics. With the introduction of integrated nonlinear silicon photonics, these tasks have been made even more viable thanks to the combination of the high nonlinear refractive index of silicon with the high confinement provided by the photonic waveguides. Exploiting this platform, several solutions for wavelength conversion have been investigated, for both optical processing [1] and applications in the Mid Infrared (MIR) [2]. The possibility to perform broad and controllable wavelength generation can be exploited also for creating integrated sources of quantum states of light based on single photons [3] or correlated photon pairs [4]. Both the generation and conversion can be accomplished by means of Four Wave Mixing (FWM). FWM is a nonlinear optical process in which two pump photons at frequency are converted into signal and idler photons at frequencies and ω/ respectively (with ωI/ωS). In the particular case of wavelength conversion, FWM is stimulated by a seed wave at the same wavelength of the signal (idler) that will be converted to the wavelength of the idler (signal). FWM has to satisfy the energy conservation, according to which the relation ωP+ ωP= ωS+ ωIholds, and its efficiency is ruled by the phase matching condition. This latter condition is related to the phase mismatch among the waves involved in the FWM process, that is evaluated as Δk = kp+ kp−kS−kI, where kP, kS, kIare the wavevectors for the pump, the signal and the idler, respectively. When Δk = 0, the phase matching condition is fulfilled and the efficiency of FWM is maximized. What is important for wavelength generation and conversion is the spectral position of the phase matching condition, which determines the wavelength at which the maximum efficiency of the conversion or generation process is achieved. Because of this, techniques for the control of the phase matching condition have been developed, focusing on the possibility to tailor the Group Velocity Dispersion (GVD) through a proper engineering of the waveguide geometry [5]. While these techniques consider only the first order waveguide mode, here we propose to exploit the higher order modes propagating inside a multimode waveguide. The dispersion of the higher order modes can be used to tune the spectral position of the phase matching condition for the FWM process, achieving controllable and large spectral translation in both Stimulated Four Wave Mixing (sFWM) and Spontaneous Four Wave Mixing (SFWM).

IEEE International Conference on Group IV Photonics (GFP)•Aug 1, 2017•7 citations
We employ the process of non-degenerate four-wave mixing Bragg scattering to demonstrate all-optical control in a silicon platform. In our configuration, a strong, non-information-carrying pump is mixed with a weak control pump and an input signal in a silicon-on-insulator waveguide. Through the optical nonlinearity of this highly confining waveguide, the weak pump controls the wavelength conversion process from the signal to an idler, leading to a controlled depletion of the signal. The strong pump, on the other hand, plays the role of a constant bias. In this work, we show experimentally that it is possible to implement this low-power switching technique as a first step towards universal optical logic gates, and test the performance with random binary data. Even at very low powers, where the signal and control pump levels are almost equal, the eye-diagrams remain open, indicating a successful operation of the logic gates.
Low-noise, tunable wavelength-conversion through nondegenerate four-wave mixing Bragg scattering in SiN(x) waveguides is experimentally demonstrated. Finite element method simulations of waveguide dispersion are used with the split-step Fourier method to predict device performance. Two 1550 nm wavelength band pulsed pumps are used to achieve tunable conversion of a 980 nm signal over a range of 5 nm with a peak conversion efficiency of ≈5%. The demonstrated Bragg scattering process is suitable for frequency conversion of quantum states of light.
Quantum state coherent frequency conversion processes—such as Bragg-scattering four-wave mixing (BSFWM)—hold promise as a flexible technique for networking heterogeneous and distant quantum systems. In this Letter, we demonstrate BSFWM within an extended (1.2-m) low-confinement silicon nitride waveguide and show that this system has the potential for near-unity frequency conversion in visible and near-visible wavelength ranges. Using sensitive classical heterodyne laser spectroscopy at low optical powers, we characterize the Kerr coefficient (∼1.55 W−1m−1) and linear propagation loss (∼0.0175 dB/cm) of this non-resonant waveguide system, revealing a record-high nonlinear figure of merit (NFM = γ/α ≈ 3.85 W−1) for BSFWM of near-visible light in non-resonant silicon nitride waveguides. We predict how, at high yet achievable on-chip optical powers, this NFM would yield a comparatively large frequency conversion efficiency, opening the door to near-unity flexible frequency conversion without cavity enhancement and resulting bandwidth constraints.
The possibility to perform broad wavelength generation and conversion is of great interest in classical and quantum optics. With the introduction of integrated nonlinear silicon photonics, these tasks have been made even more viable thanks to the combination of the high nonlinear refractive index of silicon with the high confinement provided by the photonic waveguides. Exploiting this platform, several solutions for wavelength conversion have been investigated, for both optical processing [1] and applications in the Mid Infrared (MIR) [2]. The possibility to perform broad and controllable wavelength generation can be exploited also for creating integrated sources of quantum states of light based on single photons [3] or correlated photon pairs [4]. Both the generation and conversion can be accomplished by means of Four Wave Mixing (FWM). FWM is a nonlinear optical process in which two pump photons at frequency are converted into signal and idler photons at frequencies and ω/ respectively (with ωI/ωS). In the particular case of wavelength conversion, FWM is stimulated by a seed wave at the same wavelength of the signal (idler) that will be converted to the wavelength of the idler (signal). FWM has to satisfy the energy conservation, according to which the relation ωP+ ωP= ωS+ ωIholds, and its efficiency is ruled by the phase matching condition. This latter condition is related to the phase mismatch among the waves involved in the FWM process, that is evaluated as Δk = kp+ kp−kS−kI, where kP, kS, kIare the wavevectors for the pump, the signal and the idler, respectively. When Δk = 0, the phase matching condition is fulfilled and the efficiency of FWM is maximized. What is important for wavelength generation and conversion is the spectral position of the phase matching condition, which determines the wavelength at which the maximum efficiency of the conversion or generation process is achieved. Because of this, techniques for the control of the phase matching condition have been developed, focusing on the possibility to tailor the Group Velocity Dispersion (GVD) through a proper engineering of the waveguide geometry [5]. While these techniques consider only the first order waveguide mode, here we propose to exploit the higher order modes propagating inside a multimode waveguide. The dispersion of the higher order modes can be used to tune the spectral position of the phase matching condition for the FWM process, achieving controllable and large spectral translation in both Stimulated Four Wave Mixing (sFWM) and Spontaneous Four Wave Mixing (SFWM).